Results for
OPTIGRÜN INTERNATIONAL AG
Germany
Perforated gravel retainer L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane via aluminium connection elements. For roof pitches of up to 5°.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Drainage Gutters and Terrace Grids are used for draining surface water from roof outlets, draining water-bearing layers, draining driving rain from the facade, as collection channels for draining green roof areas and as branch canals between downpipes and roof outlets.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Perforated Edge Trim L-section as border of a green roof. Fixed to the roof membrane. For roof pitches of up to 5°.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
L-section for separation of gravel and substrate. Simple installation due to click-connection system. Installed on protection membrane, drainage elements or filter fleeces; connectable to water conduit systems. For roof pitches of up to 5°.
Request for a quoteBÖLLINGHAUS STEEL GMBH
Germany
Stainless steel types: Austenitic Duples Ferritic Martensitic Nickel alloys Titanium
Request for a quoteBÖLLINGHAUS STEEL GMBH
Germany
Stainless steel, flat, grades availabe on request, hot-rolled. Technical delivery conditions according to DIN EN 10088-3:2014. Execution as per DIN EN 10058. The produced bars are delivered with mill test certificates according to DIN EN 10204/3.1. Available in random lengths of 4000-6500 mm. *The regular minimum order quantity is 500 kg. The finished bars are packed in bundles of approx. 500 kg. Each bundle carries two labels, providing information about dimensions, grade, heat number, weight, manufacturer's code and works inspector. Other dimensions on request. Application areas: • Mechanical engineering • Power plants • Chemical industry • Petrochemical industry • Food industry / agricultural technology • Aerospace • Ship building • Medicine and pharmaceutical • Decorative purposes / kitchen equipment • Construction industry Special features: • Non-magnetic materials • Materials for low temperatures
Request for a quoteBÖLLINGHAUS STEEL GMBH
Germany
Stainless steel square, other grades availabe on request, cold-drawn. Technical delivery conditions according DIN EN 10088-3:2014. Execution as per DIN EN 10278:1999, tolerance h11. The produced bars are delivered with mill test certificates according to DIN EN 10204/3.1. Available in random lengths of 3000-3200 mm. *The regular minimum order quantity is 500 kg. The finished bars are packed in bundles of approx.500 kg. Each bundle carries two labels, providing information about dimensions, grade, heat number, weight, manufacturer's code and works inspector. Other dimensions on request. Application areas: • Mechanical engineering • Chemical industry • Petrochemical industry • Food industry / agricultural technology • Transportation • Decorative guidelines / kitchen furnishings • Construction industry Special features: • Non-magnetic materials
Request for a quoteKULLEN-KOTI GMBH
Germany
Our sealing brushes are available in many forms and with a wide variety of profiles. These profiles can also be used as mounting flanges. The special types consist of 11 types of sealing brushes which we can produce in a large range of variations on your request. You can choose: - All fill types, e.g. natural bristles and hair, plant fibres, synthetic filaments and wires.- The quality of the backing material, e.g. galvanized steel, stainless steel (1.4301; 1.4571) or brass.- The trim height (BH) (free bristle length- The overall length from a few centimeters to the maximum length which can be transported. We also can supply all sealing brush types with fixing holes in the holding flanges, e.g. 22 available sizes of round holes and 13 sizes of elongated holes. Don't hesitate to ask us for other dimensions of fixing holes, too.
Request for a quoteGLT BEARINGS GMBH
Germany
Wrapped composite sliding bearing steel / Special PTFE coated Maintenance-free dry sliding bearing | DIN 1494 / ISO 3547 TEF-MET/P is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, it is very well suited for lubricated applications (e.g. hydraulic oil lubrication). For technical details, please visit the product page on our website!
Request for a quoteGSW SCHWABE AG
Germany
direct mounting to our Gripper Feeds, series ZVTMB or similar products with mounting bracket very costeffective flattening of the coil set best results through adjustment of both top straightening rolls rolls made of special steel and hardened and ground
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
As mechanical connection elements, weld-on sockets are used wherever screw connections for measuring points need to be created quickly, reliably and economically. Along with standard weld-on sockets which is supplied in 1.4301 material, on request other materials such as special steels and alloys can also be used.
Request for a quoteGSW SCHWABE AG
Germany
Shock dampening for low operating noise levels Sturdy, warpresistant design with heavy doublepost guides With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control Mounting bracket
Request for a quoteGSW SCHWABE AG
Germany
Shock dampening for low operating noise levels Sturdy, warpresistant design with heavy doublepost guides With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control Mounting bracket
Request for a quoteGSW SCHWABE AG
Germany
With 2,5 degree cutting angle for clean, burrfree edges With adjustable blade clearance for a most precise cut at any thickness Very precise blades made of special steel High operating safety through material guide at entrance and protective cover Springactuated hold down clamp (from 250 mm stock width) Top/bottom dead center control to monitor blade position Counter control
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
CSN®cartridge type heating elements and bath heaters are eminently suitable for direct heating and warming of liquids of all kinds. Corresponding to the nature of the different media protective coverings of steel, various special steel types or porcelain can be selected. The electric heating inserts of CSN®cartridge type heating elements may be installed or dismounted without the necessity of draining the liquids from the container. The CSN®cartridge type heating elements and bath heaters are manufactured for nominal voltages from 110 up to 690 volts D.C. and A.C. In the case of higher heating capacities 3 or more elements each, being individually divisible by the factor 3 can be star or delta connected to 230 and 400 volts A.C. threephase mains. At 12 kW and a related length the elements are fabricated for 400 volts A.C. threephase delta connections. In any case the desired voltage and type of current has to be stated.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
GRÜNING & LOSKE GMBH
Germany
Short description: The solid nozzle for everyday use The sewer nozzle is best suitable for a heavy everyday operation. With its 10 to 12 nozzle inserts and two different jet angles it is primarily used for the all-round cleaning of pipes up to 800 mm in diameter. The sewer nozzle has patented fluid mechanics (patent no.: DE 19516780) and is made of highly wear-resistant special steel. This universal nozzle of heavy construction is characterized by high efficiency and absolute reliability. It is an efficient and low-cost alternative to the conventional standard products.
Request for a quoteGSW SCHWABE AG
Germany
shock dampening for low operating noise levels absolutely sturdy and warpresistant body design with heavy doublepost guides to smoothly cut even toughest materials with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control
Request for a quoteGSW SCHWABE AG
Germany
shock dampening for low operating noise levels thanks to a heavy overall frame and the sturdy, warpresistant design with heavy doublepost guides even toughest materials can be cut smoothly with adjustable blade clearance for a most precise cut at any thickness very precise blades made of special steel high operating safety through material guide at entrance and protective cover springactuated hold down clamp (from 250 mm stock width) top/bottom dead center control to monitor blade position counter control mounting bracket hydraulic power units in different sizes electrical control
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Special Teflon hoses with stainless steel sheathing for high pressure applications such as brakes and clutches.
Request for a quoteOTTO EICHHOFF GMBH & CO. KG
Germany
Turned parts Long turned partes, small turned parts Turned, milled and grinded parts Thread inserts in brass, steel and stainless steel Possible materials: Alloy AlCuMgPb, AlZn5,5MgCu etc. Brass CuZn39Pb3, CuZn40Pb2 etc. Stainless steel 1.4301, 1.4305, 1.4571, 1.4401, 1.4101 etc. Steel Machining steel, St52, St37, C45, etc. Special steels Titan, Hastelloy, Copper, Bronze etc. Surface treatments may be done as follows: Galvanizing, nickel, brown, hot-dip galvanizing, phosphating, anodizing, chrome plating, painting, powder coating, plasma coating, sandblasting, Tuflok coatings. All common surfaces as VDA standard are possible (zinc-nickel, zinc flake). Heat treatments such as Plasma / gas nitriding, carbonitriding, hardening, carburizing, vacuum hardening, tempering etc.
Request for a quotePIERON GMBH
Germany
Dimensions Depending on the required stamp power (material strength, material thickness, and part shape) Material All spring materials in soft and hard condition as well as quality steels with lower strengths and aluminum alloy and also special alloy Stainless steel up to 1900 N/m² Rubber-coated strip material Hardening Through external services Coating Fully or partly coated strip material In-house phosphating In-house stove-enameling Additional coatings through external services Specialities Fully automated manufacturing of components and mounting Fully automated welding Contact springs with contact rivet Bushes clinched, welded, and open Special processing like thread cutting, screw mounting, and rivets feasible Special packaging in blister pack, trays or magazines Rapid prototyping
Request for a quoteGUMMIWARENFABRIK EMIL SIMON GMBH & CO. KG
Germany
For use as an expansion joint in suction and pressure lines. As a suction hose on suction dredgers with narrow bending radiuses. To handle fine and coarse-grained materials. Also suitable for tough transport applications of dry materials in the mining field. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays Concealed steel rings UV, ozone and weather-resistant, abrasion-resistant cover Interior smooth, exterior deep corrugated Cut to length with built-in flanges. Other versions and dimensions on request.
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...
Request for a quoteEZM EDELSTAHLZIEHEREI MARK GMBH
Germany
Special customer requirements occasioned us to produce selected bright steel specialities, such as antifriction bearing steel / ball bearing steel, which we also refer to as precision bright steel. The characteristic features of these antifriction bearing steels/ball bearing steels, etc. include the producible materials, attainable tolerances, achievable surfaces, available bar lengths, and obtainable strengths. Metering rods Ejector pins Fittings Ball bearings/Overrunning clutches >> Current alloy surcharges >> Current scarp surcharges VERSIONS AND FORMS SUPPLIED Drawing From 2.0 mm to 28.0 mm round, tolerance zone IT 9 Min. bar length 2,000 mm Max. bar length 5,000 mm (2.0 mm to 6.0 mm round) Max. bar length 7,000 mm (6.0 mm to 16.0 mm round) Max. bar length 9,000 mm (> 16.0 mm round and on request) Length tolerance ± 25.0 mm Grinding From 0.5 mm to 32.0 mm round, tolerance zone IT 6 (Rm up to 1,600 N/mm² for bright steel for standard parts) > 32.0 mm to 60.0 mm...
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
This clamp made of galvanized steel is a special clamp for connecting medium and heavy-duty hoses to connectors on mobile and stationary units. Bandwidth approx. 20-25 mm. Band thickness approx. 1.0 – 1.8 mm
Request for a quoteResults for
Special steels - Import exportNumber of results
95 ProductsCountries
Company type
Category