Special metal - Import export

Continuous-process shredding of large quantities and volumes: that’s the world of the ERDWICH two-shaft shredder. The secret of its success is our ERDWICH rotor-blade cutting principle, honed to perfection over decades. Want to know more? The material is taken up by the barbed blade, pulled unceremoniously into the machine and then shredded between the blades on the two opposing shafts. Whatever the material – e.g. special waste, WEEE, metal swarf, electrical waste or bulky items – even hard to shred, large-volume materials stand no chance against these two mighty cutter shafts. Perfect results are even guaranteed from fibrous, moist, heat-sensitive, elastic and rubbery materials. And, thanks to its mode of operation as a slow-speed piece of equipment, the ERDWICH two-shaft shredder also features quiet and largely dust-free operation. You can rely on the power and the technology of the ERDWICH two-shaft shredder. Continuous-process shredding of large quantities and volumes:...

The versatility and and capability of LAWECO products is most notably shown in coil processing systems. In the infeed and outfeed areas, coil lifting carriages primarily handle the coil. In conjunction with various rack systems even complete solutions can be realised. In the stack areas, stationary and movable scissor lift platforms provide the required handling. Here, it is also our goal to respond to the wishes and requirements of our customers and to provide individual solutions. Load bearing capacity up to 150 t Movable or stationary With simple, tandem or double scissor With materials handling technology or special constructions Mechanical coupling facility With powerful switching hydraulics or control valve technology With weighing device With positioning system

Cutlery- and tray-distribution trolley AGW. Design: Frame structure made of anodized special light metal-profiles, side walls melamine resin laminated, panels completely surrounded by U-profile, on top cutlery container with napkin dispenser for 300 napkins. Mounted on 4 corrosion protected, ball bearing castors, 2 of them lock able.

For trapezial trays. Design: Frame structure made of anodized special light-metal-profiles, side walls made of melamine resin laminated, completely bordered with U-profile. Tray supports made of angular plastic U-profile. Tray trolleys with 1 or 2 racks. Mounted on 4 corrosion protected, ball bearing castors with distance holding rolls, 2 of them lockable.

Design: Frame structure made of anodized special light metal-profiles, side walls and separating walls made of melamin resin laminated panels, completely surrounded by U-profile.Rear- and front side open. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, 2 of them lockable. With acrylic glass doors (completely faced with melamine panels).

Design: Frame structure made of anodized special light-metal-profiles, without side panels. Tray support made of chrome nickel steel 18/10. Mounted on 4 corrosion protected,ball bearing castors with distance holding rolls, 2 of them lockable.

Spoiler for the M5000 tram in Manchester, UK Bombardier designed the M5000 tram as a highfloor tram specially for use in Manchester. The spoiler consists of a solid stainless steel frame with a gluedon GRP profile. The profile was milled on modern CNC machines at TC, glued to the frame, primed and painted with a special 2KPUR metallic paint. It is manufactured in different lengths and designs. It has fire protection in accordance with BS 6853. For new projects, we meet fire protection requirements in accordance with EN 45545.

Frame structure made of anodized special light metal-profiles. 1 compartment, side walls made of melamine resin laminated panels. Tray supports made of chromium plated tubular material. Mounted on 4 corrosion protected, ball bearing castors with distance holding bumpers, diam. 125 mm, two of them lockable.

Roller brushes Type 422 with sub-bodies e. g. tubular cores with journals are defined as having a body length longer than 100 mm (for brushes shorter than 100 mm, see "Circular brushes"). The brush cores (plastic or wooden cores with mechanically anchored bundle of fill material) either are mounted on steel shafts (WK1) or Steel /stainless steel tabular cores with journals (WK1 resp. WK4) for strength and rigidity. The comprehensive range of dimensions, core materials, fill materials and fill configurations demonstrates the versability of Kullen-Koti again and again. We would be pleased to supply you on request with details of special designs with wood or metal bodies. In case of brushes with non-cylindrical cores, we would like to ask you to send us a drawing or simply discuss your requirements with our technical consultant. Fill material densities: - High fill density EA1, - normal fill density EA2, - low fill density EA3. Fill configurations: In addition to a full fill...

The KEIPER belt series RAPID conveyor and process belts is available in polyester, cotton or blended fabrics, with special coatings such as neoprene, silicone, non-woven fabric and many more, in a wide range of colors suitable for the specific application, and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Keiper’s series of UNITRANS conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Keiper’s series of STABILOFLEX conveyor and process belts is available in 1-/ 2- or 3-layered polyester fabrics, with a PVC coating or PVC interlayer, and in a variety of colors depending on the application and different surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approval and compliance with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitability for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

KEIPER conveyor belts are made of fully synthetic polyester or blended fabrics and can be adapted for a specific purpose by means of different designs as well as appropriate coatings and surface structures. The wide range of possible materials and designs takes into account such varied requirements as: High entrainment adhesion or low adhesion (accumulation mode) FDA/USDA approved and in conformity with EU Directive 2007/19/EC Colors white, petrol, black, green and special colors Anti-static designs and suitable for use in metal detectors Special resistance against wear and chemicals High and low temperatures Stress-strain behavior and tensile strength Drum diameter (e.g. blade edges) Hence, the conveyor belts always are designed for the intended application.

Baking varnish is a special joining technology for sheet metal packages. After the individual lamellas have been cut, electrical steel with a baking varnish coating is baked into a sheet metal package in a two-stage temperature step. The result is a full-surface, solid connection between the individual sheets with complete insulation. Sheet metal packages manufactured in this way have high precision and perfect magnetic properties. Advantages of the Backlack process: The Backlack process offers several advantages over alternative packaging processes, which we will discuss in detail below. Precision – Sheets coated with baking varnish are baked over the entire surface. This means that even delicate slats can be assembled precisely.

Novelis ff2 pre-painted aluminum with a 2 mm thickness is developed specially for building facade cladding in ventilated and non-ventilated construction. Coil-coated with high-quality PVdF paint, this pre-painted aluminum has a flawless, brilliant surface with a variety of plain, metallic and special colors available.

SL 800 provides optimal protection against wear and is suitable industry-wide. It contains premium active ingredients with long- lasting effects. The special lubricant protects all metal friction surfaces that are exposed to extreme temperatures and is there- fore suitable for use at temperatures of up to around 800ºC (to around 200ºC with dry lubrication) and will withstand cold down to around -35ºC. SL 800 prevents corrosion, oxidation, freezing, galling and wear. Adherent and wear-resistant Pressure-resistant Water-, salt water- and solvent vapour-proof CFC- and silicone-free Free from hard metals (e.g. lead, nickel, cadmium, copper) Makes disassembly easier, even after a long period of use Fields of application Brake systems, exhaust pipe fittings, spark plugs, gears, chains, channels and gearboxes, screw-, bolt-, plug- and pipe-connections, kettle- and oven-fittings. Usage Shake can vigorously for around 30 seconds until the mixing ball can be heard, then just spray SL 800...

The overall harmonious effect of your metal products is maintained with Schmale clasps. Our clasps for metal boxes are specially designed for the fastening requirements of this type of packaging Our clasps and clasping systems are produced in various designs and ways of operating; they also offer a number of possibilities for customising and for different ways of fastening. Many models of clasps can be customised with either your or your customer‘s logo. A wide range of material and surface options are available Taking into account the material properties and wall thicknesses of your metal packaging, we offer you fastening machines which are specially designed for our clasping system and which ensure highly rationalised processing, optimising your production process. Should you have additional questions or special requirements please contact us » Clasps for fastening to metal The overall harmonious effect of your metal products is maintained with...

pressure equipment: valves, boiler systems, piping PED 2014/68/EU, AD 2000-W0, ASME/ASTM, CNIM, Alstom, MHPS nuclear power/ atomic energy and plant construction KTA3201.1, KTA1401, AVS D 100/50, Siemens, EDF/Areva/RCC-M naval architecture/ shipbuilding and offshore/ ocean engineering American Bureau of Shipping (ABS) Bureau Veritas (BV) Det Norske Veritas (DNV) Lloyds Register (LR) Nippon Kaiji Kyokai (ClassNK)

The POWDRYER™ PD08 metal powder dryer is used to dry inorganic metal powder for the complex additive manufacturing (3D printing) process. It corrects the manufacturer’s fluctuating metal powder qualities, thus optimizing the metal powder’s flowability. It also reduces the number of air inclusions in finished workpieces. Significantly higher material densities are the result. Fields of application > Particularly for metal printing products where maximum strength is required > For the printing of alloys of aluminium, titanium, tool steel, etc. > Special tools for the metal-processing industry, machine and system engineering, prototype development, and more > Aviation, aerospace, and automotive industries, plus medical and dental technology

SCHOCK is your specialist in the production of cold-rolled profiles tailored to individual customer requirements. With a wide range of different technologies, we manufacture special profiles as customized functional elements up to complete assemblies. SCHOCK's roll forming technology operates economically and material-efficiently, offering significant advantages in product design: Unlimited range of shapes Highly precise functional dimensions Economical material utilization Energy-efficient manufacturing process SCHOCK special profiles are characterized by the highest precision and top-notch workmanship. With SCHOCK's roll forming technology, we produce profiles with extremely tight tolerances and excellent product properties. Thanks to creative tool solutions, we manufacture virtually burr-free profiles and process different materials with a tensile strength of up to 1000 MPa.

You can use this mesh sleeve to apply special adhesive when installing an anchorage device in a suspended ceiling or masonry with cavities. This metal mesh sleeve can be supplied with 3 different types of thread: M10, M16 and M22. Designed for suspended ceilings and masonry with cavities Available with 3 different types of thread: M10, M16 and M22

Earthing Clear tasks relating to earthing arise from relevant norms and regulations: DIN VDE 0101: 9.3.4 Measuring for earthing of operating media and systems All exposed metal parts of electrical operating media which are not part of the operational power circuit (structures), which are part of the electrical network must be earthed.Insulated areas should be created in special cases. All metal parts which are not part of electrical operating media should be earthed, provided this is appropriate (e.g. due to accidental arcing, capacitive and inductive coupling). Betonbau generally realises this task through discretely-structured visible connections between the HPAS of the building and active plant components. This offers you the advantage of high process reliability and contributed to overall comprehension and verifiability for everyone. Reinforced concrete also offers enormous advantages in itself with regard to equipotential bonding and integration in earthing current circuits.

Series V 600 - 1100 IS The HEINKEL Vertical De-oiling Centrifuge V 600 – 1100 IS is designed and built for the separation of cutting fluids and coolants from steel, cast and metal chips. Special properties for the customer’s benefit: Recovery of liquids and oil from chips produced by processing centres and from plastic pellets Simple and rugged design

The winding elements in our MKP(D) capacitors are surrounded by poison-free vegetable oil. Like our premium ranges of MKPg and MKP, the MKP(D) combines the best possible technical features with eco-friendliness and operational safety, using special metallizing patterns, our SINECUT slitting technology and optimized winding geometries. Besides excellent ratio of capacitance to volume, our MKP(D) capacitors distinguish themselves by high AC-voltage load capacity and suitability for high rms and surge currents. Our MKP(D) are available as single and three-phase capacitors and well-suited for all conventional applications in power factor correction. They have a self-healing dielectric and are provided with an irreversible overpressure disconnector (break-action mechanism, " BAM "). Connection is made through convenient standard 6.3mm tab connectors. Technical layout, testing and application accord to IEC60831, UL810 and CSA 22.2.

With our long year know how and first-class production facilities, we are manufacturing capacitors in two basic technologies: MKP and MKPg™. In MKP capacitors, the winding elements are surrounded by poison-free vegetable oil, in MKPg™, capacitors, they are immersed by neutral insulation gas. When designing our product ranges, we focussed on the best possible technical features combined with eco-friendliness and operational safety, using special metallizing patterns, our SINECUT slitting technology and optimized winding geometries. Besides excellent ratio of capacitance to volume, our power capacitors distinguish themselves by high AC-voltage load capacity and outstanding suitability for high rms and surge currents. Unlike some of our competitors who proudly quote fantasy ratings, we have really tested our capacitors to their rated values, allowing for sufficient reserves and guaranteeing flawless operation within the specifications.

In modern applications of power electronics, AC capacitors are among the most critical links in the chain of components when it comes to long operating life, safety and reliability of operation. Decades of proprietary ELECTRONICON experience in metallizing capacitor films and designing high-end capacitors have created our very own Know-How, for instance in special metallizing patterns, our SINECUT slitting technology and optimized winding geometries. This enables us to design AC capacitors with a high specific ratio of capacitance to volume, high AC-voltage load capacity and outstanding suitability for high rms and surge currents. The cylindrical capacitors of our universal AC/DC series "E62" are perfect for non-sinusoidal voltages and pulsed currents, e.g. as damping or commutation capacitors switched in parallel to a thyristor, or connected in series with a resistor (damping of undesirable voltage spikes during the switching of power semiconductors).

In power electronics in general, and especially in low inductance buffer circuits with higher voltages as well as in discharge circuits, the call for capacitors with low inductance tends to pose problems: traditional high voltage capacitors are filled with oil, and the generous bushings required for clearance and creepage as well as internal safety mechanisms add substantially to the self-inductance of the capacitor. Based on decades of proprietary experience in metallizing capacitor films, ELECTRONICON has created a range of high voltage capacitors in self-healing technology, using the opportunities of special metallizing patterns. Despite the high voltage rating, our E51 range is manufactured in dry technology and without expensive bushings. Inside the can made of self-extinguishing plastic, the capacitor element is enclosed in solid resin (PUR). Connection is made through robust flat terminals with internal thread.