Results for
EMKA BESCHLAGTEILE GMBH & CO. KG
Germany
EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001.
Request for a quoteMINEON HANDEL GMBH
Germany
Mirror Polishing Stainless Steel 304 Hinge,Size:101.5*26mm and 152.5*28mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Mirror Polishing Stainless Steel 304 Hinge,Size:38*57mm and 38*70mm,Easy Installation,ROHS compliance
Request for a quoteMINEON HANDEL GMBH
Germany
Mirror Polishing Stainless Steel 304 Hinge,Size:38*76mm and 38*102mm,Easy Installation,ROHS compliance
Request for a quoteFORBO SIEGLING GMBH
Germany
Side flexing and spiral belts Pitch 25 mm (0.98 in) Design characteristics Suitable for both straight and radius conveying up to 45 % open area for excellent air circulation and drainage Stainless steel hinge pins for high load capacity, lateral stiffness, fewer belt supports and minimum belt lifting in curves No potential belt edge catch points due to safe fixing of hinge pins Components: Sprockets In different sizes with round or square sprocket bore Profiles In different heights and designs for inclines Side guards In different heights for retention of bulk products
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The housing, the lid and the frame of the floor box 2008B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 8 installation devices. The sockets are VDE certified. Further equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The complete floor box 2004B is made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be fitted with various floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 4 installation devices. The sockets are VDE certified. Further equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
The housing, the lid and the frame of the floor box 2003B are made of 1,5 mm stainless steel. The hinged lid is opened without tools and can be covered with your own floor coverings. When closed, the floor box is suitable for cleaning with wet sweepers. The device unit can contain up to 3 installation devices. The sockets are VDE certified. Further equipment variants on request.
Request for a quoteFORBO SIEGLING GMBH
Germany
Side flexing and spiral belts, Pitch 50 mm (1.97 in) Belts for medium to heavy-duty food and non-food applications Design characteristics Suitable for both straight and radius conveying 57 % open area for excellent air circulation and drainage Stainless steel hinge pins for high load capacity, lateral stiffness, less belt supports and minimum belt lifting in curves No potential belt edge catch points due to safe fixing of hinge pin Components: Sprockets In different sizes with round or square sprocket bore Profiles In different heights and designs for inclines Side guards In different heights for retention of bulk products
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Floor socket 3303E made of stainless steel, ground, with hinged lid. Particularly suitable for low installation depths, e.g. in the exhibition area, kitchen, etc. Further equipment variants on request. The frame and the lid are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Floor socket 3202E consisting of a hinged connection module made of 1,5 mm stainless steel, polished. The hinged lid also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for raised floors, exhibition areas, etc. Further equipment variants on request.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Floor socket 3302E made of stainless steel, ground, with hinged lid. Particularly suitable for low installation depths, e.g. in the exhibition area, kitchen, etc. Further equipment variants on request. The frame and the lid are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Floor socket 3203E with connection module made of stainless steel, polished, with hinged cover. Can be used as a desk connection panel or floor box. The hinged cover also closes when the plugs are inserted. The equipment rack can be removed for assembly. Particularly suitable for work surfaces, exhibition areas, etc. Further equipment variants on request. The frame and the cover are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Floor socket 3301E made of stainless steel, ground, with hinged lid. Particularly suitable for low installation depths, e.g. in the exhibition area, kitchen, etc. Further equipment variants on request. The frame and the lid are made of 1,5 mm stainless steel and the receptacle box is made of sendzimir galvanized sheet steel.
Request for a quoteFATH GMBH
Germany
Combi Hinge to hinge panels or aluminum profiles diferent Models, Materials, Sufaces, Colors combinable hinge wings: 20, 25, 30, 35, 40, 45, 50, 60 Material: Plastic PA, glass fiber reinforced, electrostatical discharging, Stainless Model: detachable, non-detachable, with/without locking lever, electrostatical discharging, centerings bolts (optional), stainless steel axis Surface: laquered, Matt nickel plated and chromated Color: black, grey, aluminum colored, further colors on request Fastening: using countersunk screws
Request for a quoteEMKA BESCHLAGTEILE GMBH & CO. KG
Germany
EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001.
Request for a quoteEMKA BESCHLAGTEILE GMBH & CO. KG
Germany
EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EMKA BESCHLAGTEILE GMBH & CO. KG
Germany
EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. The 4B-320 series adjustable hinge is capable of 180° opening angle and features a full stainless steel (AISI 316) construction for both washer and pin, with a raw surface finish. It can be mounted by using standard screws and is fit for single cabinets and in-line cabinets with single or double doors.
Request for a quoteMINEON HANDEL GMBH
Germany
Mirror Polishing Stainless Steel 304 Hinge,Size:145*59mm,Easy Installation,ROHS compliance
Request for a quoteGROTHAUS PENDELTÜREN GMBH & CO. KG
Germany
Swing doors have a long tradition in both the catering sector and interior store design. We have set out to reinterpret swing doors and turn them into striking interior design features. These doors – just as all Grothaus swing doors – are made to measure and are available in a wide range of colours and wood finishes, including, on request, from any laminate producer. The doors' robust and hardwearing stainless steel hinges are countersunk flush inside the door leaf. They are very smooth acting and feature a spring tension adjuster.They are easy to fit into both existing and new buildings, feature a stainless steel profile and can be installed directly into a reveal or an existing wooden frame. Optionally, we also provide stainless steel Uframes.
Request for a quoteGROTHAUS PENDELTÜREN GMBH & CO. KG
Germany
This PE double action impact door with its stainless steel hinge is extremely versatile. It complies with very high hygiene standards, is cold and water resistant, hardwearing and hence ideally suited for use in the food production This PE double action impact door with its stainless steel hinge is extremely versatile. It complies with very high hygiene standards, is cold and water resistant, hardwearing and hence ideally suited for use in the food production sector. Its door leaves and hinges are impact resistant and capable of withstanding the stresses of highly demanding use. This makes them perfect for use in the catering sector, supermarkets and commercial kitchens.
Request for a quoteGROTHAUS PENDELTÜREN GMBH & CO. KG
Germany
PVC swing doors with stainless steel profiles are designed for use in areas subject to increased hygiene requirements. They are most frequently used behind revolving and sliding doors in cold storage and freezer rooms. The GP100's stainless steel hinges are very haardwearing and resistant to frequent impacts by forklifts. This practical and durable PVC traffic door is also highly suitable for use in refrigerated trucks to maintain the temperature in the storage area.
Request for a quoteEDELSTAHL WEIMAR GMBH
Germany
Machine, work and operating platforms from stainless steel for aseptic and hygienic application - for example in the food, beverage, pharmaceutical or chemical industry. We offer the complete package including design and static calculation, manufacturing and assembly. We guarantee stainless steel manufacturing quality made in Germany, quick throughput times and competitive pricing. We are your reliable partner for stainless steel platforms and mezzanines!
Request for a quoteSANHA GMBH & CO. KG
Germany
The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® Bend 30° with plain ends
Request for a quoteSANHA GMBH & CO. KG
Germany
The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan® pipe Bend 90° female/male
Request for a quoteSANHA GMBH & CO. KG
Germany
The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan-ECO pipe 6 m rods
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The premium installation system consists of high-grade NiroSan®-Industry press fittings with a red moulded sealing ring made from FKM (fluoro and perfluoro elastomers) for temperatures of up to 200 °C and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® Industry press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Industry press system and its components are certified in accordance with the rules and regulations of all important British and Continental certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The piping system consists of high-grade NiroSan® press fittings with an EPDM (=ethylene propylene dien rubber) moulded sealing ring and NiroSan® stainless steel system pipes according to EN 10312. All NiroSan® press fittings are made from the premium stainless steel type 1.4404 / AISI 316L (for pressing components) and 1.4408 (for precision cast threaded stainless steel components). The material 1.4404 contains at least 2.3 % molybdenum, yet less carbon than the conventional type 1.4401. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® press system and its components are certified in accordance with the rules and regulations of all important European certification bodies. NiroSan Bend 90° M-thread/nut
Request for a quoteResults for
Stainless-steel hinges - Import exportNumber of results
168 ProductsCountries
Company type