Synthetic - Import export

The synthesis dust filter bag has been a very high quality option for commercial cleaning for more than 10 years. The non-woven material is very robust, so that e.g. stones, light moisture and fine dust can be absorbed. In addition, dust retention values, separation efficiencies and durability have been improved. For these reasons, the Synthese dust filter bag is also increasingly used for light cleaning jobs. Synthese 3, 4 or 5 ply, filter bags with dirt flap, sliding closure or plastic connection, Synthese dust filter bags also in set with motor protection filter, household filter bags

Lubrication of chains, joints, clamping and drying frames or slideways at temperatures up to 280°C For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Reduction of the friction coefficients and increase in the wear protection through additives suitable for high temperatures Long period of use through high oxidation stability Clean chains without deposits (no cracking residues) Extended relubrication intervals through low evaporation losses

Turpentine substitute is a solvent for diluting oil and synthetic resin-based paints. Other sizes available on request

Lubrication of chains, hinges, joints, clamping and drying frames, and slideways at higher temperatures For conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Non-contaminating liquid lubricant for higher temperatures Highly effective due to optimum wear protection, outstanding oxidation behaviour and good creep properties Absolutely resistant to water and steam, inert with respect to acidic media Outstanding adhesion and lubrication effect with no tendency to drip and no formation of hard residues For best results clean the cold surface, first mechanically and then with OKS 2610/OKS 2611 Universal Cleaner. Apply sufficient amount onto the lubrication areas with brush, dip oiler, dipping or suitable automatic lubrication systems. Let excess drip off and let product affect before the beginning of operation. Instructions of the machine manufacturer have to be considered. Relubrication period and amount should be stated

Lubrication of rolling and friction bearings subjected to high temperatures, corrosive environmental influences Lubrication of bearing points at furnace, cooling-bed and conveyor systems, motors and hot-air fans that are subjected to temperature stress Suitable for lubricating exhaust-gas fans Advantages and benefits Reduces wear and friction Good corrosion protection Excellent temperature resistance When operating temperature is exceeded, forms only minimal residues Good plastic and elastomer compatibility Good resistance against water influence and aggressive environmental influences For optimum effect, carefully clean the lubricating point, for example with OKS 2610/OKS 2611 universal cleaner. Before filling for first time, remove anti-corrosion agent. Fill the bearing such that all functional surfaces are certain of being greased. Fill normal bearings up to about 1/3 of the free space inside the bearing. Low-speed bearings (DN value < 50,000)

Blickle’s synthetic castors have a modern and clear design and feature high-quality surfaces. They are used in a wide range of applications, including medical equipment, transport systems, kitchen equipment and designer furniture. The smooth surfaces of synthetic castors make them easy to clean, allowing them to meet demanding cleanliness and hygiene requirements. .

INOX high-performance diesel particle filter cleaner is the most economical way of maintaining and cleaning particle filters! It can be used in all diesel engines and can be mixed with all diesel fuels whereby the filter is cleaned while the vehicle is in motion. The filter cleaning takes place without any additional installation or removal practices, without downtimes and without malfunctions.

INOX Common Rail Diesel System Cleaner & Protection is specially designed for all high pressure diesel systems and direct injection devices, such as common-rail, pump-nozzle, etc. It is developed and tailored to the specific requirements of the latest generation of high-tech products. It reliably and sustainably removes dirt from the entire system and ensures optimal atomization and the optimal efficiency of the diesel fuel.

The INOX® disinfectant cleaner IX thoroughly cleans and disinfects all surfaces made of ceramic, plastic, glass and metal. It is a universal and powerful cleaner for the household, gastronomy, large kitchens and sanitary facilities. The INOX® disinfectant cleaner IX contains the active ingredient sodium hypochlorite with a concentration of 0.25%, which means it has a germicidal and odor neutralizing effect.

INOX SAE 10 W INOX SAE 20 W INOX SAE 30 W INOX SAE 40 W INOX SAE 50 W INOX SAE 20 W 20

In the field of highly efficient filter materials, we have developed proprietary synthetic filter media produced with various fiber diameters and available in different grammages. With a particle separation of up to 99,99%, our media also feature a low pressure drop together with high softness. Due to endless fibers no fiber shedding occurs. We support our customers with filter media material as roll goods for respirator masks or pleatable material.

Grease lubrication of plain and rolling bearings in high-temperature range, where a mineral oil based grease cannot be used, e.g. on hot-air blowers and fans, autoclaves, drying ovens or systems in steelworks and foundries Advantages and benefits Drip-free hot bearing grease for a broad temperature range with high oxidations stability and moisture resistance Excellently suited for long-term lubrication of grease lubricating points subject to high-temperature loading Highly effective due to optimum high-performance formula Broad range of uses outside normal grease performance areas

Fully synthetic oil for use at permanently low temperatures in all areas of the food processing industry, for example in cold storage houses, shock freezers, etc. Chain lubrication at arctic temperatures Advantages and benefits NSF H1 registered MOSH-/MOAH-free Excellent low-temperature behaviour Good ageing and oxidation stability through optimal additives Cold and hot water resistant Resistant to water steam, as well as disinfectants and cleaning agents Long economic operating times Also available as spray version OKS 3711

Lubrication of chains, hinges, joints, clamping and drying frames or slideways at higher temperatures Suitable for conveying systems in painting, stoving, drying and cooling bed installations Advantages and benefits Highly effective due to optimum wear protection and outstanding oxidation properties Resistant to water and steam Good creep properties Very good adhesion and lubrication effect with no tendency to drip

Lubrication of chains, fringe bearings, hinges, joints, clamping and drying frames or slideways at higher temperatures and loads For conveying systems under radiation heat in painting, stoving and drying systems Advantages and benefits Highly effective due to finest, homogeneous MoS₂ distribution in the oil Emergency running properties through MoS₂ at dry running Outstanding adhesion and lubrication effect with no tendency to drip or dry out Silicone-free For best adhesion, clean the surfaces. Best way is to clean mechanically first and then with OKS 2610 or OKS 2611 universal cleaner. With a brush, drip oiler or by immersion or using a suitable automatic lubrication system, apply a sufficient quantity to the locations to be lubricated. Allow excess to drip off. Allow OKS 350 to soak in before operating. Observe the machine manufacturer's instructions. Assess the lubrication frequency and quantity on basis of service conditions

Whether highly opaque dispersion paint or diffusion-open silicate paint, synthetic resin lacquers or epoxy resin primers, our experienced employees develop suitable solutions and are at your side with help and advice.

Back in 1978, Ralph Schöpp KG was the first manufacturer to produce a smooth velour surface for an indoor tennis court - since then, more than 2000 velour courts have been installed. The experience we have gained over this period enables us to offer you a truly perfect product today - SCHÖPP®-Classic. A yarn weight of 1000 g/sqm and a pile density of 244,000 pimples/sqm guarantee a surface quality that can no longer be surpassed in terms of sports functionality and durability. sporty, fast ball bounce in the comfort version, high rubber elasticity with good rating comfort life expectancy of approx. 15 years depending on the intensity of use elegant, cosy velour look

Lubrication of heavy loaded toothed gears and worm gears exposed to outdoor conditions and/or low temperatures, as well as tilted or vertical shafts, especially with gear designs which are not oil-tight Lubrication of friction bearings with minimal bearing clearance or high circumferential speeds Advantages and benefits Long-term lubrication due to excellent resistance to oxidation and ageing Wear reduction at maximum loading Prevents leakage with angled or vertical shafts due to good adhesion on metallic surfaces Flowing structure prevents grooving in gear units with continuous coverage of surfaces

For the long time- or for lifetime- lubrication of fast running roller and plain bearings as well as linear guides, threaded and ball screw spindles, small gears and similar components, exposed to high pressures and higher temperatures Advantages and benefits Good adhesive and good media resistant Good low-temperature behaviour, stress absorbing ability and smooth run at high speeds Good plastic compatibility The low start and running moment, especially at low temperatures, enables a high efficiency The good wear protection increases the life time of the part and makes sure a reliable functionFor best results clean the lubrication point with OKS 2610/OKS 2611 Universal Cleaner. Remove the corrosion protection media before initial filling. Fill the bearings in a way that all the functional surfaces are lubricated sufficiently. Slow moving bearings (DN-value < 50,000) should be filled completely. Fast running bearings (DN-value >400,000) should be filled

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system

Lubrication, cleaning and protection of bright metal surfaces, e.g. of precision machine tools, measuring equipment, mechanisms in precision mechanics and optics, of precision instruments Can be used at machine elements of all types, for example sliding parts or slideways, at threads, locks, hinges, joints, drives Versatile use over the full range of care, conservation and maintenance applications Advantages and benefits Highly effective due to good wetting, dissolving and protective ability Good creep properties Behaves neutrally with respect to plastics, elastomers and paints Good protection against corrosion-causing moisture and wetness Resin and acid-free OKS 700 is also suitable for use with the refillable Airspray system Also available as spray version OKS 701

Short description: Synthetic flat hose with Storz couplings Efficient layflat hose - german quality - with Storz suction couplings for water support. Professional binding with hose clamps.

The Soft-Touch range features a sandwich material combining synthetic leather and a plastic sheet. The surface is provided by a synthetic leather which is characterized by a variety of colours and textures. The underside comprises a sturdy polystyrene that bonds easily to derived timber products.

The Soft-Touch range features a sandwich material combining synthetic leather and a plastic sheet. The surface is provided by a synthetic leather which is characterized by a variety of colours and textures. The underside comprises a sturdy polystyrene that bonds easily to derived timber products.

The Soft-Touch range features a sandwich material combining synthetic leather and a plastic sheet. The surface is provided by a synthetic leather which is characterized by a variety of colours and textures. The underside comprises a sturdy polystyrene that bonds easily to derived timber products.

The Soft-Touch range features a sandwich material combining synthetic leather and a plastic sheet. The surface is provided by a synthetic leather which is characterized by a variety of colours and textures. The underside comprises a sturdy polystyrene that bonds easily to derived timber products.

The Soft-Touch range features a sandwich material combining synthetic leather and a plastic sheet. The surface is provided by a synthetic leather which is characterized by a variety of colours and textures. The underside comprises a sturdy polystyrene that bonds easily to derived timber products.

The Soft-Touch range features a sandwich material combining synthetic leather and a plastic sheet. The surface is provided by a synthetic leather which is characterized by a variety of colours and textures. The underside comprises a sturdy polystyrene that bonds easily to derived timber products.

The Soft-Touch range features a sandwich material combining synthetic leather and a plastic sheet. The surface is provided by a synthetic leather which is characterized by a variety of colours and textures. The underside comprises a sturdy polystyrene that bonds easily to derived timber products.