Results for
JACOB GMBH
Germany
The PERFECT cable gland made of stainless steel 1.4305 is the perfect cable entry solution for many industrial applications. Features: — integrated anchorage for cables — protection against twisting — wide sealing and clamping range — for cables from 3 to 42 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 / IP69 — Test standard UL 514B — with metric thread M12 - M63
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Anti-Slip System for green roofs with roof pitches of up to 45°; with thrust thresholds and stainless steel cables.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Raised access floor socket 8502E with two slots. The housing of the hollow floor tank is made of sendzimir galvanized sheet steel, the frame and the lid are made of polished stainless steel. The lid has two cable outlets and closes in a straight or angled shape even when a standard plug is plugged in. Other equipment variants on request.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available
Request for a quoteBDSENSORS GMBH
Germany
The stainless steel probe LMK 387 was developed for level and gauge measurement in wastewater, sludge or water courses. The mechanical robustness of the front-flush ceramic diaphragm faciliates an easy disassembly and cleaning of the probe in case of service. Compared to the level probe LMK 382 the outside-diameter is only 22 mm, which allows an easy installation and backfitting in 1" tubes or in cramped fitting conditions. An IS-version is also available. Features: — nominal pressure: from 0 ... 4 mH2O up to 0 ... 100 mH2O — accuracy: 0.35 % (opt. 0.25 %) FSO — diameter 22 mm — diaphragm ceramics 99.9% Al2O3 (on request) — highly appropriated for wastewater, sludge and viscous media Optional Features: — IS-version — housing material titanium — drinking water certificate according to DVGW and KTW — temperature element Pt 100 — mounting with stainless steel tube — different kinds of cables and elastomers
Request for a quoteBDSENSORS GMBH
Germany
The separable stainless steel probe LMP 308 is designed for the continually level measurement of water and thin fluids. In order to facilitate stock-keeping and mainten-ance the transmitter head is plugged to the cable assembly with a connector and can be changed easily. Features: — nominal pressure: 0 ... 1 mH2O up to 0 ... 250 mH2O — accuracy: 0.35 % (opt. 0.25% / 0.1 %) FSO — diameter 35 mm — cable and sensor section separable — excellent long term stability — high accuracy Optional Features: — IS-version Ex ia = intrinsically safe for gas and dust — SIL 2 (Safety integrity level) — customer specific versions — mounting accessoires as cable gland and terminal clamp of stainless steel — different kinds of cables — different kinds of seal materials
Request for a quoteJACOB GMBH
Germany
The WADI heat cable gland made of stainless steel 1.4404 / AISI 316L is the perfect cable entry solution for high temperature applications up to +200°C. It has also a very good resistance against many chemicals. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — very high UV, ozone and weather resistancy — temperature range -40 °C / +200 °C (dynamic) — protection grade IP 66 / IP67 / IP69 — very good resistance against many chemicals — with metric thread from M12 to M63
Request for a quoteJACOB GMBH
Germany
The WADI one cable gland made of stainless steel is the perfect cable entry solution for demanding applications. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +100 °C (dynamic) — protection grade IP 66 / IP68 up to 15 bar (30 min.) / IP69 — material of sealing insert fulfils UL 94 HB — with metric thread from M12 to M63
Request for a quoteKROHNE MESSTECHNIK GMBH
Germany
Cable thermometer using RTDs The cable temperature assemblies of the TRA-W series are constructed differently and adapted to typical operating conditions. The most important differentiating factor of the cable assemblies is their process connection, the operating temperature range and the insulation material of the connecting cable. Execution: clamp-on variant Process connection: copper block, 8 x 10 x 40 mm, with Ø 3mm MI-cable Temperature range: -50 … +300°C Material: copper / stainless steel Sheath - Ø: – Cable material: Elexar ( £ 105 °C) IP protection class: 54
Request for a quotePFLITSCH GMBH & CO. KG
Germany
Safely carries single cables Where single cables are to be routed in a group and supported firmly without the use of trunking, the Single Wire System SWS from PFLITSCH offers a better alternative to cable ties, clamps, hoses or hook and eye fastener tape. Your advantages: Bendable VA stainless steel rod for robust, flexible cable routing support Corrosion-resistant system Easy to clean, open cable routing Easy installation with VA stainless steel or plastic mounts SWS consists of bendable and yet robust 5 mm support rods with open routeing rings into which the cable is simply laid. Lines and hoses up to 16 mm can be safely accommodated – on straight sections or around corners. The support rods are attached with bolted-on plastic mounting plates or VA stainless steel mounts welded on to the machine body for example.
Request for a quoteABS SAFETY GMBH
Germany
Upgrade your ABS-Lock X anchorage point for usage as a corner or end support in a lifeline system. This additional stainless steel reinforcement (Ø 42 mm) includes an energy absorber and is capable of withstanding the pre-tensioning load exerted on your stainless steel cable. Supporting tube for Ø 16 mm posts Designed for usage as a corner or end support in a lifeline system Includes an energy absorber
Request for a quoteABS SAFETY GMBH
Germany
These traversable lifeline systems offer an uninterrupted fall arrest solution for installation along the edge of a fall danger zone. Both systems have been awarded national technical approval and are available for a large range of surfaces. Simply attach a glider to skate straight over the intermediate supports and corner elements in the system. National technical approval ("abZ"): Z-14.9-786 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, C & CEN/TS 16415:2013 Add an ABS TI-FlexCurve (corner element) and ABS TI-Bracket (intermediate bracket) for a fully-traversable system Suitable for installation on virtually any surface Robust 8 mm or 6 mm stainless steel cable (V4A) Ideal for flat roofs (schools, gyms, warehouses etc.) Simultaneous protection for up to 4 individuals
Request for a quoteABS SAFETY GMBH
Germany
This stainless steel vertical lifeline system is designed for permanently-installed, standard ladders made of steel or aluminium (welded-on or crimped rungs) and is simply clamped onto the rungs of your ladder. We also offer an optional model with a longer protrusion (130 cm) which allows the user to climb on and off safely. EN 353-1:2018 (incl. in former times CNB/P/11.073) Suitable for simultaneous usage by 2 individuals (1 person per glider Fixed guide with stainless steel cable (8 mm) A range of top section protrusions available - up to 130 cm Specially-designed vertical ladder glider with a blocking mechanism to apply the brakes in the case of a fall For rungs measuring max. 3.5 cm x 3.5 cm; other sizes available upon request
Request for a quoteABS SAFETY GMBH
Germany
When installed overhead, these fully-traversable lifeline systems (8 and 6 mm) offer the utmost in protection. Both anchorage systems have been awarded national technical approval for numerous surfaces and are capable of protecting up to 4 individuals simultaneously. National technical approval ("abZ"): Z-14.9-786 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, C & CEN/TS 16415:2013 Add an ABS TI-FlexCurve (corner element) and ABS TI-Bracket (intermediate bracket) for a fully-traversable system Various system supports are available for all surface types Ideal for overhead usage or on a facade 8 or 6 mm stainless steel cable (316) Simultaneous protection for up to 4 individuals
Request for a quoteABS SAFETY GMBH
Germany
These traversable, stainless steel lifeline systems (8 or 6 mm) are designed for flexible installation on a facade or wall. A variety of curve and corner elements can be used to run the system over an edge or around an obstacle. Both systems have been awarded national technical approval and provide reliable fall protection for up to 4 individuals. National technical approval ("abZ"): Z-14.9-786 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, C & CEN/TS 16415:2013 Compatible with most ABS Safety system supports Suitable for Installation on virtually any surface 8 or 6 mm stainless steel cable (V4A) Designed for facades, crane ways, filling plants, industrial, bus, plane and maintenance halls etc. Simultaneous protection for up to 4 individuals
Request for a quoteABS SAFETY GMBH
Germany
These lifeline systems have been awarded national technical approval and are available in 2 cable thicknesses (6 and 8 mm). They can be used to provide simultaneous fall protection for up to 4 individuals. These stainless steel anchorage systems can be installed on a flat or pitched roof or along a facade to secure your access routes - and there are virtually no limits as to how far you can extend them. National technical approval ("abZ"): Z-14.9-786 (pls. observe the installation instructions provided in the "abZ") EN 795:2012, C & CEN/TS 16415:2013 Designed for use in combination with virtually any ABS Safety post Suitable for installation on most common roof types 6 or 8 mm stainless steel cable (V4A) Simultaneous protection for up to 4 individuals
Request for a quoteGEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: stainless steel AISI 303, lamellar insert: PA 6, sealing ring: CR, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar / IP69k, test standard: UL 514B, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -30 °C to +100 °C, connection thread: M12 - M63
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GEISSEL
Germany
wege® - the flexible cable gland system in brass, stainless steel and plastic. material: brass nickel-plated, lamellar insert: TPE, o-ring: NBR-Oz, protection class: IP66/IP68 - 5 bar, strain relief: DIN EN 62444 Tab. 2A, range of temperature: -40 °C to +100 °C, short connection thread with two-piece sealing insert, M16 - M63, short connection thread with one-piece sealing insert, M12 - M63
Request for a quotePARTEX MARKING SYSTEMS GMBH
Germany
Material Acid-resistant stainless steel to Swedish Standard SIS2347/SIS 2348, equivalent to AISI316 L and DIN 17440. Print Stamped Text Single-character markers: 0– 9, A– Z, Å, Ä, Ö, special characters and symbols. Multi-character markers: alphanumeric characters 0 – 9, A – Z, Å, Ä, Ö, special characters and symbols with customized text arranged in either one or two rows. Temperature range Non-flammable. Resistance Good resistance to heat, cold, corrosion, acids, chemicals etc. Attachment Stainless steel cable ties
Request for a quotePARTEX MARKING SYSTEMS GMBH
Germany
Automatic or manual cable tie fixing tool for stainless steel cable ties
Request for a quoteLIQUOSYSTEMS GMBH
Germany
VariAll is a stainless steel cable routing and installation system for the hygienic laying of cables. The system is a product designed for hygiene: simple and accessible for cleaning. This cable management system is a quality product with a long service life. All cable routing elements are made of 5 mm round material - with an optical finish. This protects the cables and hoses. The cable routing elements are supplied in lengths of 3 meters. Thanks to a wide range of mounting accessories, installation on the wall or ceiling is very easy. The elements are joined together with screw connectors. The complete hanging technology is innovative in this mounting system. This means that the electrician can work comfortably at the assembly table when installing the fermentation control. This system creates a new, simpler and more comfortable way of working for the installer on site at the construction site.
Request for a quoteEDELSTAHL WEIMAR GMBH
Germany
Machine, work and operating platforms from stainless steel for aseptic and hygienic application - for example in the food, beverage, pharmaceutical or chemical industry. We offer the complete package including design and static calculation, manufacturing and assembly. We guarantee stainless steel manufacturing quality made in Germany, quick throughput times and competitive pricing. We are your reliable partner for stainless steel platforms and mezzanines!
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteSANHA GMBH & CO. KG
Germany
The installation system consists of high-quality NiroSan® Gas press fittings with yellow moulded sealing rings made of HNBR (hydrogenated nitrile butadiene rubber) and NiroSan® stainless steel system pipes according to EN 10312, DVGW-Arbeitsblatt GW 541 and EN 10312. All NiroSan® Gas press fittings are made of the material 1.4404 / AISI 316L (for moulded fittings) and 1.4408 (for threaded fittings and stainless steel precision castings). The material contains at a minimum of 2.3 % molybdenum and a lower carbon content than the conventional steel quality 316. Thereby these materials are not only of equal value but in addition, material 1.4404 / 316L stands out on account of its considerably higher corrosion resistance. The NiroSan® Gas press system is certified in accordance with and all important European certification bodies.
Request for a quoteResults for
Stainless steel cable - Import exportNumber of results
47 ProductsCountries
Company type
Category