Results for
SCHWEIZER GMBH & CO. KG
Germany
Special thread reducers in aluminum or steel.
Request for a quoteGSW SCHWABE AG
Germany
high accuracy for feed repeat of +/ 0,05 mm high clamping force to serve even large material crosssections serving a wide variety of materials, such as coil, band, bar or profile stocks or even wires, cardboards, papers and fabrics operation in push or pull mode or combined in pushpull mode special air cylinder design for reduced air consumption feed length adjustment via finethreaded spindle
Request for a quoteSAMSYS GMBH
Germany
The OnRobot force-torque sensor provides accurate force and torque measurement along all 6 axes. This gives you precise control during difficult assembly, polishing, grinding or deburring. In addition, the HEX software offers path recording, force control and special functions for insertion. This reduces the integration time for your production line. Our sensors are suitable for most of the industrial robot arms currently in use. Common applications are polishing, grinding, deburring and assembly. They can also be used for teach-in applications and collision detection. Currently available models: HEX-E – High precision, HEX-H – Low deformation, HEX-E QC, HEX-H QC Seamless integration into the robot of your choice. For example Universal Robots, Nachi, Doosan, Yaskawa, TM Robot, Kawasaki, ABB, Kuka, Hanwha, Fanuc.
Request for a quoteBDSENSORS GMBH
Germany
The industrial pressure transmitter DMP 336 was especially developed for hydrogen applications and can also be used with other technical gases (e.g. oxygen). This is achieved by using an alloy based on 316L which prevents hydrogen embrittlement of the media-wetted parts. Level of hydrocarbon and particle contamination are significantly reduced by special treatment during production and cleaning. An IS- version is optionally available for explosion-protected applications zone 0 / 20. Features: — nominal pressure: 0 ... 16 up to 0 .... 1000 bar — accuracy: 0,5 % FSO — wetted parts in special stainless-steel — insensitive to pressure peaks — high overpressure capability — oil and grease free according to ISO 15001 (e.g. for oxygen applications) Optional Features — IS-version Ex ia = intrinsically safe for gases and dust
Request for a quoteNOREVO GMBH
Germany
Our low bac honey (low bacteria = germ-reduced) has been specially developed for microbiologically demanding and sensitive products. Our internally developed thermal process reduces germs by heating the honey.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
PROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Combination Braid of ePTFE with incorporated Graphite and Polyimid Fiber with Run-In Lubricant Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Characteristics Combination braid with extended pH-range of 0 - 12 Improved heat conductivity and increased mechanical strength due to special material combination Reduced wear of the shaft surface. Recommended shaft surface hardness: HRC 35; Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 250 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 0 - 12 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C max. pressure centrifugal pumps: 20 bar Main application Centrifugal pumps Mixer Kneader Agitators Refiner Suitable for Chemical industry Chemical Sewage Universal use Form of delivery This packing can be manufactured from 4 to 40 mm square as well as in intermediate, inch sizes and...
Request for a quotePROPACK DICHTUNGEN UND PACKUNGEN AG
Germany
Combination braid of ePTFE Yarn incorporated with Graphite, Meta-Aramid Fibers and special impregnation Practical useful application data: max. temperature: +200 °C Characteristics Excellent Standardisation possibilities High Cross Sectional density, yet still elastic and flexible Suitable for use with hardening and crystallizing products Displays reduced wear through special running track reinforcement Unique formulation impregnation improves flexibility, ensures packing will not harden Provides excellent chemical resistance Recommended shaft surface hardness: HRC 35 Operating range Pressure [p max]: 25 bar, Velocity [v max]: 20 m/s Pressure [p max]: 150 bar, Velocity [v max]: 2 m/s Pressure [p max]: 150 bar Temperature: t = -100… +280 °C pH: 1 - 13 Density: 1.50 g/cm³ Practical useful application data: max. temperature: +200 °C Main application Centrifugal pumps Mixer Agitators Fittings Filter Suitable for Pulp and paper industry Chemical industry Form of delivery This...
Request for a quoteSCHAKE GMBH
Germany
safety factor: 7:1, material 100 % polyester with special reinforcement – reduced elongation. Easy to handle, light weight and insensitive to heat, cold or moisture; temperature range: -40°C bis +100°C. For safe lifting of load
Request for a quotePOLYPLAST MÜLLER GMBH
Germany
PolyPlus® LD 1925 ZZ is a versatile, stabilized, and extremely effective purge compound on an LDPE basis specially developed to reduce the cleaning times of extrusion and injection molding plants to a minimum. It should be used before dismantling and cleaning the extruder, during planned and unforeseen extruder downtimes and during material and colour changes. PolyPlus® LD 1925 ZZ contains surfactants and abrasive agents with mechanical and chemical cleaning properties to remove degraded polymer and pigments from the extruder and from the die. The use of PolyPlus® LD 1925 ZZ immediately before the cleaning process has shown that downtimes can be reduced my more than 50%! This also applies for product and/or colour changes.
Request for a quoteHANS KÖRBER GMBH
Germany
Our fittings include both concentric and eccentric reducers, tees as standardised parts and special fittings according to drawings. Reducers in various lengths can be supplied, as can thick-walled tees or unusual diameter combinations.
Request for a quoteHANS KÖRBER GMBH
Germany
Our fittings include both concentric and eccentric reducers, tees as standardised parts and special fittings according to drawings. Reducers in various lengths can be supplied, as can thick-walled tees or unusual diameter combinations.
Request for a quoteTOPCOD DEUTSCHLAND GMBH & CO. KG
Germany
When containers are shipped and stored, they are often exposed to extreme climatic conditions. Especially on the high seas, there are very strong temperature fluctuations. This causes condensation ("container rain") to form inside the container, which can damage your goods. To prevent this, we use special desiccant chains that reduce the humidity in the container and thus protect the goods from damage, mold and corrosion. Universal application possibilities Costeffective The operating principle of our container desiccant is based on a mix of calcium chloride (CaCl2) and starch. This mix of materials binds the resulting moisture and prevents it from being released again thanks to the leakproof nonwoven fabric. Automotive parts Metal parts Electronics Grocery area Clothing and leather products Furniture Groceries Cardboard boxes and wood products Medical products
Request for a quoteRÜHL FEUERLÖSCHMITTEL GMBH
Germany
Polyester resins (UP resins) form the basis of our product range in the glass fibre reinforced plastic systems business area – with a wide variety of applications. They range from thixotrope standard systems for manual lamination and fibre spraying to low-viscosity standard formulations for polymer concrete and sanitary applications to numerous special formulations for specific requirements. With a broad spectrum of properties and applications, our UP resin systems are suitable for products in a wide variety of industries. Typical properties Dense matrix / composite of approximately 1.1 g/cm³ / 1.5–1.7 g/cm³ Fibre content 25-50 % of total weight Moulded part mass per unit area of 4500-8000 g/m² Flexural modulus of elasticity 5000–25,000 MPa (with reinforcing mesh) Bending resistance of 130–260 MPa (with reinforcing mesh) Impact resistance of 45–95 KJ/m² Reinforcing materials: Continuous or cut glass fibre mats, fleece Mesh Non-crimp fabrics Special formulations and versions Styrene-reduced, environmentally friendly formulations Low-viscosity injection resins with reduced exothermic peak Formulations for the pultrusion process Systems with high chemical and hydrolysis resistance DIN 1140 versions with special mechanical values and dimensional stability under heat greater than 100 °C (HDT > 100 °C) Resins with good adhesion for combination with PVC Resin systems with shipping industry approval: Det Norske Veritas/Lloyd’s Register of Shipping/Germanic Lloyd Coordination with gel coat/top coat for surface refinement Flame protection formulations Electrical industry: UL 94 V0 Rail vehicle construction: DIN 5510 (S4, SR2, ST2)
Request for a quoteResults for
Special reducers - Import exportNumber of results
14 ProductsCountries
Company type
Category