System floorings - Import export

Raised access floor power system 9908AK with height-adjustable floor socket, 8 slots. The housing is made of sendzimir galvanized steel sheet, the frame and the lid for inserting from solid aluminum. The lid is anodized in natural aluminum and can be covered with carpet, etc. It closes even when the standard plug is inserted. The bottom of box can be opened for subsequent pulling of cables without affecting the connected units. Further assembly variants on request.

Underfloor system 8912BK with height-adjustable floor socket, with 12 slots. The housing is made of sendzimir galvanized sheet steel, the swiveling cover and the frame are made of 1.5 mm thick stainless steel. Floor coverings such as carpets, parquet, laminate etc. with a thickness of 15 mm can be inserted in the removable cover. The cover also closes when standard plugs are inserted. The bottom of the box can be opened for subsequent pulling of cables without affecting the connected units. Further configuration variants on request.

Today’s advanced interiors must be at the forefront of technology and design. They must offer style without compromising reliability. Above all, these spaces must support teams at their busiest, inspiring total focus and complete confidence. Today’s safest, most enduring buildings begin with noraplan® ultra grip rubber flooring. Smooth, wet surfaces cause 90 percent of workplace slip accidents. This innovative flooring solution, infused with the strength of granite, delivers incredible slip resistance in a range of distinct shades. The result is aesthetic design and unparalleled safety. Reliability is just the start of your journey forward. Take the next step with noraplan® ultra grip. Key Features: Good for heavy usage High footfall sound absorption (6-8 dB) R11- slip resistance Free of PVC Increased safety thanks to high fire-retardant properties jointless installation No coatings needed Rubber safety floor covering for increased slip resistance.

Individual requirements for stairwells are best fulfilled from our extensive system programme, from the tailored norament® stairtread with integrated preformed stair nosing, riser, and tread to individual combinations of stair angles, stair nosings, and integrated safety stripes. Our system range is rounded off with colour-matched skirting solutions, joint-sealing compounds, hot welding rods, and installation materials.

Individual requirements for stairwells are best fulfilled from our extensive system programme, from the tailored norament® stairtread with integrated preformed stair nosing, riser, and tread to individual combinations of stair angles, stair nosings, and integrated safety stripes. Our system range is rounded off with colour-matched skirting solutions, joint-sealing compounds, hot welding rods, and installation materials.

Individual requirements for stairwells are best fulfilled from our extensive system programme, from the tailored norament® stairtread with integrated preformed stair nosing, riser, and tread to individual combinations of stair angles, stair nosings, and integrated safety stripes. Our system range is rounded off with colour-matched skirting solutions, joint-sealing compounds, hot welding rods, and installation materials.

Raised access floor power system 8512BK with 12 slots. The housing is made of sendzimir galvanized sheet steel. The insert lid and frame are made of 1.5 mm thick stainless steel. The lid is removable and can be covered with a 15 mm floor covering such as Stone, wood etc. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further equipment variants on request.

Raised access floor power system 9904AK with height-adjustable floor socket and 4 slots. The housing is made of sendzimir galvanized sheet steel, the frame and the insert lid are made of solid aluminum. The lid is anodized in natural aluminum and can be fitted with floor coverings. It closes even when the standard plug is inserted. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further configuration variants on request.

Raised access floor power system 8508BK with 8 slots. The housing is made of sendzimir galvanized sheet steel. The insert lid and frame are made of 1.5 mm thick stainless steel. The lid is removable and can be covered with a 15 mm floor covering such as Stone, wood etc. The bottom of the receptacle box can be opened for subsequent pulling of cables without affecting the connected units. Further equipment variants on request

The weigh price labeller WPL-S for product quality and food safety — One machine does all (average weight, catch weight, ERP/traceability, recipe etc.) — Highly configurable hygienic design in full stainless steel construction that allows thorough cleaning without any food traps. Made for all areas. — Equipped with BarTender® label design, ProRecipe XT®, production system, additional printers or floor scales that will offer you the comprehensive solution you were expecting. — Its modular design allows quick exchange ofcomponents minimising downtime. Currently available in France, Germany, Poland and the UK.

SYSTEM SOLUTIONS FOR SILAGE SILOS The Lipp dual seam system was and still is the basis for Lipp’s sustained success over the last few decades. Silage silos were already being built for agriculture with this system in the 1960s. The Lipp dual seam system is still employed today for the construction of silos and system solutions used for the storage of silage. In addition to pure container construction, system solutions for silage silos also include other components that go far beyond the scope of supply of a simple container manufacturer. APPLICATION EXAMPLES & REFERENCES Lipp system solutions for silage are used for storage and preservation of silage in an above ground, cylindrical container. Corresponding filling and extraction systems, roof and floor structures round off the scope of supply. A large number of the silage silos installed decades ago are still in operation today and provide proof of the high quality standard and extremely long service life.

The semicontinuous TFi3000 for industrial use is not a compromise, but rather the combination of the benefits of two entirely different systems! It permits smoke, heat and cold treatments in a single production step. Automated work processes lower your operating costs while at the same time increasing production capacities. Efficient combination of Ti3000 & IKi3000 Production justintime, controllable and reproducible work processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

Klöpper Therm electric flow boilers are used for generating hot water in heating units for direct heating, storage operation or for Power to Heat systems. As an alternative to other energy types in new buildings or when converting central heating units, these boilers offer a universal range of applications radiator heating, floor heating, mixed systems or bivalent operation with other energy types. Depending on the relevant operating conditions of the energy supplier, the boilers are used for direct or storage heating by utilising free electric power during off peak times.

The TF3000 combines the Turbomat T3000 and the intensive cooling system IK3000 in a single closed system. This means one thing most of all Best output per chamber part for the shortest process times. The automated transport system not only reduces operating costs, but also increases production capacities in the system. Maximum output per chamber part Production justintime, controllable and reproducible processes Much lower germ formation and contamination – for longer durability Automatic transport system Producing, packaging and delivery in a very short time Lesser demand of cold storage capacities Higher trolley capacity as comparable floor conveyor systems by low construction

In many plastic systems, such as elastic PVC floor coverings, a wide variety of Incorporated inorganic fillers. However, these inorganic additives do not show any significant tendency to be incorporated into the liquid constituents of a plastisol. Without suitable additives, this is practically impossible. Provides for an optimal distribution of the filler NEWOS for the process step of dispersing innovative and market-proven process aids under the name NEWOTEC.

Self-leveling industrial floor of strength class C50-F10-A9 in accordance with EN 13813. Hardens fast and with low tension with a layer thickness of 2 – 50 mm. Maleki-IFS 400 is the perfect solution for areas with the highest demands on resilience and environmental protection. Choose for quality, sustainability and performance with Maleki-IFS 400. The product has been awarded the EMICODE EC 1PLUS label for very low-emission building materials. Packaging unit: 25 kg paper bag, 1050 kg per pallet – Article-No.: 1410

excellent foot fall attenuation high walking comfort highly suitable for double floor systems diverse options for surface treatment and coatings

Four-sided, metal fire protection duct to install and route cables. With intumescent inner lining. In the event of fire, it prevents the spread of fire in the duct and protects emergency and escape routes against the impacts of a cable fire. Direct wall and ceiling mounting, mounting possible beneath system floors or on support systems. Tested and approved as an I duct according to DIN 4102 Part 11. General construction approval for fire resistance classes I30 to I120. Pre-terminated fittings available. Only pre-terminated fittings that match the description in the approval may be installed with the fire protection duct. Safe connection of duct base and removable duct cover through integrated locking brackets. Toolless mounting. Multiple mounting and dismantling of the cover possible. Equipotential bonding created using locking brackets.

Four-sided, metal fire protection duct to install and route cables. With intumescent inner lining. In the event of fire, it prevents the spread of fire in the duct and protects emergency and escape routes against the impacts of a cable fire. Direct wall and ceiling mounting, mounting possible beneath system floors or on support systems. Tested and approved as an I duct according to DIN 4102 Part 11. General construction approval for fire resistance classes I30 to I120. Pre-terminated fittings available. Only pre-terminated fittings that match the description in the approval may be installed with the fire protection duct. Safe connection of duct base and removable duct cover through integrated locking brackets. Toolless mounting. Multiple mounting and dismantling of the cover possible. Equipotential bonding created using locking brackets.

Heating technology with a future The calculation is simple, the technology successful. Efficient surface drying is achieved with biomass in Rippert plants. Together with the Hargassner company from Austria, a specialist for heating with biomass, and the proven Rippert plant know-how, the technology is now marketable and has gone into production. The demanding drying characteristics in a powder-coating plant are compatible with the process and work perfectly. A future-orientated heating technology with considerable economic and ecological benefits – the experts are unanimous in that. Wood pellets or wood chips are the inexpensive energy suppliers. They are valuable waste products that result from the processing of domestic timbers. Heating with wood chips – without intermediate heat transfer media such as thermal oil • Environmentally friendly and CO2-neutral • fully automatic boiler cleaning and ash discharge Maximum financial saving potentials are realised with this energy carrier. Wood chips, chopped to a transportable size and dried by the supplier, are stored in the storeroom near the plant. It can be located on the same level or lower. A tried-and tested transport system consisting of a floor agitator with springs and discharge auger carries the wood chips reliably into the plant. Here it acts as a fuel with maximum convenience. If the calorific value equivalents are examined, we see that 1,000 litres of fuel oil is equivalent to 12 m³ of wood chips. The ratio is the same for 1,000 m³ of natural gas. Heating with wood pellets - without intermediate heat transfer media such as thermal oil Wood pellets are true energy bundles. They consist of natural wood and are made by compressing sawdust, which is produced in large quantities every day in the industry. As a biomass they are the alternative to wood chips and are just as advantageous from an economical point of view. Pellets have the smallest volume and are conveyed dust-free and without odours from storage containers to a storage vessel next to the plant. They are transported into the combustion chamber via a rotary vane feeder and feed auger. For comparison: 1,000 l fuel oil = 2 t pellets 1,000 m³ natural gas = 2 t pellets 1,000 l liquefied gas = 1.32 t pellets Advantages • Reduction in energy costs Heating cost comparison (reference = 1,000 l fuel oil)

Cassette, 9, with cord outlet, V2A, floor covering 25 mm, as connection unit according to EN 50085-2-2, for installation in mounting opening in screed-covered duct system and raised and cavity floors indoors, for use in dry rooms with dry-cleaned floors, height adjustable to top floor edge, consisting of: — Cassette with slip-proof cord outlet with handle and inserted sheet steel cover, — cassette frame with integrated snap-in ladder for installation of 3 universal supports for 9 single installation devices with support bracket or 12 Modul 45 devices and cable guide bracket with integrated scuff protection, — 4 levelable supports. Classification according to EN 50085-2-2: — Application area: for dry floor care (6.101.1). — IP protection class: IP 30. — IK protection class: IK 10. Material: — Cassette made of stainless steel sheet, 1.5 mm. — Cord outlet made of stainless steel sheet. — Cassette frame made of stainless steel sheet, 2 mm.

Heavy duty cassette R7 for tube, V2A, 20 kN, floor covering thickness 25mm, as access unit according to EN 50085-2-2, for installation in round mounting opening in screed-covered trunking system and raised and cavity floors indoors, suitable for static loads up to 20 kN, for use in dry rooms with wet-cleaned floors according to DIN VDE 0634, height adjustable to top floor edge, consisting of: — Cassette with seal and inserted sheet steel cover, — cassette frame with integrated snap-in ladder for installation of 3 universal supports UT3 for 9 single installation devices with support ring/bracket or 12 Modul 45 devices, — 4 levelable supports. Classification according to EN 50085-2-2: — Application area: for wet floor care (6.101.3) in used condition. — IK protection class: IK 10. — Load capacity: 2-20 kN Material: — Cassette frame, cassette made of V2A sheet metal, 2 mm. — Insert cover: galvanized sheet steel, 8 mm.

Cassette R9, with cord outlet, V2A, floor covering 25 mm, as connection unit according to EN 50085-2-2, for installation in mounting opening in underfloor installation systems and raised and cavity floors indoors, for use in dry rooms with dry-cleaned floors, height adjustable to top floor edge, consisting of: Cassette with slip-proof cord outlet with handle and inserted sheet steel cover, cassette with seal, cassette frame with integrated snap-in ladder for installation of 3 universal supports for 9 single installation devices with support bracket or 12 Modul 45 devices and cable guide bracket with integrated scuff protection, 4 levelable supports. Classification according to EN 50085-2-2: Application area: for dry floor care (6.101.1). IP protection class: IP 30. IK protection class: IK 10. Load capacity: 3,000 N (6.102.7) 5.000 N (6.103.3)

Heavy duty cassette 9 "for tube", V2A, 10 kN, floor covering thickness 21 mm, for installation in square mounting opening in screed-covered trunking system and raised and cavity floors indoors, suitable for static loads up to 10 kN, for use in dry rooms with wet-cleaned floors according to DIN VDE 0634, height adjustable to top floor edge, consisting of: — Cassette with installation opening for tube, with seal and inserted sheet steel cover, — cassette frame with integrated snap-in ladder for installation of 3 universal supports UT4 for 9 single installation devices with support bracket or 12 Modul 45 devices, — 4 levelable supports. Material: Cassette frame, cassette made of V2A sheet metal, 2 mm. Insert cover: galvanized steel sheet, 8 mm. Depth of the recess in the cassette for the floor covering in mm: 21. Required mounting opening in mm: 244x244 mm. Required minimum installation depth: 132 mm. Leveling range: +18 mm.

The specified indivdual work steps, coupled with the best technical equipment, give the customer the assurance for a high quality product made in Germany. Through its unique selling pro position in term of the accoustic sound and fire protection properties, the system stands out clearly from the rest of the market and offers unpreceden ted opportunities. Modular system for substantially shorter installation times. Unique sheetpanelled acces floor system for intensive installation areas for example stages, lecture halls or congress centers. Prefabricated vents in the plasterboard covering for the integration of heating and cooling systems has the advantage of shorter installation times on site, as well as reduced overall assembly height. A uniform air distribution is ensured by source air outlets or perforated louvres. Drilling and milling for the subsequent assembly of chairs, lighting and ventilation outlets are already prefabricated.

False floors We supply different false floors for classic applications which utilise a modular unit with an integrated false floor for cables. System false floors from Betonbau are used in local substations, transfer and transformer stations and switchgear houses. These floors are particularly flexible, can be adapted to precisely suit your room and switch cabinet layout and conform to DIN VDE 0101. We can fit your floor with buoyancy protection where necessary to minimise in as far as possible the effects of an internal malfunction on operators. Key locking is realised in the false floor profile, and the keys can only be withdrawn in the locked position. The design has been tested for accidental arcing in compliance with DIN EN 62271-202. The Betonbau system consists of extruded aluminium profiles and/or galvanised steel profiles and galvanised steel supports with height adjustment designed to suit the switchgear to be integrated. The accessible surface is covered with...

Viavent® is a closed over-the-floor cycle system for the automatic pumping off of chips and coolants.