Steel fittings - Import export

Our PEKI mechanical brass valve series has been manufactured for decades from high-quality hot-pressed parts and precision turned parts, which are assembled with modern plastic injection-molded parts and sealing elements made in Germany. The PEKI is a proven construction which has been tested millions of times. It has been further developed and is now available for the every first time completely in stainless steel / V2A. Many liquids are easily and safely regulated with the PEKI series via its mechanical level control.

Valve mechanical shaft fittings,CNC machining.

These are the supports parts used for machine,using casting process, the complex structure.

Valve machined parts.

These are the pin ring made by stainless steel,which is the accessories used for sensor.

This is the accessories used in valve.

These are the accessories used in Hydraulic valve assembly.

Made of AISI 316 stainless steel for aggressive environments

The compression-type fittings are the link between the thermocouple and the test area and facilitate precise adaptation. After installing the compression-type fitting, the thermocouple can be inserted and clamped in with the desired installation length. That makes it possible to perform individual measurements with self-defined installation lengths directly onsite.

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

The term metal bellows refers to a structure that is composed of one or more stainless steel sleeves fitted into one another and is rendered elastic by the introduction of parallel corrugations. Metal bellows can be arranged to complete combinations of metal bellows (expansion joints). Thus, every specific requirement can be met. As raw material for the sleeve production, stainless steel strips or sheets with a thickness of 0.15 - 3 mm in the standard grades are used: 1.4541 / AISI 321 1.4571 / AISI 316Ti 1.4404 / AISI 316L 1.4307 / AISI 304L                                                              material with high chemical resistance and temperature resistance:   1.4435 / AISI 316L 1.4539 / AL 904L 1.4878 / AISI 321H 1.4828 / AISI 309 1.4462 / AISI 318 LN 1.4410 / AISI F53 or additional special materials:      1.4876 / Incoloy 800HT 2.4858 / Incoloy 825 2.4856 / Inconel 625 2.4816 / Inconel 600 2.4610 / Hastelloy C-4 2.4819 / Hastelloy C-276 2.4602 / Hastelloy C-22 3.7035 / Tit

Leak detector high detection sensitivity for pressurised piping and containers, e.g. on compressors, steel bottles, fittings, shut-off valves, breathing devices, oxyacetylene gas and inert-gas arc welding devices, Bunsen burners, valves, screw fittings of compressed-air lines etc. Suitable for compressed air, refrigerant, acetylene, butane, natural gas, carbon dioxide, gaseous oxygen, propane, town gas, nitrogen, hydrogen and, ammonia Suitable for checking the safety of systems with combustible gases and for avoiding financial losses through unrecognized leaks Advantages and benefits Frost-proof to -15°C Saves energy and warns of gas loss Contains corrosion protection inhibitors Tested by the DVGW in accordance with DIN EN 14291 Non-combustible Economical in use

The Tea Warmer is a most practical stainless-steel accessory that helps tea keep its temperature right where you want it. Designed wih elegance and style, it is a perfect match to all Tea Control non-electric tea makers. It is outstandingly stable and stands firmly on any flat surface. Tea is now more enjoyable and stays warm for longer! Highlights stainless-steel material fits all Tea Control non-electric tea makers diameter: 14 cm (approx. 5.5 in.) height: 7,5 cm (approx. 2.9 in.) Packaging 1 tea warmer / box 12 boxes / carton 648 boxes / pallet

Service pressure: 0-26 Mpa Service temperature: -40°C up to 85°C Reliable in filling and operation direction Compact design Stainless steel, Aluminium HC-plated, corrosion resistant All seals are suitable for CNG EC 79 is planned The fitting is equivalent of heavy metal regulation Burst pressure: > 200 Mpa, 20° Curved stainless steel tubes from 6, 8,10mm and 3/8", ½" Tightness: 1x10-5mbar l/s, 20°C, 100% He

- Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar)

- Metric thread - Chambered O-ring - Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar) - Not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Not designed for steady motion of the tube

- Metric thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - swiveling, but not designed for steady motion of the tube

- Metric thread- With hexagon socket - Chambered O-ring - Seals FKM - Material 1.4301 / 1.4307 - Temperature range: -20 to +120 °C - Pressure range: -0,95 to 16 bar - Media: Air, vacuum and liquids

- Thread metric - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar)

— Whitworth pipe thread DIN ISO 228 — chambered O-ring — Seals FPM — Material AISI 316L (1.4404) — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 232 psi (-0.95 to 16 bar) — Not designed for steady motion of the tube

- Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar)

- Whitworth pipe thread - Frame components with media contact: Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Frame components without media contact: Material brass chemically nickel-plated - Temperature range 32 to 176 °F (0 to +80 °C) - Working pressure range 0 to 362 psi (0 to 25 bar)

The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Bend 30° with plain ends