Thermal insulation - Import export

Corner and plugin profiles and seat support covers TC products aren’t always apparent at first glance. They often resolve problems in complex assemblies. For instance, they are used to meet the need for a component that has good thermal insulation properties, but is also lightweight and has a high mechanical load capacity. Providing solutions with composite materials Lightweight yet high rigidity and strength Good thermal insulation Freedom in design for customised shapes Highquality, paintable surfaces Undercuts can be created in the profile Universal for radio waves

High-Temperature insulating hose (HT hose) protects heat-conveying lines and prevents thermal damage to adjoining parts with a fiberglass and double-coated silicon rubber top layer. The HT hose is available as a self-contained or re-closable sleeve as well as a custom-made mat. The approximate surface temperature of the duct can be up to 500°C.

Our OHLER product line is specifically designed for use in automobiles and caravans. Novelis is one of the leading suppliers of flexible tubes and hoses for the automotive sector with products used for heat protection, air ducts, exhaust pipes, thermal insulation and energy absorption.

GEOCELL® foam glass aggregate is a high quality product made from post-consumer recycled glass. It meets the highest quality requirements and provides outstanding features, which has no other product in this variety. GEOCELL® is 100 % mineral and combines low density with a high compressive strength. In addition to its very good thermal and sound insulating properties, it is also resistant to moisture, fire, chemicals and aging - a true "all-rounder". This combination of positive properties is providing many advantages and making GEOCELL® suitable for different industries.

The search for solutions in the field of process engineering systems and methods presents us with new challenges every day. Electric heaters for the direct thermal treatment of incoming air in air conditioning systems or as preheater or afterburner for intake air in industrial equipment using intelligent processadapted control systems are gaining an increasing acceptance

Bentley-Harris® Textalu 1202 is an insulative fiberglass sleeving with a heavy aluminum coating designed to protect components in high temperature areas. It provides superior insulation to components that must maintain stable temperatures to assure performance efficiency. Textalu 1202 is used on wire harnesses, sensor control wiring and cable assemblies in close proximity to engines and exhaust systems. Due to its elastic structure, Textalu 1202 conforms well to the variable profiles of the components it protects. Its braided construction allows good flexibility in temperatures as low as -50°C. The infra-red emissivity rating of Textalu 1202 heavy aluminum coating, combined with its fiberglass braid, ensures temperature stability inside the Textalu sleeving despite frequent external temperature fluctuations due to radiant heat.

TEXTALU® E is a thin wall glass fibre braid made of glass fibres with heat-reflecting aluminium coating. Its reflecting surface guarantees that the protective sleeve made of this high-performance material maintains a nearly constant interior temperature even under strongly fluctuating ambient temperatures. This non-ductile braid sleeve is ideal for protecting lines, cables and cable sets against radiation heat.

Optigrun root protection membranes are used on non-root-resistant roof waterproofing under extensive and intensive roof greenings.

Optigrun Protection and Storage Fleece RMS 500 K protects the roof membrane with simultaneous function of separation, water storage, excellent suction and defined filter function. Installation under the green roof structure directly on the waterproofing Protective layer on roof waterproofing with particularly good suction and capillary action Especially to avoid ponding on uneven roofs Puncture resistance 2,600 N (EN ISO 12236)

Optigrun Structured Storage Fleece SSV 800 is used as a protection fleece for pitched roofs with a combined functionality of water storage and drainage.

FLL-certified roof protection layer made of soft PVC for installation on non root-proof roofs, for forming a watertight and root-proof basin on green roofs with water accumulation and as water-proof and root-proof lining in planters.

Thin sheet made from recycled polyethylene for use as a separation, protection and slip sheet.

as a protection, separation and slip layer to protection the waterproofing as a second slip layer in conjunction with PE film 0.2 mm under public areas to prevent the transfer of shear and tensile forces for the chemically neutral separation of two incompatible materials Specific properties resistant to bitumen and polystyrene resistant to most chemicals smooth surface ageing resistant moisture-blocking thermally weldable

Special fleece to protect roofs, providing a combination of protection, separation and glide functions. Suitable for public roofs when its laminated glide layer is used in combination with an approximately 0.2 mm thick PE foil, thus conforming a glide fleece.[Translate to English:] Special fleece to protect the roof waterproofing with a combined separating and sliding function In combination with the PE separating and sliding film TGF 0.2, it is suitable as a protective and sliding layer for traffic roof structures Coefficient of friction with additional PE film <0.6 according to the requirements of the FLL (DIN 53375)

Optigrun Filter Fleece FIL 300 is used as a filtration layer between the drainage and gravel layer on public roofs that are used by trucks and cars.Horizontal filter layer on green roofs between drainage and gravel base layer, under public areas with cars and trucks circulate, as well as pedestrians Filtration of particles from the substrate Puncture resistance 3,800 N (EN ISO 12236) Vertical water permeability 57 l/s x m² (EN ISO 11058) 21 kN/m resp. 24 kN/m max. tensile strenght longitudinal/lateral

Filter fleeces are horizontal filter layers between drainage, substrate or gravel layers. They are used to separate the various layers and prevent fine particles of the substrate from being slurried into the underlying layers.Horizontal filter layer on green roofs between drainage and substrate layers with areas with increased loads Filtration of particles from the substrate Puncture resistance 1.700 N (EN ISO 12236) Vertical water permeability 90 l/s x m² (EN ISO 11058) 10,5 bzw. 10 kN/m max. tensile strenght longitudinal/lateral

Optigrun Filter Fleece FIL 105 is used when the drainage system needs to be protected from fine particles entering from the substrate layer.Horizontal filter layer on green roofs between drainage layer and substrate Filtration of particles from the substrate Puncture resistance 1,200 N (EN ISO 12236) Vertical water permeability 130 l/s x m² (EN ISO 11058) 7,5 kN/m max. tensile strenght longitudinal/lateral

Optigrun Protection and Storage Fleece RMS 1200 protects the roof membrane against damage from high mechanical demands.Protective layer on waterproofing with an additional separating and water reservoir function Particularly suitable as a protective layer on waterproofing with a high mechanical load For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture resistance min. 3,500 N (EN ISO 12236)

Optigrun Protection and Storage Fleece RMS 900 protects the roof membrane against damage from high mechanical demands. Protective layer on waterproofing with an additional separating and water reservoir function Particularly suitable as a protective layer on waterproofing with a moderate mechanical load For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture resistance min. 2,500 N (EN ISO 12236)

Optigreen separating, protective and storage fleeces protect the roof waterproofing or root protection membranes from mechanical stress, separate layers that are incompatible with the material and store water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline With a high pyramid puncture resistance in accordance with DIN EN 14574 Puncture resistance min. 1,500 N (EN ISO 12236)

Optigrun Protection and Storage Fleece RMS 500 protects the roof membrane or root barrier membrane against damage from light mechanical demands, separates the materials of incompatible substrates from one another and, depending on the product and its function as protective fleece, stores water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture restistance min. 1,000 N (EN ISO 12236)

Optigrun Protection and Storage Fleece RMS 300 protects the roof membrane or root barrier membrane against damage from light mechanical demands, separates the materials of incompatible substrates from one another and, depending on the product and its function as protective fleece, stores water.Protective layer on waterproofing with an additional separating and water reservoir function For separation of products made from incompatible materials Fulfills the requirements of the FLL guideline Puncture restistance min. 1,000 N (EN ISO 12236)

• Extreme low consumption • For difficult to access and delicate parts • For automated blasting operations • Adaptable for use with every type of robot • No build up of ice, as thermally insulated • With CO2 quantity controller

• Extreme low consumption • For difficult to access and delicate parts • For manual blasting operations • Adaptable for use with every type of robot • No build up of ice, as thermally insulated • With CO2 quantity controller

• For large surface cleaning • For stubborn contaminations • Very efficient production of CO2 snow particles • Gentle apportioning in compressed air • For manual blasting operations • Adaptable for use with every type of robot • No build up of ice, as thermally insulated • With CO2 quantity controller

Compensates misalignments Quick and easy assemly High thermal stability No maintenance Insulating properties

HR-Structures' lightly thermally insulated industrial halls are equipped with Thermoplane roofing and sandwich panel wall cladding. This combination is the smartest solution for slightly temperature-insensitive goods. The areas of application of our lightly thermally insulated halls: - Storage for slightly temperature-sensitive goods - Protected parking and storage space - Assembly and order picking for all kinds of goods - Maintenance and servicing Roofing by means of Thermoplane is the best solution if no elaborate insulation measures are desired, but condensation and condensation water in the hall are to be avoided. It consists of two shells which are filled with air and thus provide additional insulation. Wall cladding made of sandwich elements is the best way to gain the maximum insulation.

• For automized applications • CO2 consumption is controlled by pressure and temperature • Compact design, overall length 134 mm (5.3") • Customer-specific robot adapter • Weight without robot adapter 3.9 kg (8.7 lb) • No water condensation due to high efficient thermal insulation • Process reliable and maintenance-free in permanent operation • Cleaning width 200 mm (7.8")