Special oils - Import export

Light, synthetic oil with extremely powerful release for minimal-/micro spraying Alloy Al, Mg Properties and Advantages • film-forming ability at temperatures exceeding 400 °C • release agent for minimal-/micro spraying • improved viscosity for even better atomizing • start up of new dies • forms release layer lasting multiple cycles • reduces metallization in problem areas • replaces traditional pastes (e.g. silver- and acid containing pastes) • significantly reduced smoke development • 25 % more active substance compared to Isolat® UP 78

INOX® Nano Line car shampoo is a highly concentrated, gentle special shampoo with orange oil extracts and integrated drying aid through nanotechnology.

Oil-based care products are particularly suitable for treating natural, untreated products. Special teak wood, furniture care or flooring oils prevent the respective woods from drying out and protect against weather influences and UV rays. Teak oils: Back to the natural colouring of the wood Teak is extremely sensitive to light. After a few months the natural colouring of the wood begins to fade due to the effects of light, moisture and oxygen. Special oils help to eliminate greying and regain the natural colouring. Furniture care oils: resistance for wood Furniture care oils make woods more resistant, diffusible and antistatic. Furthermore, these oils can deepen and revitalise the natural structure and colouring of the wood. Floor oils: protection and care of wooden floors Floor oils particularly make softwood floors and cork less sensitive to dirt, abrasion and water. The colour of the wood can also be enhanced by using these oils.

Self-Compensating, Stainless Steel Energy capacity 1,870 Nm/cycle Stroke 48.6 mm The latest damper technology in stainless steel: The self-compensating industrial shock absorbers MC33 to MC64 from the tried-and-tested and popular MAGNUM series is also available with all outer components made from stainless steel (material 1.4404). They are filled in the factory with special oil, which meets the permit conditions (NSF-H1) for the food industry. Just like the standard product family, the MAGNUM stainless steel models are distinguished by their robust, modern sealing technology, high energy absorption in a compact design, integrated positive stop and a wide damping range. Equipped with a PU head, they are available in thread sizes M33x1.5 to M64x2 with damping strokes up to 100 mm.

Self-Compensating, Stainless Steel Energy capacity 370 Nm/cycle Stroke 23.1 mm The latest damper technology in stainless steel: The self-compensating industrial shock absorbers MC33 to MC64 from the tried-and-tested and popular MAGNUM series is also available with all outer components made from stainless steel (material 1.4404). They are filled in the factory with special oil, which meets the permit conditions (NSF-H1) for the food industry. Just like the standard product family, the MAGNUM stainless steel models are distinguished by their robust, modern sealing technology, high energy absorption in a compact design, integrated positive stop and a wide damping range. Equipped with a PU head, they are available in thread sizes M33x1.5 to M64x2 with damping strokes up to 100 mm.

Self-Compensating, Stainless Steel Energy capacity 170 Nm/cycle Stroke 23.2 mm The latest damper technology in stainless steel: The self-compensating industrial shock absorbers MC33 to MC64 from the tried-and-tested and popular MAGNUM series is also available with all outer components made from stainless steel (material 1.4404). They are filled in the factory with special oil, which meets the permit conditions (NSF-H1) for the food industry. Just like the standard product family, the MAGNUM stainless steel models are distinguished by their robust, modern sealing technology, high energy absorption in a compact design, integrated positive stop and a wide damping range. Equipped with a PU head, they are available in thread sizes M33x1.5 to M64x2 with damping strokes up to 100 mm.

Self-Compensating, Stainless Steel, Rolling Diaphragm Technology Energy capacity 136 Nm/cycle Stroke 25.4 mm Brilliant in every respect: These high performance miniature shock absorbers in stainless steel are based on the MC150 to MC600 product family and its proven damping technology. This means that these special absorbers offer all of the benefits of the MC standard units such as the proven ACE rolling diaphragm technology for maximum service life and direct installation in a pressure chamber with up to approx. 7 bar. Thanks to perfectly progressive maximum energy absorption and effective weight potential, their use is augmented even further by the outer body and a complete range of accessories made of stainless steel (material 1.4404). Miniature shock absorbers made of stainless steel are mainly used in medical and electro-technology, but also in shipbuilding, packaging and chemicals industry and in the food processing. For the latter, they are filled with a special oil in...

Self-Compensating, Stainless Steel, Rolling Diaphragm Technology Energy capacity 41 Nm/cycle Stroke 12.5 mm Brilliant in every respect: These high performance miniature shock absorbers in stainless steel are based on the MC150 to MC600 product family and its proven damping technology. This means that these special absorbers offer all of the benefits of the MC standard units such as the proven ACE rolling diaphragm technology for maximum service life and direct installation in a pressure chamber with up to approx. 7 bar. Thanks to perfectly progressive maximum energy absorption and effective weight potential, their use is augmented even further by the outer body and a complete range of accessories made of stainless steel (material 1.4404). Miniature shock absorbers made of stainless steel are mainly used in medical and electro-technology, but also in shipbuilding, packaging and chemicals industry and in the food processing. For the latter, they are filled with a special oil in...

Self-Compensating, Stainless Steel, Rolling Diaphragm Technology Energy capacity 20 Nm/cycle Stroke 12.5 mm Brilliant in every respect: These high performance miniature shock absorbers in stainless steel are based on the MC150 to MC600 product family and its proven damping technology. This means that these special absorbers offer all of the benefits of the MC standard units such as the proven ACE rolling diaphragm technology for maximum service life and direct installation in a pressure chamber with up to approx. 7 bar. Thanks to perfectly progressive maximum energy absorption and effective weight potential, their use is augmented even further by the outer body and a complete range of accessories made of stainless steel (material 1.4404). Miniature shock absorbers made of stainless steel are mainly used in medical and electro-technology, but also in shipbuilding, packaging and chemicals industry and in the food processing. For the latter, they are filled with a special oil in...

As a contract manufacturer and contract filler, we offer our customers a large and varied range of industrial care products. From wax release agents and basic cleaning agents to special cleaning and cold cleaning agents, floor oils or Chromoblitz-emulsions and sweeping shavings: This product variety of industrial care products meets almost every customer’s wish and need. In addition, what may have existed up to now only as an idea of the customer can be specially developed by the knowledge and innovative strengths of Wachsfabrik Segeberg GmbH. Basic cleaning agents: Flexible surfactants Basic cleaning agents are based on surfactants, which are either water- or solvent-based, depending on the desired application. These industrial care products have a degreasing and dewaxing effect. Floor oils: Impregnation of industrial floors Special floor oils are used to make industrial floors less sensitive to dust and dirt and to impregnate them.

Immersion cylinder for sampling crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants in Explosion Categories IIA, IIB and IIC. Completely made from non-spark producing materials, nickel-plated. Dipping containers are used in various areas to collect liquids for sampling. Bürkle produces the most comprehensive collection of dipping containers by a long way, the right product for every use as it were. Bürkle offers dipping bottles and immersion cylinders for sediments, for the area of environmental issues, for chemically aggressive products, for petrochemistry, for the ex protection area etc. The dipping bottles for the Ex protection area are made of nickel-plated brass, therefore they do not oxidise.

A subsequent further development complementary of proven hydraulic lift platforms from LAWECO. Particularly in sensitive areas, such as the automotive or chemical industry, they offer a whole series of convincing advantages: Without hydraulic oil A very special and modern alternative to a hydraulic lift platform. Precision down to a millimetre Heights moved to with millimetre precision are maintained one hundred percent. Minimum maintenance time and cost The use of low-wear components reduces maintenance time and costs to a minimum.

The Argan tree (Argania spinosa) is one of the oldest trees in the world and grows only in south-western Morocco. Argan oil, one of the most precious and richest vegetable oils, is extensivly processed from the seeds of the Argan tree in the traditional Berber way. What makes the Argan oil so special is its high content of essential, biological active unsaturated fatty acids of around 80%. The proportion of linoleic acid is significantly higher than in olive oil. Each capsule contains 500 mg of pure argan oil from controlled biological cultivation.

• For fitting snap rings and retainer rings without finger holes for shaft retainers of any description • With opening spring • Made of tool steel, forged, oil-hardened

• For straight cuts • Cutting edge hardness 57-59 HRC • Cutting edges inductively hardened • Re-adjustable screw-joint • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For loosening, cutting and attaching balance weights • For opening and pressing together the retaining springs • With cutting edge for separating the balance weights • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• For smooth cutting off of plastic moulded parts or soft materials such as lead • Cutting edge without side face • With adjustable cutting edge stop by means of adjustment screw (only model 133FG) • With opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For cutting flat cables without squeezing • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Re-adjustable screw-joint • Handles coated with plastic • Ergonomic handle position and shape for optimum power transmission • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• Cutting edges inductively hardened • Precision cutting edge for piano wire (D2 quality) • Precision cutting edge for bolts, nails, rivets, hard wires and similar materials • Cutting edge hardness approx 62 HRC • Power transmission with optimum leverage for easy and effortless work • Tremendous cutting performance, up to 50 % power saving compared with conventional power side cutters • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

• Pliers for electrical installation • 4 Functions: cutting - stripping - crimping - bending • With stripping function for single and multi-stranded conductors with 1.5 mm² and 2.5 mm² conductor cross-section • For shortening screws M 3.5 • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Power transmission with optimum leverage for easy and effortless work • Handles with ergonomically shaped SoftGripp multi-component safety sleeves according to DIN EN/IEC 60900 • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of special tool steel, forged, oil-hardened

• For stripping and cutting copper and aluminium cable • Improved cutting geometry for simple cutting and higher operating times • Ratchet-shaped clamping of the cable ensures crimp-free cutting • Precision cutting edge for a smooth and clean cut without any burrs • Not suitable for steel wire, aluminium alloys and hard-drawn copper conductors • Re-adjustable screw-joint • Handles coated with plastic • Professional design for easy handling under permanent load • Made of special tool steel, forged, oil-hardened

• Most popular shape for assembly work, trimming printed circuit boards, also for radio and telephone work • Cutting edges inductively hardened • Precision cutting edge for the finest wires • Tight-fit joint movement • With box-joint and opening spring • Handles coated with plastic • Made of special tool steel, forged, oil-hardened

— Three-pass boiler for a small to medium steam demand of 200 to 2,000 kg/h at up to 16 bar — Lower space requirement for easy installation — High level of efficiency due to the integrated economizer — Versatile design for use with different fuel types and as a multi-fuel firing unit (oil, gas, biogas, bio-oil, hydrogen, special fuels) — Intuitive touchscreen operation and PLC control — Easy wiring on site thanks to plug-in connections