Results for
Germany
Spring steel is a model of load-bearing capacity. Characteristic for this material group are homogeneous microstructures and optimal surfaces. It stands for above-average service life, dimensional stability and constant quality in every end product. Spring steel obtains its special properties through special treatment in the production process, whereby the even distribution of the carbon content is of particular importance. It undergoes several rolling processes and repeated heat treatments in numerous work steps - this is how we guarantee optimum quality for your products! C 67 S - C 100 S/➔ according to DIN EN 10132 - 4 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.
Request for a quoteGermany
Stainless steel gas springs function the same as their common hydraulic counterparts, but give an alternative when operating under rough conditions such as off-shore and other outdoor exposure applications. Other commons application areas for stainless steel gas spring include health care products, food industry and medical devices.
Request for a quoteGermany
SPIROL offers a line of austenitic stainless steel Disc Springs in diameters ranging from Ø8mm to Ø71mm. Austenitic stainless steel is typically used for static and low cycle applications that require a heightened level of corrosion resistance. It withstands fresh water and atmospheric marine conditions very well, and is suitable for many other industrial conditions including acidic environments. This material will continue to work harden with use so cycle life is limited, but creep resistance is good. SPIROL supplies both single Disc Springs as well as Pre-Stacked Disc Springs in custom configurations, packaged in shrink wrap with a perforated tab for easy of assembly.
Request for a quoteGermany
SPIROL manufactures Coiled Spring Pins out of 316 stainless steel to meet specific application requirements. Type 316 stainless steel is similar to 302/304 stainless steel with a slightly higher nickel content and the addition of molybdenum. The molybdenum content increases the chemical resistance of this alloy greatly. 316 exhibits superior pitting resistance against sea water, acetic acid vapors, chlorides, sodium and calcium brines, hypochlorite solutions, phosphoric acid, and the sulfite liquors and sulfurous acids used in the paper and pulp industry. This alloy is also austenitic, non-magnetic and non-hardenable using conventional methods. 316 stainless steel has better mechanical properties at elevated temperatures than 302/304 and offers excellent mechanical integrity at subzero temperatures. Typical applications for SPIROL's 316 Stainless Steel Coiled Pins include the following: marine, processing equipment, industrial, oil and gas and medical.
Request for a quoteGermany
Valve Technology, Stainless Steel Traction force range max. 1,200 N Stroke 50 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteGermany
Valve Technology, Stainless Steel Traction force range max. 150 N Stroke 20 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteGermany
Generally, helical compression springs are made from circular spring-steel wires. The first and last windings are connected to the next one and usually ground with a diameter of 0.4 mm or more. Normally, the pitch (distance between the coils) and thus the spring characteristics are constant. In reality, special forms of compression springs are, according to space conditions and various needs, often required. Do not hesitate to ask us, we gladly optimize your applications with you.
Request for a quoteGermany
Production to order – also with special-purpose materials as required: We only produce in accordance with customer specifications. Compression springs can assume a wide variety of designs and forms. Our production facilities include compression springs with wire thicknesses in the range of 0.30 to 3.00 mm with abraded ends and in the range of 0.10 to 4.00 mm with unabraded ends. Even extremely strict tolerances regarding length and strength are adhered to in our compression spring production facility. Special-purpose materials that meet specific requirements can also be integrated into production without any problems. Wire materials: All standard spring steel wires in accordance with EN 10270. Non-ferrous wires made of copper, brass and bronze. Special alloys such as: Hasteloy, CuNi44, NbZr1, TaW2. Other materials on request.
Request for a quoteGermany
Valve Technology, Stainless Steel Traction force range max. 300 N Stroke 30 mm Brilliant performance when things become tight: For specific use e.g. in tough surroundings or small spaces, the broad spectrum of ACE industrial pull type gas springs made of stainless steel with body diameters from 15 to 40 mm supplements the comprehensive programme of the ACE industrial pull type gas springs with valves. This high quality design is rust free and is more robust against environmental impact compared with standard gas pull type springs. These stainless steel gas springs are also optically appealing, very durable and available, upon request, in many stroke lengths and are also possible in many extension forces in combination with the suitable stainless steel accessories.
Request for a quoteGermany
Wrapped spring steel plain bearing | Requires maintenance | DIN 1498 | DIN 1499 FER-MET® is a spring steel plain bearing without integrated sliding material. Lubrication of the bearing point is necessary. Very high load capacity and impact resistance for heavy-loaded applications with impact loads. Very wear-resistant. A standard gap design with a straight slot and without chamfer inside [EG], but can also be manufactured with other slot shapes if required. For technical details, please visit the product page on our website!
Request for a quoteGermany
Substitution of steel spring by S-Ply® leaf spring Due to their greater spring action, steel spring packages can be replaced by fewer or even one S-Ply® leaf spring for many applications. Example: a) Substitution b) Cost calculation Steel leaf spring: 155 x 25 x 2 mm 1 package of 10 springs S-Ply® leaf spring: It is essential: with: hS-Ply = Thickness of S-Ply® spring hStahl = Thickness of steel spring nStahl = Amount of steel springs EStahl = Modulus of elasticity (here 210.000 N/mm2) ES-Ply = Modulus of elasticity of S-Ply® leaf spring (here 28.000 N/mm2) The result is that 10 steel leaf springs with a thickness of 2 mm each can be replaced by only 1 S-Ply® leaf spring with the thickness of 8,5 mm. Steel leaf spring* 10 pieces at 1,20 € = 12,00 € Intermediate package layers 18 pieces at 0,12 € = 2,16 € Total costs 14,16 € * purchase quantity > 1000 pieces, status 2009 S-Ply® leaf spring** 1 pc. at 4,13 € = 4,13 € shim plates (if applicable) 4 pc. at 0,12 € = 0,48
Request for a quoteGermany
• The mesh visor is made of galvanized wire cloth • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120 mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare
Request for a quoteGermany
• The wire cloth shield has the dimensions 200x135mm and a window opening • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail
Request for a quoteGermany
• The wire cloth shield has the dimensions 200x135mm and 2 windows with Ø 50mm • Lenses with Ø of 50mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail
Request for a quoteGermany
• The wire cloth shield has the dimensions 300x180mm and a window opening • Lenses with the dimensions 60x120mm fit into the sturdy window frames • The lenses are securely clamped in the frame by two steel springs and are easy to change • The wire cloth is surrounded by an aluminium frame • The inside of the goggles is blackened so that the wearer is not blinded by glare from the inside • The Bochumer Brille can be attached to the hard hat by means of a hinge or an aluminium rail
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
• The mesh visor is made of galvanized wire cloth • From the outside the mesh visor is covered with aluminised fabric • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare
Request for a quoteGermany
Star Track Push-Open Hinge, protruiding cranking 0 mm, drilling distance 45 mm, without spring, material: steel nickel plated
Request for a quoteGermany
• The mesh visor is made of galvanized wire cloth • From the outside the mesh visor is covered with aluminised fabric • It shields the face against radiant heat • The mesh visor has a window opening for lenses with the dimensions 60 x 120mm • Among others, blue inspection glasses, green welding glasses, or clear glasses can be utilized in the window opening • The lenses are securely clamped in the lens frame by two steel springs • Like the other face shields, the mesh visors are also attached to an aluminium hard hat bracket (e.g. GFKHH003) • The blackened inner side ensures good visibility and prevents the wearer from being blinded by glare
Request for a quoteGermany
Spring-loaded castors improve the service life of castors by reducing the amount of shock and impact load. They also protect sensitive and valuable goods by absorbing shock and impacts. Spring-loaded castors ensure that loads are distributed more evenly and reduce noise levels during transportation. The Blickle range includes four different spring-loaded brackets with a steel or polyurethane spring.
Request for a quoteGermany
Versatile, highly flexible handling hose for use in zero-pressure applications. For suction and pressure purposes with additional rings. Compressible to approx. 30% of original length. Robust version to handle solid media in the most cramped installation conditions. Outstanding axial and lateral movement. For information on temperature and media resistances please see our Simon resistances chart. Construction: Tube in special quality depending on the medium to be handled Tension and pressure-resistant special fabric inlays Optional: Concealed spring steel wire rings UV, ozone und weather-resistant cover Interior and exterior corrugated Couplings or flanges at both ends In fixed lengths with cuffed ends and/or widened hose endings. Other versions and dimensions on request.
Request for a quoteGermany
Recycling made easy Our machine knives, of uncompromising quality, have been used for decades in recycling for tyre crushing. Even when separating rubber and spring steel, they have been proven in practice day by day. Whether shredder knives, spacers, scrapers or sealing gaskets, shredder teeth for multipleshaft shredders, rotary and stator knives for granulators or machine knives for guillotines Our complete range of products also covers the most demanding challenges in recycling.
Request for a quoteGermany
We supply the European and international market with spring steel wire for temperable springs from our Iserlohn-Kalthof plant in sizes ranging from 7.0 mm to 40.0 mm
Request for a quoteGermany
Westfälische Drahtindustrie manufactures steel wire for springs for use in a wide range of applications automotive, mechanical engineering, window and door equipment, agricultural technology, furniture industry, screen wire for the filter industry, various industrial products.
Request for a quoteGermany
Westfälische Drahtindustrie manufactures steel wire for upholstery springs for use in the furniture industry and the automotive sector.
Request for a quoteGermany
• For securely holding, clamping and tensioning round, profile and/or flat material • Field of application: round and flat materials • With wire cutter • High clamping pressure due to toggle lever transmission • With quick-release and adjusting screw • Usable with one hand • Black powder coated • Pliers body made of extremely high tensile spring steel • Jaws made of chrome-vanadium steel, forged
Request for a quoteGermany
The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally open (NO) and Double acting (DA) control functions are available. An integral optical position indicator is standard. —Hermetic separation between medium and operator —Suitable for inert and corrosive liquid and gaseous media —CIP/SIP cleaning and sterilising capabilities —Autoclave capability —Optional flow direction and installation position
Request for a quoteResults for
Steel springs - Import exportNumber of results
53 ProductsCountries
Company type
Category