Test device - Import export

The multipurpose digital indicator TRANS CAL 7281 can be used wherever there is a need to perform high-precision, in-situ calibrations of sensing components used in equipment such as presses, torque tools or pressure-regulating systems. An optional factory calibration certificate or German-accredited DKD/DAkkS calibration certificate can be provided when the measurement device needs to be used as a reference. This provides a quick and cost-effective way of assessing a system with traceable documentation of measurement results. If a reference measurement cannot be made because the sensor location is difficult to access, it is still possible to test the zero point, the input, output and isolation resistance as well as the calibrating offset of the fitted sensor. It is also possible to check the indicating device by measuring the excitation voltage and simulating the characteristic values (mV/V or V) of the sensor used.

Testing by means of mass flow method - Multi-channel applications possible - Different measuring ranges possible - Electronic pressure regulator - Completely remote controllable - Optionally remote controllable via ProfiNet

Cover for a salt spray test facility The original plexiglass cover of this salt spray test system needed to be replaced by a new, much sturdier cover. This was designed and manufactured by TC on the basis of GRP profiles and GRP sheet material.

Lite version - 1-channel application only - Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, long-life version

Overpressure or vacuum - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design - Multi-channel applications possible

Overpressure or underpressure - Different pressure and measuring ranges - Various operating languages - Optionally with ProfiNet interface and USB interface - Robust, durable design

The COMPENSER® of the CE-series is a nonreversible maintenancefree shock reducing element / shock absorber which can be used for emergency use, for example as a fall protection. If necessary, several deformation tubes (so-called crash element) can be installed in parallel as end stops. Design & Function: The crash element is attached to the support structure using the flange 3. In the event of an impact, the stamp (acting as a mandrel) 1 enters the deformation tube 2 and expands it. Applications: Automated storage and retrieval system | Conveyor system | Storage technology | Automation | Heavy duty | Heavy equipment | Engineering | Crashtest | Flight simulator | Special construction | Special machines | Actuator | Test device | Small parts warehouse | High-bay warehouse | STC | HRL | Storage and retrieval systems (AS/RS) equipment | non reversible | Leakage-free | Shuttle

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

Maximize performance of powder-coating systems POREX ® fluidizing sheets help provide a uniform and evenly distributed air supply stream in powder-coating systems in which powder should flow like water. With our special molding process, fluidizing sheets are developed with consistent pore sizes and airflow characteristics. Fluidizing sheet quality and performance is carefully checked using specially designed test devices and procedures, which ensures confidence with every use. To maximize performance, our fluidizing sheets: Deliver uniform powder distribution – Powder flows like water because the sheet provides a uniform distribution of air. Allow full fluidization – Engineered porous sheets maximize the efficiency of powder-coating systems. Ensure consistent system performance – Special molding process establishes evenly distributed pore sizes and airflow properties. Features Consistent pore structure evenly distributes air stream Strong and rigid for maximum service life and...

The 0.02 class calibration resistors excel in their modern design and small mechanical dimensions. Their ruggedness also ensures a long life. Calibration resistors of the 1240 series are used wherever very constant operating standards are required. Typical main areas of application therefore include: — When normal resistors prove to be too large scale — For test and calibration of resistance measurement devices — For tests on electrical temperature measuring equipment — For laboratory setup of a Wheatstone bridge — As shunt resistor for accurate current measurement — As part of standard equipment in research laboratories — For a large part of measurements in calibration laboratory. Features: — Range 10 μΩ ... 100 kΩ — Low capacitance and low inductance design — Suitable for direct current and technical frequencies — High stability < ± 0.01 % over years

Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. The units are suitable for a number of typical temperature control tasks such as sample temperature control, materials testing, quality control, etc. The devices are fitted with overtemperature and low level protection in line with Safty Class III/FL according to DIN 12876. A powerful pressure/suction pump ensures optimal circulation and temperature homogeneity in the thermostat bath and also allows temperature control of externally connected applications using a pump adapter. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the...

Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. The units are suitable for a number of typical temperature control tasks such as sample temperature control, materials testing, quality control, etc. The devices are fitted with overtemperature and low level protection in line with Safty Class III/FL according to DIN 12876. A powerful pressure/suction pump ensures optimal circulation and temperature homogeneity in the thermostat bath and also allows temperature control of externally connected applications using a pump adapter. The new multi-touch controller Pilot ONE offers a brilliant 5.7" touchscreen with graphic functions and a comfortable navigation menu. All important operating parameters and temperature values are neatly displayed on the...

Heating bath circulation thermostats with a stainless steel bath allow the temperature control of internal and external thermoregulation tasks. Items can be directly thermoregulated by placing them in a thermostat bath and the control of externally connected applications is also possible. The units are suitable for a number of typical temperature control tasks such as sample temperature control, materials testing, quality control, etc. The devices are fitted with overtemperature and low level protection in line with Safty Class III/FL according to DIN 12876. A powerful pressure/suction pump ensures optimal circulation and temperature homogeneity in the thermostat bath and also allows temperature control of externally connected applications using a pump adapter. The new KISS controller combines state-of-the-art technology with simple operation and stylish design. KISS models are suitable for routine tasks in research and industry and are convincing as practice oriented basic...

With the dual chamber PPM leak test stand, Poppe + Potthoff Maschinenbau offers a powerful system for testing sensors in medical device industry. The test stand can be implemented in R&D processes, but also during production as an end of line test. With pressures of up to 50 bars this equipment offers a large spectrum of testing opportunities in the medical area. Some Global Test Standards include: ISO 14644 ASTM G122-96 ASTM D6361 SAE AMS 0302 The PPM leak test stand is able to be programed to the customers requirement. The powerful in house built software enables exact design of pressure curves, such as holding times and exact pressure increase over time. It is an ideal solution for any sorts of plastic components. This exemplarily displayed test bench can utilize air or nitrogen as a test medium. Please get in touch about any other test mediums. In addition the PPM test benches can perform tests of multiple test units at a time.

DPFR-004 Customized Solution for friction measurement of transmission A hand-held enclosure with integrated torque transducer, start buttons and 1 display for torque andf speed. Is used to the friction torque of tapered roller bearing set or monitor. portable Safety circuit by two-hand operation Constant load independent test speed

Customized Solution The mobile testing device may be mounted directly on the wheel nuts on any wheel on the car. The height and tilt adjustment allows optimal orientation at the wheel. Additionally, it is still supported by three proximity sensors. The evaluation and control of the testing device accepts a laptop. For easy transport, the device can be disassembled in a few steps. Curve recording and analysis via notebook. The complete unit is height adjustable via a scissors system. This can also be adapted to different shaft height.

Mobile test device for detection of the maximum torque (drag indicator mode) and for the detection of the power range (constant load) of motors in dental and dental surgical application area. arbitrary loading curves endurance test speed ​​measurement in aluminum case permanently installed Calibration disc and calibration will be in the trunk.

Friction measurement on gear with cam recording with service case In order to reduce the frictional torque in a gearbox from the automotive industry, a measuring device that accompanies the development is required. With the DPFR-027, changes in the design can be measured directly on the product. This means that even the smallest improvements can be determined. The field of application of this test device is extremely diverse and can be easily converted to other applications. Thanks to the mobile design, tests can be carried out under different temperatures and climatic conditions. hand-held drive unit compact slim design constant load-independent test speed selectable direction of rotation and speed additional storage to eliminate lateral forces Acquisition of torque and angle of rotation Graphic recording of the test sequence Storage of the test results in Excel

DRIVE NDT is a cloud-based management software which integrates all NDT inspection methods and associated processes into a single system. With DRIVE NDT you can organize and control the complete NDT job workflow including individual test reports, staff, customer and device management, and much more. One solution for all NDT inspection methods Radiographic Testing (RT-D, RT-F, CT) Ultrasonic Testing (UT-PA, UT-TOFD, UT-WD) Visual Testing (VT) Electromagnetic Testing (ET) Magnetic Particle Testing (MT) Liquid Penetrant Testing (PT) Acoustic Emission Testing (AT) Acoustic Resonance Testing (ART) Infrared/Thermal Testing (IR/TT) Leak Testing (LT) Optical Methods (OM) ...

The transducer is suited for the most varied measurement duties on threaded fasteners, to check and adjust assembly tools, like screwdrivers and spanners, and to sense loosening torques, etc. It can also be deployed in blocked mode to test torque wrenches. The device is powered wirelessly and the electrical output is wireless, as well. Hence, there is practically no wear on the device. This sensor is suited for cyclical as well as continuous testing of tools. As the sensor is designed to be torsionally rigid any errors due to it are minimized. No service needed because of contactless data aquisition High interference immunity due to amplified active signal High accuracy due to frequency modulation and strain gage technology Power supply Optional angle detection torque ranges from 1 Nm up to 10.000 Nm torque with square drive with or without angle (w) function Variant bracket for quick assembly

System 3000 reliably protects stone crushers, waste compactors, mills and other processing plant which could be damaged by larger metal parts. The MDV/MU analysis devices of system 3000 feature, dependent on the variant,m a comfortable installation and set-up using automatic calibration, self-monitoring, reset function, pre-attenuation indication, sensitivity potentiometer and test function. Optionally, devices with multiple functions are available in the miniature control cabinet as well as robust water-tight variants for outdoor use. To increase sensitivity or range, it is also possible to connect several coils to an analysis device.

Discover the easy handling and flexible usage of our Hydraulic testers of the PPC series. Learn more about these testing devices on our special microsite. Pls. click here The PPC Pad is the highest-performance unit of the PPC series. This portable multi-function hand-held measuring instrument has been especially developed for the increasing fluid technology requirements. STAUFF‘s CAN bus sensors take advantage of the bus system‘s automatic sensor recognition to provide an easy-to-install Plug &amp; Play solution. The measured values can be displayed in various presentation styles and make effective solutions-orientated analysis possible. ▪ Portable multi-function hand-held measuring instrument ▪ Pressure, temperature, flow and speed can be measured, monitored and analysed ▪ Measurement and display of over 50 channels ▪ Measured value display: numerical, bar graph, pointer, curve graph ▪ Project templates can be saved and loaded ▪ Interfaces: CAN, LAN, USB ▪ Total memory with up to 1..

Discover the easy handling and flexible usage of our Hydraulic testers of the PPC series. Learn more about these testing devices on our special microsite. Pls. click here The PPC-04-plus and PPC-04-plus-CAN Hydraulic Testers have been developed for the growing demands in mobile and industrial hydraulic systems. They are perfectly suited for the precise determination of pressure, temperature, volume flow and rotational speed. PPC-04-plus ▪ Analogue version ▪ Max. two analogue sensors can be connected at the same time PPC-04-plus-CAN ▪ CAN version ▪ With CAN interface, max three digital sensors can be connected at the same time ▪ Max. CAN bus length: 50 m / 164 ft ▪ Multi-line, backlit LCD display ▪ Integrated data memory for 15000 data records ▪ External storage by using a USB memory stick ▪ Calibration certificate on request (only available for the analogue version) ▪ CE certified Materials ▪ Housing made of ABS in a rubber protective Dimensions and Weight ▪ WxDxH: 96 x 172 x 54...

The term inline filter refers to an expandable, bolted, modular system. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 10,000–300,000 m³/h. RS / RX filter The RS / RX series are a proven, expandable, modular system with low-pressure purge-air cleaning. Depending on requirements, appropriate filter and air injection sections are connected together in series. The capacity range extends from approx. 20,000–300,000 m³/h. RS / RX filters are suitable only for vacuum and positive pressure operation. The housing parts are usually made of 2 mm thick galvanised sheet steel. A thicker material in a painted execution as well as in stainless steel is also optionally available. The RS / RX series is 2.85 m wide. Filter hose lengths of 3 m (standard) and 4 m are available for this. The RSEC series has been designed for smaller air quantities and for above-roof installation. This series has a housing width of 2.4 m and 2 m-long filter hoses. The filter hoses are manufactured from polyester needle felt; the filtering direction is from the outside inwards. Filter cartridges and filter tubes are alternatively possible. The filter hoses are cleaned off using the material-preserving low-pressure purge-air system. The purging trolley inside the clean air compartment drives over the hose openings either continuously or controlled by pressure. In the direction of movement the first filter hose row is neutralised, while the second row is flushed from the clean air side. The third row is likewise neutralised. This results in a draught delay, which is necessary in order to allow the dislodged dust to fall into the discharge. The dust is discharged by a tried-and-tested drag conveyor with a downstream cellular wheel sluice. The return air pipes are provided with fire protection flaps and switching devices for exhaust air operation. The filter housing has been tested for resistance to pressure surges. Standard safety devices include likewise tested explosion pressure relief devices, fire extinguishing systems, mechanical and thermal monitoring systems as well as pressure-surge-resistant and flameproof cellular wheel sluices. The transport fan is arranged on the clean air side and is not exposed to swarf and dust. Hence, the conditions of a dust explosion zone do not prevail in the transport fan. RSV/RXV filter This series essentially differs from the RS/RX series in that its fans are arranged on the clean air side. RSV/RXV filters are suitable only for vacuum pressure operation. The capacity range extends from approx. 20,000 - 300,000 m³/h. The filter hoses are likewise cleaned off using the material-preserving low-pressure purge-air system.

proxOS is the central database and interface to devices and management systems. Training can thus be planned and managed efficiently. Central management It is good when one party has the overview. proxOS sits as the central interface and database between all devices and systems and manages the digital data flows. It is thus possible to access important information immediately, to relate test data of different devices to each other and thus provide doctors and therapists a holistic impression of the patient. External systems proxOS works just as smoothly together with the proxomed devices as with external patient management systems, such as Theorg (THEDEX interface) or hospital information systems (HL7 interface). proxOS connect functional modules The proxOS connect functional modules are the link between the central management and the various system components. In the process, all test and training results are saved centrally but are then made available for further processing in...

Integrating sphere source with spherical illuminated field for the uniformity and white balance of fisheye cameras. Features: Test device positioning in sphere center. Halogen lamps with filter wheel selected correction filters. RGB monitor detector. Remote control electronics.

Probe Buddy™ is a smart testing device that checks the integrity and health of an oxygen probe from United Process Controls and from other manufacturers. It’s also used to imitate the output signals of a working probe to check the scaling and operation of the process control system. FEATURES &amp; BENEFITS • Troubleshoot problems with your probe and control system • Assess the probe’s usability and performance • Verify controller’s input performance • Eliminate unneeded replacement of non-defective probes • Hand-held device operates as a probe test meter and a probe signal simulator • Enables non-expert to perform probe troubleshooting procedures like an expert • Accepts selectable TC and mV inputs from any oxygen probe • Outputs selectable TC and mV signals to simulate an oxygen probePerforms a probe impedance test when connected to a probe • Computes carbon, dewpoint or oxygen in input or output mode • Specific probe connection cables available, no hard wiring required