Results for
IGUS® GMBH
Germany
Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Other information Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0 Lightning fast opening and closing with Zipper E-Chain® und E-Tubes - Zipper E-Chain® satisfy by their practicability and performance. The "zip fastening" function shortens the installation time. The small pitch, the rugged elastic zipper band and the heavy duty links amaze in high accelerations. The Zipper series is one of the most popular igus® E-Chain® series in the sophisticated industrial sectors. Series 047 Inner height hi: 9 mm Inner widths Bi: 10 - 16 mm bending radii R: 18 - 38 mm Pitch: 13 mm E-Chain®, rip-open along the outer radius Series 07 Inner height hi: 10,3 mm Inner widths Bi: 6 - 64 mm bending radii R: 18 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 28 - 48 mm Pitch: 20 mm E-Chain®, rip-open along the outer radius Series 15 Inner height hi: 17 mm Inner widths Bi: 15 - 100 mm bending radii R: 38 - 180 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series 17 Inner height hi: 32 mm Inner widths Bi: 15 - 100 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Chain®, rip-open along the outer radius Series R07 Inner height hi: 10,3 mm Inner widths Bi: 10 - 50 mm bending radii R: 38 - 48 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R09 Inner height hi: 15 mm Inner widths Bi: 10 - 50 mm bending radii R: 48 - 100 mm Pitch: 20 mm E-Tube, rip-open along the outer radius Series R15 Inner height hi: 17 mm Inner widths Bi: 25 - 80 mm bending radii R: 63 - 180 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius Series R17 Inner height hi: 32 mm Inner widths Bi: 15 - 63 mm bending radii R: 63 - 125 mm Pitch: 30,5 mm E-Tube, rip-open along the outer radius E-Chain® selection aids You can find the right E-Chain® quickly by entering concrete parameters and with the aid of a comparison table. Selection aids Installation instructions Joining and separating of the Zipper E-Chain®. Assembly Instructions Application examples Applications in various industrial sectors and in the igus® test laboratory. Zipper Zipper E-Chain® Short installation time: Lightning fast opening and closing of lids with zipper Zipper lid can be separated and joined in any chain link Small pitch for low-noise, silent operation High accelerations: 100 m/s² and more Interior separation possible Zipper E-Tube resistant against chips and dirt Closed E-Tube with zip-open system Protection against dirt and chips Lightning fast opening of the lid in a band Modular design - simple lengthening and shortening Small division for low-noise, silent operation, high accelerations Typical industrial sectors and applications Automatic insertion machines Semiconductor devices Linear motors, handling systems Any kind of technical equipment Measuring instruments Machine tools (Zipper E-tube) Clean room Class 1 (ISO class 3) for Series 15, tested by the Dryden Engineering Company, California. iF-Design-Award for Zipper-Design UL94-V0 classification on request 58 dB(A) determined at the igus® laboratory, v = 1.0 m/s unsupported, Series 09.50.028.0
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
By providing not only a wide range of aluminum containers and aluminum lids but also packaging machines and technical support, OHLER Packaging Systems is able to offer a complete service to its customers. With more than 40 years of experience, OHLER plays a leading role as a food-industry partner for restaurants, caterers, kitchens, groceries and wholesalers, as well as airline food packaging.
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
Technical information The dismantling machine AB 01 universal is an electropneumatic driven machine. Exact dismantling of different insulated wires up to an outside diameter of 11.9 mm (0.47 in.) is possible. Settings are very easy to adjust
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
Technical information The electric cutting machine impresses with its compact build, quick processing times and flexible applications. Special features: Easy operation due to its 5“ display Simple insertion of wires Horizontal working level for improved insight into the operating area Guided conduction of cut wires Possibility to generate complete projects on the machine Optional extension for multiple infeed with the Z+F EVOFEED Full integration into the WPC is possible Multiple infeed Z+F EVOFEED By providing up to 12 conductors it is possible to sequentially process complex projects in a simple and effective way. The automatic feeding process makes manual interference obsolete and allows the processing of different cross-sections or colors according to the respective planning. This is very time-saving for the overall process, as individual jobs and projects can be processed autonomously.
Request for a quoteZOLLER & FRÖHLICH GMBH
Germany
For Z+F ferrules and integration in fully automatic machines Technical information The electropneumatic driven, easily adaptable crimp modules CM-AEH are specifically designed for Z+F ferrules. They can be integrated in fully automatic machines. Wires and ferrules can be crimped in the range of 0.34 up to 4 mm2 (AWG 22 – 12). Atrapezoidal crimp (CM AEH-G) or quadro crimp (CM AEH-LS) corresponding to DIN46228 part 4 are available. The machines can universally be used in the specified range. An I/O interface enables easy integration and time optimized function in fully automatic machines. CM AEH-LS For loose insulated Z+F ferrules: 0.34 – 4 mm2 (AWG 22 – 12)/Crimping length 6 – 12 mm
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
LLOYD DYNAMOWERKE GMBH
Germany
It is increasingly important to make provisions and to keep one’s own machines in good condition. This reduces downtimes and prevents a decline in production. Our seamless diagnostics helps to ensure that machines run fault-free and enables advance planning of maintenance or repair work. The experts from LDW bring their equipment to the customer to inspect the machine on site. From partial discharge measurement through to vibration measurement – we clearly identify what technical state a machine is in. This allows downtimes to be planned ahead and ensures the efficient repair of the respective component.Diagnostics at our works in Bremen is even more effective, because we can directly consult an expert from the mechanical construction, electrical calculation or the R&D department for an assessment if necessary. The customers are provided with a comprehensive protocol after the measurements have been carried out. We then recommend the next steps for a repair or continued operation.
Request for a quoteWHITE STEEL GMBH
Germany
DESCRIPTION High stability on high capacity. Can handle multiple ointment viscosity and types Type of metal used S.S 316 / 304 Certifications ISO 90012015, OHSAS 180012007, ISO 500012011, ISO 450012018 SPECIFICATION Bags Forming Section – Rollers carried the bags roll driven by servo motor. – Sealed process done by a special mechanism according to the required dimensions controlled by sensors. Filling and sealing Section – Multihead weigher provides regular continuous flow during the filling process equipped with electronic scales connected to the control panel to achieve the required packing quantity. – Pouch Seal mechanism by thermal heaters and a knife, welldesigned, long life. – Conveyor to transfer bags out of the machine. Technical specifications – The pouch dimensions can be adjusted by sensors and a printed sign on the roll. – Its form and fills various types of bags.
Request for a quoteGRONEMEYER MASCHINENFABRIK GMBH & CO.
Germany
The Gronemeyer overhead conveyor is used for discharging or transferring products. Distribution occurs in cycle operation and across the direction of transport. Depending on the use case, it is attached to existing machines to save space, or is set up in a free-standing housing. Even large distances can be overcome with the machine. Technical data: —Distribution: 2 lanes —Distribution process in cycle operation —Lane distance: up to 3000 mm —Complete machine cover made of Makrolon with maintenance doors Optional equipment: —Independent electrical control system with congestion monitoring —Loading and unloading belts
Request for a quoteZINNER GMBH PRÄZISIONSWERKZEUGE
Germany
Technical information When machining bar material particular care should be taken that as little material as possible is removed as cutting forces should be minimised and costs reduced. Therefore the exchangeable disc should be selected as a function of the work-piece which is to be parted. Tool systems Das RC-System und S-System sollte als erste Wahl bei den Abstechbearbeitungen verwendet werden. Die Schneidplatten wurden so gestaltet, damit der Span schmäler als die abzustechende Nut ist und ein optimaler Spanablauf gewährleistet werden kann. Das Z-CUT-DUO System ist bedingt durch die Doppelschneidplatte auf eine bestimmte Stechtiefe begrenzt.
Request for a quoteZINNER GMBH PRÄZISIONSWERKZEUGE
Germany
Technical information Axial grooving is among the most technically difficult machining process in the whole field of metal removal. In this process the chip, once removed, must overcome not just the shaping of the material but also the circular movement. It is particularly important that the machining should always commence at the outer diameter of the axial groove as tool stability is in direct proportion to the diameter. It is preferable for the tool to be used underneath the work-piece so that the chips can fall downwards without obstruction. Tool systems The S System is a modular tool system which offers innumerable possibilities to the user. The cutting tips for this system are ground to a sharp edge and produce an excellent surface quality. It goes without saying that the cutting tips can be supplied with all required corner radii. The RC System is screw clamped; the cutting tip is securely clamped into position so that it cannot fall out. When rough turning, grooving depths of up to 100 mm are standard. When turning larger diameters we are also able to achieve grooving depths of 150 mm.
Request for a quoteFRIEDENSTAB KUNSTSTOFFTECHNIK GMBH
Germany
With a modern machine park, we are able to produce injection molded parts up to approx. 400 grams. The materials used for this are e.g. PS, ABS, PP and PE, but also technical plastics. With a modern machine park, we are able to produce injection molded parts up to approx. 400 grams. The materials used for this are e.g. PS, ABS, PP and PE, but also technical plastics such as PA6, POM or IXEF are often used. Brief overview ARBURG injection molding machines Component weight: approx. 2 - 400 grams Closing forces: 50 - 220 tons Hybrid components (insert / outsert technology) Removal robots / vacuum gripping systems Automation around the injection molding process Central material handling system Material preparation Material drying
Request for a quoteResults for
Technic machines - Import exportNumber of results
12 ProductsCountries
Company type