Steel- special - Import export

Optigrun Drainage Gutters and Terrace Grids are used for draining surface water from roof outlets, draining water-bearing layers, draining driving rain from the facade, as collection channels for draining green roof areas and as branch canals between downpipes and roof outlets.

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.

Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.

Stainless steel square, other grades availabe on request, cold-drawn. Technical delivery conditions according DIN EN 10088-3:2014. Execution as per DIN EN 10278:1999, tolerance h11. The produced bars are delivered with mill test certificates according to DIN EN 10204/3.1. Available in random lengths of 3000-3200 mm. *The regular minimum order quantity is 500 kg. The finished bars are packed in bundles of approx.500 kg. Each bundle carries two labels, providing information about dimensions, grade, heat number, weight, manufacturer's code and works inspector. Other dimensions on request. Application areas: • Mechanical engineering • Chemical industry • Petrochemical industry • Food industry / agricultural technology • Transportation • Decorative guidelines / kitchen furnishings • Construction industry Special features: • Non-magnetic materials

Stainless steel types: Austenitic Duples Ferritic Martensitic Nickel alloys Titanium

Stainless steel, flat, grades availabe on request, hot-rolled. Technical delivery conditions according to DIN EN 10088-3:2014. Execution as per DIN EN 10058. The produced bars are delivered with mill test certificates according to DIN EN 10204/3.1. Available in random lengths of 4000-6500 mm. *The regular minimum order quantity is 500 kg. The finished bars are packed in bundles of approx. 500 kg. Each bundle carries two labels, providing information about dimensions, grade, heat number, weight, manufacturer's code and works inspector. Other dimensions on request. Application areas: • Mechanical engineering • Power plants • Chemical industry • Petrochemical industry • Food industry / agricultural technology • Aerospace • Ship building • Medicine and pharmaceutical • Decorative purposes / kitchen equipment • Construction industry Special features: • Non-magnetic materials • Materials for low temperatures

Our sealing brushes are available in many forms and with a wide variety of profiles. These profiles can also be used as mounting flanges. The special types consist of 11 types of sealing brushes which we can produce in a large range of variations on your request. You can choose: - All fill types, e.g. natural bristles and hair, plant fibres, synthetic filaments and wires.- The quality of the backing material, e.g. galvanized steel, stainless steel (1.4301; 1.4571) or brass.- The trim height (BH) (free bristle length- The overall length from a few centimeters to the maximum length which can be transported. We also can supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Don't hesitate to ask us for other dimensions of fixing holes, too.

Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website!

As mechanical connection elements, weld-on sockets are used wherever screw connections for measuring points need to be created quickly, reliably and economically. Along with standard weld-on sockets which is supplied in 1.4301 material, on request other materials such as special steels and alloys can also be used.

direct mounting to our Gripper Feeds, series ZVTMB or similar products with mounting bracket very costeffective flattening of the coil set best results through adjustment of both top straightening rolls rolls made of special steel and hardened and ground

We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm. Pharmaceuticals and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.

We are experts in deep-drawn parts made of stainless steel, deep-drawn parts made of aluminium and other non-ferrous metals (including brass, copper and nickel silver). To produce your perfect component, we also have the option of using carbon steel, special nickel alloys (e.g. Inconel®), but also soft magnetic materials. Each material has specific properties that need to be taken into account in the forming process. We manufacture deep-drawn parts with a diameter of 2 to 80 mm and a length of up to 120 mm. We process material thicknesses from 0.05 to 2.50 mm.Pharmaceutical and medical technology, industry, consumer and automotive: we are primarily active in these fast-growing sectors. We are not only specialists in deep drawing, but also know the industrial requirements and process chains. Depending on your requirements, we complement deep-drawing with numerous secondary finishing processes up to fully automated assembly systems.

This clamp made of galvanized steel is a special clamp for connecting medium and heavy-duty hoses to connectors on mobile and stationary units. Bandwidth approx. 20-25 mm. Band thickness approx. 1.0 – 1.8 mm

The measuring element of the load cell consists of a double bending beam on which strain gages are applied. The applied force detunes the measuring bridge so that a proportional output voltage is generated. The strain gages on the measuring element are protected against dirt and water spray by a rubber bellows. The sensor can be easily mounted via two mounting holes. The tension or compression force to be measured is introduced at the opposite end perpendicular to the sensor axis. Due to its special design, the influence by an extension (e.g. touch finger) on the measuring signal is low. Overload protection can be realized with little effort using a mechanical stop. FEATURES For tension and compression forces Measuring ranges from 0 ... 5 N to 0 ... 2 kN Relative non-linearity: ≤ ±0.1 % F.S. Very low mounting height Simple force application Material aluminium or stainless steel Special design on request burster TEDS optionally available

The digital Pendeo® Truck load cell is the optimal solution for weighbridges. Its takes the performance of our products to the next level and makes the setup, calibration and operation of weighing systems now even easier and more reliable. Ideally suited to use in weighbridges Standardized, maintenance-free, extremely compact design Extremely robust design in hermetically sealed stainless steel housing Special strain-gauge technology for significantly improved lightning protection High overload range (up to 150 %) 100 % compatible with PR 6221 Reaches stability quickly which ensures short weighing times High EMC compatibility (10 V/m) Suitable for use in ATEX zone 2/22 Additional reliability thanks to diagnostic function

CSN®cartridge type heating elements and bath heaters are eminently suitable for direct heating and warming of liquids of all kinds. Corresponding to the nature of the different media protective coverings of steel, various special steel types or porcelain can be selected. The electric heating inserts of CSN®cartridge type heating elements may be installed or dismounted without the necessity of draining the liquids from the container. The CSN®cartridge type heating elements and bath heaters are manufactured for nominal voltages from 110 up to 690 volts D.C. and A.C. In the case of higher heating capacities 3 or more elements each, being individually divisible by the factor 3 can be star or delta connected to 230 and 400 volts A.C. threephase mains. At 12 kW and a related length the elements are fabricated for 400 volts A.C. threephase delta connections. In any case the desired voltage and type of current has to be stated.

2.0 ERGO-S 230 is a compact, touchless cleanroom cleaning trolley of the second generation made of stainless steel. The special design allows the discarding of used mops on the back and therefore ensures a higher safety against cross-contamination. The unique ERGO mop wetting unit guarantees reproducible, disinfectant-saving liquid dosing in just one step and can be adapted to different fluid requirements thanks to various mop plates. The new mop discarding mechanism ensures a touchless and safe discarding of used mops. The standard PurMop® accessories include a mop handle holder on the side and a rear waste bag holder for PurMop® waste bags. 2.0 ERGO-S 230 has two additional stainless steel buckets, which can be used to store cleaning utensils.

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...

The POWDRYER™ PD08 metal powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. It corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. It also reduces the number of air inclusions in finished workpieces. Significantly higher material densities are the result. Fields of application > Particularly for metal printing products where maximum strength is required > For the printing of alloys of aluminium, titanium, tool steel, etc. > Special tools for the metal-processing industry, machine and system engineering, prototype development, and more > Aviation, aerospace, and automotive industries, plus medical and dental technology

Short description: The solid nozzle for everyday use The sewer nozzle is best suitable for a heavy everyday operation. With its 10 to 12 nozzle inserts and two different jet angles it is primarily used for the all-round cleaning of pipes up to 800 mm in diameter. The sewer nozzle has patented fluid mechanics (patent no.: DE 19516780) and is made of highly wear-resistant special steel. This universal nozzle of heavy construction is characterized by high efficiency and absolute reliability. It is an efficient and low-cost alternative to the conventional standard products.

Spring steel is a model of load-bearing capacity. Characteristic for this material group are homogeneous microstructures and optimal surfaces. It stands for above-average service life, dimensional stability and constant quality in every end product. Spring steel obtains its special properties through special treatment in the production process, whereby the even distribution of the carbon content is of particular importance. It undergoes several rolling processes and repeated heat treatments in numerous work steps - this is how we guarantee optimum quality for your products! C 67 S - C 100 S/➔ according to DIN EN 10132 - 4 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.

shock dampening for low operating noise levels absolutely sturdy and warpresistant body design with heavy doublepost guides to smoothly cut even toughest materials with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control

Shock dampening for low operating noise levels Sturdy, warpresistant design with heavy doublepost guides With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control Mounting bracket