Suction hoses - Import export

For use in floating or fixed pipelines. To handle fine and coarse-grained materials with high vacuum loads. Applications: Wet dredging, sand and gravel excavation, suction dredging and gravel washing systems. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays Concealed steel spiral UV, ozone and weather-resistant, abrasion-resistant cover Interior smooth, exterior corrugated Sections cut to length with cuffed ends and/or widened hose endings or built-in flanges. Suction dredging hoses also available with enhanced vacuum performance for pure suction applications at customer request. Other versions and dimensions on request.

NORPLAST® PVC-CU 384 AS is an antistatic suction and transport hose. It’s heavy, has a smooth interior and a grounding wire. Electrical and surface resistance is approx. 10⁹ Ohm

The Master-PUR HX Trivolution is a highly abrasion resistant and vacuum proof PU suction hose and transport hose with reinforcement underneath the spiral. It’s antistatic, microbe-resistant and hardly inflammable according to DIN 4102 B1. Surface resistance is < 10⁹ Ohm.

The Master-PUR H Trivolution is a PU suction hose & transport hose, which is very flexible. It’s antistatic; microbe-resistant and hardly inflammable according to DIN 4102 B1.Surface resistance is < 10⁹ Ohm:

Short description: Rubber spiral hose, 5 m length Water hose for suction and delivery purposes in tough applications in industry, agriculture, and construction. The tube is suited for water, sewage, liquid manure, drilling mud and low abrasive materials. The cover is abrasion and weather resistant. With spiral free cuffs.

Short description: Rubber spiral hose Water hose for suction and discharge purposes in tough applications such as in industry, agriculture and construction. The tube is suited for water, sewage, liquid manure, drilling mud and low abrasive materials. The cover is abrasion and weather resistant.

Short description: Rubber industry hose 10 bar Extra heavy duty water hose for tough applications in industry, agriculture and construction sites. Kink resistant, easy handling and robust. Resistant to weather and abrasion.

Transportation of hard material in different grain sizes in wet and dry conditions. The hoses are characterized by abrasion resistance, flexibility and low bending radius. For mobile suction dredger vehicles from all major manufacturers. Individual adjustment of each type with different wall thicknesses and designs. Temperature resistant from -30 ° C to + 80 ° C. Construction: Highly abrasion-resistant tube Tension resistant fabric inlays Concealed steel spiral Abrasion-resistant, weather-resistant cover Interior smooth, exterior corrugated Optional: electrically conductive In different fixed lenghts with cuffed ends. Other versions and dimensions on request.

For road or pavement sweepers of all well-known manufacturers, espacially for suction of material like leaves and garbage. In fixed length with high service life, extraordinary flexibility and low weight. Individual voting on the specific vehicle parameters, taking into account the user requirements. Construction: Black, highly abrasion-resistant tube Tension and rot-proof fabric inlays Concealed steel spiral Abrasion-resistant, weather-resistant cover Interior smooth, exterior corrugated Cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

Storz couplings are available in all common sizes (A, B, C) in stainless steel or aluminium in the following versions: solid coupling with inner thread with outer thread cap fire hose coupling suction coupling

You will find: crevice nozzle in two lengths and pipe diameters Upholstery nozzle, with thread lifter in different pipe diameters Suction brush, with swivel joint in various pipe diameters Suction hose, complete with connections and hand tube Telescopic tube, various telescopic tubes in different tube diameters for vacuum cleaners of well-known manufacturers

For in-depth measurements in boreholes. Complete with water separator, suction hose, sintered filter and coupling. The measuring tip comes closer to the leak point or the gas mains and kann thus deliver better results.

Short description: Yarn dyed firefighting hose Robust DIN firefighting hose, very flexible, rotting resistance, colour-fast, flat rollable, maintenance free. Delivery occurs with suction hose couplings and wire binding.

For use as an expansion joint in suction and pressure lines. As a suction hose on suction dredgers with narrow bending radiuses. To handle fine and coarse-grained materials. Also suitable for tough transport applications of dry materials in the mining field. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays Concealed steel rings UV, ozone and weather-resistant, abrasion-resistant cover Interior smooth, exterior deep corrugated Cut to length with built-in flanges. Other versions and dimensions on request.

For marine applications we produce hoses and technical hose products in dimensions from 15 to 1600 mm, in variable lengths and for suction and pressure purposes from 1.0 bar vacuum to 150 bar WP. Temperature resistant from –40°C to +1200°C. We are in possession of testing certificates of various certification and classification companies for these products. APPLICATIONS Exhaust hoses Aramide hoses Fuelling hoses Bunker hoses Steam hoses Deck washing hoses Fender Fish suction hoses Flat hoses Flame-resistant hoses Flange hoses High-pressure hoses Cable protection hoses Expansion joints Fuel hoses Coolant hoses Product transport hoses Suction and pressure hoses INDUSTRIAL HOSE As connecting piece or coupling in pipelines. SPIRAL HOSE Movable connecting element in pipelines for suction and pressure purposes. CORRUGATED HOSE Highly flexible connecting element in pressure and vacuum applications in all peripheral feed and drain lines. EXPANSION JOINT Flexible compensator with...

ProfiSampler PP for general samples, for weak acids, alkalis, detergents, chemical baths. Made of solid, chemical resistant Polypopylene. ProfiSampler PP, consisting of: Vacuum pump, made of solid PP, with feet, venting valve and bottle thread GL 40, 1 PP bottle 250 ml, 10 m PE suction hose (roll), 1 hose cutter, 1 stainless steel hose weight made of AISI 304 (1.4301), 20 seal-it bottle seals. While the MiniSampler is designed for laboratory use, the ProfiSampler has been specially developed for rough industrial use.

The new Scout VGS 4500 measuring station consists of measuring probes mounted on the front of the vehicle and a measuring cell installed within the vehicle. These two parts are connected via a suction hose. The system can be mounted on different type of vehicles such as a pickup truck, quad or car. To adapt to nature of the surface to be measured, the probe distance can be adjusted quickly and it is just as easy to store the entire front probe. With the Scout VGS 4500 measuring station from Schütz, very large sections of network can be inspected and the results can be recorded in a short time. With the vehicle-based measuring system, measurements are accurately taken at speeds up to 50 km/h. Even under the most difficult conditions, Scout VGS 4500 has proven its reliability. The system was successfully subjected to a resistance test in the desert at an outside temperature of over 36 degrees Celsius.

Suction and Pressure hose for liquid media, also with solids content. Resistant to faeces and light alkaline solutions. Suitable for use on suction vehicles and fixed-location pumping stations. Temperature resistant from -40°C to +100°C. Construction: Faeces-resistant tube Optional: Oil and petrol-resistant tube Tension and pressure-resistant fabric inlays Concealed steel spiral Abrasion-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

Description - Suction and delivery hose for conveying a wide range of chemical aggressive products - Meets the standards EN 12115:2011 - Engineered to ensure the dissipation of electrostatic currents not only superficially, but also through the hose wall - For suction and discharge service Tube - UPE (Ultra High Molecular Weight Polyethylene), black, smooth, antistatic (R < 10^6 Ω) Reinforcement - Plies of high strength synthetic textile - Built-In copper wires are available upon request - with or without Embedded steel helix wire Cover - EPDM, black, smooth, antistatic (R < 10^6 Ω), resistant to abrasion, ozone, weather and high temperatures, cloth finish

Description - Suction and delivery hose for a wide range of chemicals with a medium or low concentration - Meets the standards EN 12115:2011 Tube - EPDM, black color antistatic (R < 10^6 Ω), smooth, resistant to abrasion, high temperatures, acids and alkali Reinforcement - Plies of high strength synthetic textile - with or without Embedded steel helix wire Cover - EPDM, black, antistatic (R < 10^6 Ω), smooth, cloth finish, resistant to abrasion, ozone, weather and high temperatures

Description - Suction and delivery hose for conveying solvents and chemicals with high concentration - The fluorinated inner liner ensures an excellent impermeability and utmost resistance to oxidation, to extreme temperatures and to mechanical stress, thus avoiding cracks - Hose in accordance with EC 1935/2004 and 2023/2006/EC (GMP) and EC 1907/2006 (REACH) - Meets the standards EN 12115:2011 Tube - MFA (Perfluoralkoxy Polymer), fully fluorinated, white, patented, mirror-smooth, no contamination of taste and smell - Compliance: UPS Class VI, FDA standards and D.M 21/03/73 Reinforcement - Plies of high strength synthetic textile - Embedded steel helix wire - Built-in copper wires Cover - EPDM, black, smooth, resistant to abrasion, ozone, weather and high temperatures, cloth finish - According EN 12115:2011, antistatic (R < 10^6 Ω)

Description - Suction and delivery hose for conveying hydrocarbons with an aromatic content up to 50% - Excellent for use on tank trucks, rail tanks and processing plants in the oil industry - Meets the standards EN 12115:2011 - Suitable for transferring gasoline, diesel, biodiesel blends including B100 and fuels based on ethanol Tube - NBR1, black, smooth, antistatic (R < 10^6 Ω), resistant to gasoline, oils, fats, hydrocarbon and gas Reinforcement - Plies of high strength synthetic textile - with or without Embedded steel helix wire - Built-in copper wires are available upon request Cover - NBR, black, smooth, antistatic (R < 10^6 Ω), resistant to abrasion, ozone, weather, gasoline, fatsand minerals oils, cloth finish

Mobile, compact, transportable by car. Without tank. Unit allows to suck coolant directly from tooling machines and disinfect in bypass mode. Includes 5 m suction hose, 5 m backflow hose, 25 µm filtration unit and de-airing system. Working volume 300 l / m

Mobile, compact, transportable by car. Without tank, medium supply via suction unit. No metering of cleaning agent. Stepless adjustable pressure. Filter unit with de-airing system. Start/stop via spray pistol. 5 m hose with quick change lance SR-LA 600, 5m suction hose. 10 KW, 16A.

Combination SRK AS + SRK AE Mobile, compact, transportable by car. Without tankWater supply either via suction unit or external water connection. Filter unit with de-airing system. Stepless adjustable pressure. spray volume : 1,8l/min. 10KW, 16A. Start/stop via spray pistol. 5 m hose with quick change lance SR-LA 600, 5m suction hose.

Thanks to the ergo vac suction electrode unit, you can carry out your ECG measurements quickly and comfortably. ergo vac can be adapted to all types of ECG equipment. This suction electrode unit can be installed on a variety of trolley systems. °°Handling is simple because cables are routed inside the unit °°Telescopic arm with adjustable height °°Mount for suction hoses °°Simple to operate – so you save time °°300° swivel range