Square steel - Import export

Design: Frame structure made of chrome nickel steel square tubes 25 x 25 mm, completely welded. Tray supports made of chrome nickel steel angle material. Mounted on 4 corrosion protected, ball bearing castors. 2 of them lockable. 4 distance holding bumpers. Height distance of tray supports 125 mm. Also available with stainless steel doors (stainless steel facing closed all around).

Floor box 8808A with a square housing made of stainless steel and anodised natural aluminum lid. Inside there are two aluminum device carriers for 4 units each, alternatively other combinations are also possible. It can be installed at any point in the floor, as pipes are used to feed the cables. Lid also closes when the plugs are inserted. Due to the low installation height, this version is particularly suitable for floors in old buildings. Further equipment variants on request.

Melamine table top: - chipboard according to DIN 68765, melamine resin coated on both sides and 2 mm ABS edge - the table top is hygienic, it is not harmful to food, and is simple to clean High-quality frame DT30: - stable steel construction, square columns with 2 motors - 3-stage lifting system (telescopic) - dual motors - height adjustment: 62 - 127 cm (without table top) - max. speed: 35 mm/s without load - collision protection - low noise level: < 45 dB - color: polyester powder-coated - LED display with 4 memory positions - plastic glides for safe standing - level compensation up to 10 mm Selection options: - table top color - table top thickness - dimension - frame color

Material: 1.4841 (X15CrNiSi25-20) AISI 314 Properties: highly heat-resistant, corrosion- and acid-resistant, not magnetizable, austenitic. In-house developed production equipment allowos us to produce fibers of this material in the grades coarse with an average fiber strength of approx. 120 μm, medium 90 μm and on demand fine 60 μm. STAX stianless steel fibers 1.4841 are available as following: Strand on reels with defined weight per meter and a width of 100 mm Short fibers according to customer requirement Fleece on bales with defined weight per square meter STAX stainless steel fibers 1.4841 find application in the automotive area, as filter material, sound damping and -insulation as well as in many other areas with high demand to heat-resistance. If you are looking for stainless steel fibers for your specific application, please do not hesitate to contact us.

Square stainless steel tubular heaters BASE-flex (1.4541) are a reliable industry standard for the use in heating platens and manifolds. In contrast to traditional tubular heaters with a round section which have to be bent by machines, square BASE-flex can be fitted into any rectangular groove with simple hand tools. Moreover, the square shape results in a bigger heat emitting area of up to 80% compared with a corresponding round section. Finally, the easy manual mounting saves the usually high technical expenditure for casting-in / soldering / cementing of bent round tubular heaters. A soft version of the BASE-flex, the NICKEL-flex (2.4068) is available as special execution. Due to the soft, easy to form nickel material, the NICKEL-flex is suitable for manual mounting with hand tools in round sections, too. Furthermore, Nickel has a better capability to conduct heat compared with stainless steel.

1206 basquill dead lock, surface mounted, 7 mm square spindle aperture, lock case steel nickel plated, right hand lock, for rods 10 x 3 mm, hub 15,5 mm, 2 rod strike plates

7030 espagnolette lock, surface mounted, 7 mm square spindle aperture, lock case steel nickel plated, 35 mm backset, adjustable from right to left, for rods 8 x7 mm, incl. accessory for espagnolette, lock delivery condition: right

QUADRO 80 gets its name from the square steel pipes of a diameter of 80 mm which form the profile basis of the system. Due to the particular properties of the spheroidal graphite parts, a higher than average bearing strength is achieved. The overall static equilibrium of the system is also very high due to its combination with steel profiles. QUADRO can be assembled quickly and easily at the point of use, thanks to its sophisticated technology. The articulated parts are equipped with a swivelling limitation. A control lamp adapter completes the extensive package. Compatible command enclosures include commandCASE, topVISION and multiVISION.

QUADRO 50 gets its name from the square steel pipes of a diameter of 50 mm which form the profile basis of the system. Due to the particular properties of the spheroidal graphite parts, a higher than average bearing strength is achieved. The overall static equilibrium of the system is also extremely high due to its combination with steel profiles. QUADRO can be assembled quickly and easily at the point of use, thanks to its sophisticated technology. The articulated parts are equipped with a swivelling limitation. A control lamp adapter and a QUADRO 50/taraPLUS elbow for connection to the taraPLUS system complete the range. Compatible command enclosures include commandCASE, topVISION and multiVISION.

Installation set valve valve, type: rigid, version square

Spindle extension consisting of a rigid, hot-dip galvanized key rod and a separate, rigid PE protection tube. Square bars 13 × 13 mm, hot-dip galvanized. Operating square suitable for operating key DIN 3223 E (House connection fittings). Connecting pins in stainless steel v2a. Coupling sleeve made of iron GGG40, galvanised, with slot and VA-Clip-pin (tool-free connection system). PE-HÜLSROHR with centering cap and universal-level bell, dirt-proof and water-repellent

Telescopic Spindle Extension T3 for ball valves with polygon. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304) with connection drillings accord. to GW336. Suitable for operating key DIN 3223 C or E (DN25-50). Toolles assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal round bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.

Telescopic Spindle Extension T2 for gate valves. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques according to GW336. Two-piece PE protection tube system with a bonded centring cap, universal bell and sealing. Completely dirt-proof and waterrepellent. Optional: Marking disc (double sided gas and water) as well as bell adapters/sealing inserts.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 500Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter

A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), coupling (bottom adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304). Square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 140Nm. Three-piece PE protection tube system with a bonded centring cap, universal combi bell and sealing. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

A three-piece rod made of stainless steel 1.4301, coupling (bottom adapter) precision casting, galvanised accord. to DIN EN 12329 und DIN 50961 (alternatively made of stainless steel AISI 304), square cap (top adapter) (accord. to DIN 3223 E) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304). Toolless assembly of the spindle extension with a stainless steel clip pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position through a PE sealing collar on the steel tube. Torques up to 250Nm. Four-piece PE protection tube system with a bonded centring cap, universal combi bell with sealing/sealing insert and a grooved and suspension system as rotation lock. Completely dirt-proof and water-repellent. Incl.: Marking disc (double sided gas and water) as well as a universal bell adapter.

Telescopic Spindle Extension T3 for ball valves with square connection. A two-piece hot-dip galvanised steel rod accord. to DIN EN 10240 (alternatively in stainless steel), square cap (top adapter) made of GJS400-15, galvanised accord. to DIN EN 12329 and DIN 50961 (alternatively in stainless steel AISI 304) with connection drillings accord. to GW336. Suitable for operating key DIN 3223 C or E (DN25-50). Toolles assembly of the spindle extension with a stainless steel clip-pin. Connection pins made of stainless steel 1.4301. Transport security of the rod minimum of 150N. Self-locking in every adjustable position with a PE sealing collar on the steel tube. Torques accord. to GW336. Three-piece PE protection tube system with an additional corrugated protection tube, bonded centring cap and universal round bell accord. to GW336. Completely dirt-proof and water-repellent. Incl.: Integrated position indicator „1/4 turns“.

Non-contacting multi-channel speed sensor with square wave output signal, stainless steel threaded tube, difference-hall-effect or inductive magnetic principle. Due to its design and its approvals especially suitable for shipbuilding industry. Robust housing: IP66/68 Excellent vibration and shock resistance Variable lengths, threads and electrical connections Optionally with two galvanically isolated output signals Optionally with additional status signal (e. g. direction of rotation detection) Approvals: ABS, BV, DNV-GL, LR

Features Differential pressure transmitter with metallic diaphragm High-resolution graphic display with backlight Intuitive 4-button operation Comprehensive parameterising, simulation and diagnostic functions Quick access to device data Development according to SIL2 Nominal range 0.25 bar to 16 bar Turndown up to 100:1 Measuring rate up to 100 Hz Accuracy 0.1 % Output signal 4…20 mA with HART® protocol Configuration memory Digital communication via PDM, FDT/DTM, 375/475 Field Communicator Output functions: linear, invers, square root, table function Stainless steel case in sturdy design, degree of protection IP 65/67 Media temperature -40…100 °C Wetted parts stainless steel Options Various approvals/Certificates Removable display and control unit Degree of protection IP 69K Front cover of stainless steel with window of non splintering glass

Stainless steel square, other grades available on request, hot rolled. Technical delivery conditions according to DIN EN 10088-3:2014. Design according to DIN EN 10059. Acceptance test certificates according to DIN EN 10204/3.1 are issued for the manufactured sections. The regular minimum order quantity is 500 kg. We pack the finished profiles in bundles weighing approx. 500 kg. Each bundle is provided with two labels giving information on dimensions, material number, heat number, weight, manufacturer's mark and the responsible mill expert. Fields of application: — Mechanical engineering — power plants — Chemical industry — Petrochemical industry — Food industry/agricultural technology — Aviation industry — Marine equipment — Medicine and pharmaceuticals — Defense technology — Decorative purposes/ kitchen equipment — Construction industry Special properties: — Non-magnetic materials — Materials for low temperatures

Stainless steel square, other grades availabe on request, cold-drawn. Technical delivery conditions according DIN EN 10088-3:2014. Execution as per DIN EN 10278:1999, tolerance h11. The produced bars are delivered with mill test certificates according to DIN EN 10204/3.1. Available in random lengths of 3000-3200 mm. *The regular minimum order quantity is 500 kg. The finished bars are packed in bundles of approx.500 kg. Each bundle carries two labels, providing information about dimensions, grade, heat number, weight, manufacturer's code and works inspector. Other dimensions on request. Application areas: • Mechanical engineering • Chemical industry • Petrochemical industry • Food industry / agricultural technology • Transportation • Decorative guidelines / kitchen furnishings • Construction industry Special features: • Non-magnetic materials