Results for
TORWEGGE GMBH & CO. KG
Germany
Our flexible ball transfer units provide a simple solution for transporting lightweight to heavy goods along all directions. Our ball transfer units enable you to easily move, rotate and control your conveyed goods. The ball transfer units are constructed so that a very smooth run is possible in all directions, even when moving heavy loads (depending on the version). In a configuration where the ball transfer units are offset from the vertical with overhead mounting, it is possible to achieve a reduction in the load-carrying capacity of up to 50%. Many of our ball transfer units are low-maintenance and feature an oil-soaked felt seal against contamination. Ball transfer units with plastic load balls are excellent for moving loads with delicate surfaces (such as glass, polished aluminum, brass and steel sheet).
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Bolt with head (according to EN 22340) Bolt without head (according to EN 22341) Stud bolts (stress bolts) (according to DIN 2510) Blocking pins Fox bolts (according to DIN 1434 etc.) Spacer bolts Threaded bolts, threaded pins, stud bolts, threaded rods (according to DIN 913-916, 939, 976, 2510) Double-threaded bolts with rolled-on thread on one or both sides
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc.
Request for a quoteVOSSLOH-VERBINDUNGSELEMENTE, INH. MICHAEL VOSSLOH E.K.
Germany
STUD BOLTS THREADED BOLTS CLEVIS PINS DIN 1438 DIN 1445 SPLINT-PIN BOLTS, HEAD BOLTS: DIN 1433 (without head) DIN 1434 (with head) DIN 1435 (with head) DIN 1436 (with head) DIN 1443 ISO 2340 (without head) DIN 1444 ISO 2341 (with head) All bolts based on DIN / EN / ISO or by drawing (modified standard) bolt clevis pin DIN 1445 Material: Machining steel e.g. 9SMn(Pb)28k, 11SMn(Pb)30+C... Carbon Steel e.g. C15, C35, C45... Stainless Steel e.g. 1.4305, 1.4301, 1.4571, 1.4104... Aluminum e.g. AlMgPb, AlMgSi0,5, AlMgSi1... In association with our high qualified partners the supply of hardened and coated standard parts is self-evident. Our products are galvanized on request, painted, anodised, phosphated, zinc flake coated (e.g. GEOMET) etc
Request for a quoteSFS GROUP GERMANY GMBH
Germany
The blind rivet connection itself is a non-detachable connection. However in order to be able to attach further detachable components GESIPA® has the threaded blind rivet in its product range. The threaded blind rivet has a stud with M5 or M6 external thread to which further parts can be mounted using an additional nut.
Request for a quoteWALTER STAUFFENBERG GMBH & CO. KG
Germany
In many areas, stud welding is considered to be the most economic fastening method for components and is sometimes even the only technically feasible solution. Because the stud is joined with the substructure over the entire surface of the stud without any hollow areas, a high strength can be achieved. STAUFF is now using this proven principle for the installation of pipe, tube, hose and cable clamps in the Standard and Twin Series (according to DIN 3015, parts 1 and 3) with M6 mounting thread, where female threaded weld studs replace the regular weld plates; distance plates made from plastic provide the necessary spacing between the clamp bodies and the substructure. If required, the system can also be adopted for alternative fastening methods, e.g. for clamping belts, cable ties or corrugated cable protection hoses. In addition to the individual components – weld studs, distance plates, clamp bodies and metal hardware required – the company also provides the correspondingly...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
KÖSTER & CO. GMBH
Germany
The model SK15 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 3 - 12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body made of fibre-glass reinforced polyamide Control cable plug (4 wire) Optional Integrated shielding gas device
Request for a quoteKÖSTER & CO. GMBH
Germany
The model SK14 is a robust stud welding gun, designed for welding of threaded studs with ceramic ferrules ø 4 - 12 mm Ideal for short cylce stud welding ø 4–12 mm Best for stud welding using shielding gas ø 3 – 12 mm Lifting range 1 – 4,5 mm Standard support with 2 legs High repeatability Body Polyamid Control cable plug (4 wire)
Request for a quoteKÖSTER & CO. GMBH
Germany
Fully controlled power source with thyristor bridge For threaded studs up to 8 mm Designed for welding on building sits Self-diagnosis: Overheating and mains phase failure, short circuit control, malfunction of pilot arc Microprocessor controlled Repeat cycle lock Mains connection special voltages (V): optional Dust and moisture protection of control unit Steel housing, powder-coated Stud counter: standard
Request for a quoteResults for
Threaded stud - Import exportNumber of results
21 ProductsCountries
Company type