Tools dies - Import export

Scope of delivery: 1x ball unit table 6x freely positionalable stop bar – long 4x freely positionalable stop bar – short 1x set of bolts anti-tilting Load capacity for tools, dies, injection moulding tools, assembly goods etc. up to: 500 kg – higher loads possible with ball units 022.100 Purposes Setup and dismantling, internal transport, flexible work table e.g. in toolmaking, can be used for forklift trucks, pallet trucks or pallet jacks Advantages Reduced set-up time, safe, flexible, universally applicable, simple and fast handling Safety at work flexible fall protection for conveyed goods, simple and quick tilt protection, stop bars freely positionable in the grid The SUTTY has a CE mark – Quality, made by Schulz!

BPP-1303-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 38 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1302-D18V - battery hydraulic crimping tool, 130 kN, CU400mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 32 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPP-1301-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "13" Two stroke hydraulic system for fast forward Opening jaw: 26 mm Battery: 18V/5Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-130-D18V - battery hydraulic crimping tool, 130 kN, CU300mm² for exchangeable dies series "130-C", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-062-D18V - battery hydraulic crimping tool, 62 kN, CU300mm² for exchangeable dies series "60-CK", "22" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm²1 for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-055-D18V - battery hydraulic crimping tool, 55 kN, CU185mm² for exchangeable dies series "60-H", "5" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPL-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm²1 for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

BPE-035-D18V - battery hydraulic crimping tool, 35 kN, CU150mm² for exchangeable dies series "35", "4" Battery: 18V/2Ah STANLEY-DEWALT Li-Ion battery Four Series of crimping tool Tourable crimping heads Automatic pressure relieve Working pressure 700 bar / 10.000 psi Optional: batteries with different capacity, car-charger AP...-M18 Light series with turnable open C-head. In line design. Equipped with MAKITA Li-Ion battery 18V/1,5 Ah (BL1815), charger DC18RA and case. NEW!!! All 130 kN tools with mechanic stop for saving the dies holder by using the tool without dies.

Instead of mounting one or more Transporters to each die, the PSKS features one unit only – mounted directly to the face of the bolster. A heightadjustable mounting bracket allows flexible usage with multiple tools and dies. The only extra thing needed will be scrap trays in different sizes On the left and right end of the system, heightadjustable brackets with linear bearings support a crossmounted aluminum profile. The profile is fastened with standardized clamping brackets and will transfer the motion over the whole width Numerous trays can be mounted. Two rugged nylon Ushape clamps are permanently fastened to each of the trays. The fasteners are designed to slide and fit snug onto the aluminum profile so that exchanging of trays is just a matter of seconds. The length and width of the tray is determined by the size of the die slot.

HP-60-H - manual hydraulic crimping tool, 55kN, CU185mm² for exchangeable dies series "60-H", "5" Two stroke hydraulic system for fast forward Characteristics turnable crimping head automatic pressure reliefe Manual return is possible in each position working pressure: 700 bar (70 MPa) optional: transport case NEW! HP-131 with mechanical piston protection. ==> Piston will not be demaged by using without dies.

FX-VV HOT for hot parts. A special permanent magnet system allows working temperatures of up to 300°C for a maximum of 5 minutes and of 250°C permanently. Ideal for moving heated tools and dies, or heat-treated workpieces. The FX-VV HOT holds what others drop. We offer a wide range of Permanent Lifting Magnets.

The multi-function unit is a universal C-shaped stationary machine designed for sheet metal utilising industries as a machine for every situation. In respect to working with sheet metal and profiles in aluminium, steel or stainless steel many demands are realised with the multi-function unit MFG 500/150 E. Accordingly the machine is used for clinching, self-piercing riveting, punching, pressing-in and embossing. However a new machine is not needed every time but merely an appropriate tool holder is inserted and the machine is ready for a further task. You can also choose from standardised tool holders or a custom-manufactured tool holder according to your needs. Required tools (punches and dies) and tool holders are not included in the scope of delivery. They must be chosen separately, based on the actual task. Contact us for a customised offer, tools included!

Tool making at GDH Realize with us complex geometries with intelligent tool ideas! GDH is your competent partner for the design and manufacture of tools in sheet metal processing. Do you need high degrees of deformation and difficult contours? Whether as insert, follow-on composite or transfer tool: you pose the challenge, we deliver the solution! Tool Technology: thermoforming Presstools Stampingtools Bendingtools Tool design: Punch Down Tools Progressive dies Transfer tools Type of tools: from the prototype to the serial tool