Solar energy - Import export

Load-supported solar mounting frame for penetration-free roof mounting of PV modules as part of an extensive solar green roof build-up where retention volume and discharge delay are required.Available in inclines 10°, 15° and 20° Stability of the overall system proven in accordance with Eurocode 1 and 9. Property-specific proof of stability can be provided Consisting of base plate, bracket and Water Retention Box WRB 80FMA with capillary columns Supplied with associated module quick mounting rails, module clamps, rail connector set and wind bracing. Can be used in both a south-facing and an east-west orientation

Load-supported solar mounting frame for penetration-free roof mounting of PV modules as part of an extensive solar green roof build-up.Available in inclines 10°, 15° and 20° Stability of the overall system proven in accordance with Eurocode 1 and 9. Property-specific proof of stability can be provided Consisting of base plate, bracket and Drainage and Storage Board FKD 25MA. Supplied with associated module quick mounting rails, module clamps, rail connector set and wind bracing. Can be used in both a south-facing and an east-west orientation

Building-integrated photovoltaics can be used to enhance just about any part of the building‘s exterior: Balcony parapets and railings, external facades and roof elements, conservatories, and carports. Upon request, our products can also be designed to be used as a privacy screen, or with weather- or noiseproofing features. We manufacture modules using both glass-glass composite and glass-film techniques, up to a size of 3,70 x 2,50 m and with a glass thickness of up to 2x 12 mm – with a level of quality that can only be “Made in Germany“.

LED luminaire for floor mounting (incl. screw connection to the ground & ground spike) Diameter approx. 26 cm

LED luminaire for floor mounting (incl. screw connection to the ground & ground spike) Diameter approx. 26 cm With light sensor and motion detector Splashproof

garden emotions Solar LED light for wall mounting Total size approx. 19x16x8.5 cm With light sensor and motion detector

A utility needed to connect PV plants in the fields of Transylvania to a grid. The biggest challenge was to meet the client’s requirements as well as the National Grid Dispatcher's requirements, whose primary concern is the security of the system. Tavrida Electric’s solution provided a complete, secure and reliable answer to the customer’s needs which exactly meets the imposed utility requirements on energy production. As a result, the customer experienced the following benefits One of the lowest overall costs for MV interconnection switchgear Very fast project implementation (each recloser project has been completed within a month) Reclosers were integrated into the utility’s SCADA without any problems Islanding and Synccheck protection implementation

The Tavrida Electric recloser is perfectly suited as the intertie between the renewable generation site and the utility grid. Tavrida Electric's experience with solar applications has led to a variety of solutions that address the nuances of renewable generation requirements.

The 12 V/33 Ah rechargeable battery is recommended for use with the SES P4033 solar energy set. Maintenance-free, rechargeable lead-gel battery. Comes already charged and ready to use. Voltage: 12 V Capacity: 33 Ah Weight appr.: 12 kg Measurements: 195 x 130 x 155/180 mm

Practical and suitable for outdoor use, IP 44. Easy to mount. Simply insert the light or spotlight into the bracket after mounting. Free and environmentally friendly charging with solar energy. Can operate independent from the mains - ideal for carports, porchs, gardens. Solid and modern aluminium casing. Solar panel can be mounted independent from the light on the sunny side (incl. 4,75 m cable). 8 high-efficiency LEDs with frosted lens for illuminating a large area. Both lights horizontal and vertical adjustable. PIR sensor with max 180° angle of reach (horizontal) and max. of 10 m of surrounding. Duty cycle adjustable between 10 sec. and 60 sec. Response intensity adjustable by a twilight switch. Sensitivity adjustable. 3 rechargeable and exchangeable NiMH Mignon AA batteries included (2200 mAh). Light ON time is approx. 110 minutes with fully charged batteries. Solarmodul: 190 x 115 mm - Solar power 1 Wp. In colourful display-packaging. Design protected. Patent pending. LEDs:...

Practical and suitable for outdoor use, IP 44. Easy to mount. Simply insert the light or spotlight into the bracket after mounting. Free and environmentally friendly charging with solar energy. Can operate independent from the mains - ideal for carports, porchs, gardens. Solid and modern aluminium casing. 12 high-efficiency LEDs with frosted lens for illuminating a large area. Solar panel can be mounted independent from the light on the sunny side (incl. 4,75 m cable). Light can be rotated and locked. PIR sensor with max 180° angle of reach (horizontal) and max. of 10 m of surrounding. Duty cycle adjustable between 10 sec. and 60 sec. Response intensity adjustable by a twilight switch. 3 rechargeable and exchangeable NiMH Mignon AA batteries included (2500 mAh). Light ON time is approx. 90 minutes with fully charged batteries. Solarmodul: 220 x 190 mm - Solar power 2 Wp. This luminaire contains built-in LED lamps. Light unit not replaceable. In colourful display-packaging. Design...

Our corrugated tubing systems for use in renewable energies enable increased efficiency thanks to an increased surface area resulting from the corrugated design. In addition, they withstand high mechanical loads, also internal pressure loads, and are highly flexible. Individually adapted cuffs that match commercially available fittings and welded cuffs allow for easy installation and reduce assembly time. The solar hose made by FRÄNKISCHE INDUSTRIAL PIPES is ideal for solar water heating (from 24°C to 30°C). The hose is made of high-quality PE and is durably resistant against saltwater, chlorine, UV radiation and therefore best suited for solar service water heating. Due to pre-molded couplings, it can be split individually and even installed in already existing filter cycles.

M12 Solar Cell Full Cell. Type: Mono PERC Bificial Solar Cell 12 Busbars Grade: A Efficiency: 23.1% / 10.14W Technical data and design Dimensions: 210mm * 210mm ±0.25mm Thickness: 180 ±18µm Front (-): 12*0.1 ±0.05mm busbars (silver), 174 finger grids, interruption-free design, blue anti-reflective coating (silicon nitride), half or third cut design.

M12 Solar Cell Third Cell Type: Mono PERC Bificial Solar Cell Grade: A

M12 Solar Cell Half Cell Type: Mono PERC Bificial Solar Cell Grade: A

M12 Solar Cell Full Cell. Type: Mono PERC Bificial Solar Cell 12 Busbars Grade: A Efficiency: 23.1% / 10.14W Technical data and design Dimensions: 210mm * 210mm ±0.25mm Thickness: 180 ±18µm Front (-): 12*0.1 ±0.05mm busbars (silver), 174 finger grids, interruption-free design, blue anti-reflective coating (silicon nitride), half or third cut design.

M6 Solar Cell Full Type: Mono PERC Bificial Solar Cell 9 Busbars Grade: A Efficiency: 23% / 6.31W Technical data and design Dimensions: 166mm * 166mm ±0.3mm Thickness: 170 ±30µm Front (-): 9*0.1 ±0.01mm busbars (silver), 146 finger grids, interruption-free design, blue anti-reflective coating (silicon nitride).

M12 solar cell Sixth cell Type: Mono PERC Bificial Solar Cell Grade: A

Due to change in weather (wind, sun, snow...), pipe systems of solar thermal systems are subject to thermal expansion, to vibration, to make in short; various movements that have to be compensated in order to keep the system stable. Mera Bellows manufactures stainless steel expansion joints, formed from thin-walled seam-welded tubes, that are widely used for this scope of application.