Results for
LIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
MUNICIPAL AND INDUSTRIAL APPLICATIONS WITH CHAMBER VOLUMES FROM 100 TO 7,000 M3 The LIPP UniCentralmix Digester with its central agitator is designed for industrial and municipal applications. The special feature of this tank, in addition to the central agitator, is the roof construction, with a high quality stainless steel diaphragm cover. The flexible LIPP System ensures each digester can be adapted to each individual application and customer requirements. KEY BENEFITS Energy efficient, central agitator Maximum leak tightness Flexible substrate composition High functional safety Stainless steel diaphragm roof without bolts External heating system available Production on site enables quick construction Low investment costs Low maintenance and durable High quality the world over PRODUCT SPECIFICATIONCENTRAL AGITATOR WITH BOLT LESS STAINLESS STEEL DIAPHRAGM ROOF At the heart of the LIPP UniCentralmix is a stainless steel tank (in Verinox) with a digester chamber
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
PATENTED DIGESTER WITH INTEGRATED GAS ACCUMULATOR LIPP KomBio Reactor for industry and local authorities The innovative and outstandingly economical solution for energy production at biogas plants and stabilisation of sewage sludge has been in use in many countries for over twenty years. Quick realisation, low investment costs, high operating safety and long service life are all characteristics that speak for themselves. The system is suitable for small and large plants and complies with industry standards. KEY BENEFITS Production of renewable energy and reduction of fossil CO2 emissions Low noise emissions Flexibility with regard to substrate composition Compact and space saving with minimal pipeline construction High functional safety Steel roof (can be insulated) to protect against the weather Individually customisable for intended application Good insulation reduces heating demand Patented stirring systems Fast construction with production on site Low investment costs
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
Gas storage systems by Lipp have been successfully installed in more than 300 projects in Germany and worldwide. The gas storage capacity extends from 30 to 5,000 m³. The gas resistant PVC gas holder is protected by a galvanised steel cylinder. The self supporting roof is made of 1.4301 high grade stainless steel. The Lipp gas holder is offered as a complete system, including sensors and built in parts as well as steel construction, and can be easily integrated into an existing system. The main area of application of the Lipp gas holder is municipal waste water treatment plants and landfills which want to balance out fluctuations in gas production and at the same time need a buffer store for possible downtimes. A further gas holder may also be of interest for direct marketing of biogas, where feed in at certain times is necessary. The Lipp gas holder is especially attractive when considering the fact that electricity cannot be stored. But (bio) gas, which is used for power generation
Request for a quoteLIPP GMBH BEHÄLTER UND SYSTEMLÖSUNGEN
Germany
FOR COVERING LIQUID, SOLID OR GASEOUS MEDIA There are many factors to be taken into account in order to ensure that the medium to be stored is properly covered. To guarantee that the right type of cover is chosen, aspects such as structural requirements, container type, plant concept and the medium to be stored need to be considered. Lipp offers a wide range of roofs and covers which can be tailored and adjusted to each application. They include both roofs developed by Lipp and also solutions designed by our partners. There are also simple foil roofs to choose from for gas storage facilities as well as single skin, double skin or double diaphragm roofs. The LIPP stainless steel diaphragm roof also offers a particularly high quality solution for the storage of volatile or explosive substances while the versatile LIPP segment roof completes the range of covers. ROOFS AND COVERS Foil roofs Single skin roofs Double skin roofs Double diaphragm roofs
Request for a quoteFLOTTWEG SE
Germany
In small sewage treatment plants, investment costs play a decisive role. In stationary dewatering systems, for example, the construction of a new building can be significantly costly. You can avoid those costs with mobile container systems for sludge dewatering. Container-based solutions are a practical alternative to fixed dewatering installations.. A container is a true "plug and play" option – just connect it and start dewatering. ►Sludge dewatering in a one-man operation: comfort and personal safety, with control of the dewatering installation directly on-site. ►Year-round comfort: raised roof; insulated walls and roof, consistent use of stainless steel. ►Minimized maintenance effort: The roof can be opened by a single person using a manual hydraulic lifting system; the decanter can be opened with a crane built into the container. ►Optimized for operation in the smallest of spaces ►Easy transport with all current truck types
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ABS SAFETY GMBH
Germany
This low-cost, stainless steel roof hook has a cranked shaft - perfect for bridging the roof battens - and is secured in a few easy steps by simply screwing 2 stainless steel screws through the counter battens into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Simply screwed onto a wooden beam (min. 60 mm x 120 mm) Incl. installation materials (screw length: 160 mm length, Ø 8 mm)
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel, type B roof safety hook for metal seam roofs is suitable for all directions of load (apart from axial loads). It is simply clamped onto a seam without needing to penetrate the roof surface. Our roof hook is installed quickly and easily using the 4 nuts and bolts supplied. Roof safety hook in accordance with EN 517:2006, type B Anchorage point for PPE + ladder hooks For stainless steel ≥ 0.5mm; copper and titanium zinc ≥ 0.6mm; aluminium ≥ 0.7mm Simple, penetration-free installation using just 4 bolts Designed for rounded-edge and standing edge roofs Incl. stainless steel installation set
Request for a quoteABS SAFETY GMBH
Germany
Thanks to its special base plate, this stainless steel roof safety hook can be flexibly adjusted to fit the angle of your roof surface. The cranked shaft is designed to bridge the battens. It is installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the beam below. Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Base plate allows flexible installation Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel roof safety hook - specially designed for tiled roofs - is equipped with a cranked shaft for bridging the roof lathing. Is it simply installed by screwing the 2 stainless steel screws supplied through the counter lathing and into the woodem beam. We also supply an optional installation set for flexible attachment to a specially-prepared wooden panel (instead of a beam). This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel roof safety hook with its flat shaft is simply installed on a continuous wooden beam. The 2 stainless steel screws supplied are screwed into the beam through the counter lathing/panelling. Special screws are also available for installing the device on top of over-rafter insulation. This roof hook can be implemented as a natural conducting component in a lightning protection system (100 kA) in accordance with EN 62305-3 Roof safety hook in accordance with EN 517:2006, type B Anchorage point + ladder hook Designed for load-bearing wooden structures Simply screw it onto a wooden beam (also suitable for over-rafter insulation) Min. beam dimensions: 60 mm x 120 mm Installation materials included
Request for a quoteABS SAFETY GMBH
Germany
This stainless anchorage point can be installed on a range of different seams and is available in two models. Simply install this anchorage device from above using the stainless steel blind rivets provided. We also supply models for usage as an intermediate bracket or T-junction in a lifeline system. EN 795:2012, A + CEN/TS 16415:2017 Sandwich and trapezoidal sheeting (cold roofs) For steel plating ≥ 0.45 mm; Aluminium ≥ 0.8 mm Distance between the holes: 180-250 mm / 280-333 mm Installation materials included
Request for a quoteABS SAFETY GMBH
Germany
Install this kind-to-you-roof, stainless steel anchorage point on trapezoidal sheeting using just one single toggle bolt (included). After installation, the supporting rod (Ø 42 mm) fits the opening made in the insulation layer perfectly. EN 795:2012, A + CEN/TS 16415:2017 Trapezoidal sheeting ≤ 0.75 mm Ideal for retrospective installation Installation materials included
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel anchorage point can be installed on standing seam roofs made of steel, copper, aluminium or titanium zinc without penetrating the roof surface. Depending on the subsurface, this kind-to-your-roof device is attached using the aluminium or brass clamps supplied in the package. EN 795:2012, A + CEN/TS 16415:2017 Clamped onto two adjacent seams - completely penetration-free Seam intervals: 300 - 450 mm / 420 - 660 mm For steel and stainless steel ≥ 0.5 mm; copper ≥ 0.6 mm; aluminium & titanium zinc ≥ 0.7 mm For Rheinzink and similar systems; also suitable for copper standing seam panels (Cu) Incl. installation set
Request for a quoteABS SAFETY GMBH
Germany
This guard rail - made of aluminium and stainless steel - is kind to your roof as it is simply weighed down using special weights without penetrating your roof surface. This collective protection mechanism, which is 1100 mm high, can be used to secure a domed rooflight up to 2.5 m x 2.5 m on a flat roof with a maximum pitch of 10°. EN 13374:2013, A Penetration-free installation Designed for flat roofs with a pitch of up to 10° Suitable for domed rooflights: 2.5 m x 2.5 m Handrail height: 1100 mm Weighed down using special UV-resistant plastic weights Weights: 760 x 800 mm (2 x 25 kg) Incl. special fleece material to protect the surface
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel anchorage point (Ø 16mm) and base plate (290 x 200 mm) were developed for usage on a warm roof. The anchor is easily installed from above using the 4 specially prepared toggle bolts included in the package. EN 795:2012, A + CEN/TS 16415:2013 Trapezoidal sheeting (positive/negative), steel ≥ 0.63 mm Warm roofs, distance between the bores: 180 to 250 mm incl. specially prepared toggle bolts Add a supporting tube for usage as an end or corner post in a lifeline system
Request for a quoteResults for
Steel roofs - Import exportNumber of results
16 ProductsCountries
Company type