Small loads - Import export

Securing vertically moving masses Safety for oblique and vertical axes Typical applications include oblique-angled and vertical axes in the automation industry to provide vital protection of personnel and machinery. Series KSP For small to medium-sized loads DGUV-approved One load direction

drylin® W - Advantages Dirt-resistant Weight saving Lubrication-free High speed Silent and light weight drylin® W - Advantages drylin® W - technical properties The technical properties of the drylin® W profile guide system Technical properties drylin® W - configuration Find the right profile guide system in 4 simple steps with the system and life calculation. drylin® W - configuration Single rail and housing bearing - round Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W single rail and housing bearing - round Single rail and housing bearing - angular Sizes: 6 mm, 10 mm, 16 mm and 20 mm DryLin® W single rail and housing bearing - angular double rail, round Sizes: 10 mm (rail width 40 mm, 74 mm and 120 mm), 16 mm (rail width 58 mm), 20 mm (rail width 82 mm) and 25 mm (rail width 120 mm) DryLin® W double rail Guide carriage, assembled Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W guide carriage, assembled double rail, square Sizes: 06 mm (rail width 30 mm), 10 mm (rail width 40 mm and 74 mm) and 16 mm (rail width 58 mm) drylin® W double rail, square Mono-slide guide carriage Size: 10 mm Mono-Slide guide Single rail and housing bearing - round, adjustable Sizes: 10 mm, 16 mm and 20 mm Linear Guides with “Turn-To-Fit” Hybrid bearing WJRM drylin® roller bearings - Roll and glide for easy movement. drylin® W hybrid bearing | roller bearing hybrid bearing double WJRM drylin® double roller bearing - Roll and glide for easy movement. drylin® W hybrid bearing double Double rail, reduced weight Sizes: 6 mm (rail width 30 mm), 10 mm (rail width 40 mm and 80 mm) DryLin® W double rail, reduced weight Hybrid carriage with rollers Size: 10, 16 mm DryLin® W hybrid carriage with rollers Stainless steel guide V4A, individual Size: 20 mm DryLin® W stainless steel guide V4A - individual Stainless steel guide V4A - double DryLin® W stainless steel guide V4A - double drylin® W slider rails/carriages drylin® W rail profiles with 3/8" threads, complete rails with Ø 10 mm through bore, with/without hand clamps DryLin® W double rail, square Gliding elements For round and angular rails. DryLin® W - Gliding elements Manual clamp Developed for simple positioning tasks. DryLin® W - Manual clamp Digital measuring system With immediate digital indication of position. DryLin® W - Digital measuring system Hand clamp for higher forces Designed for positioning tasks with higher forces. DryLin® W hand clamp for higher forces DryLin® WKMEX digital measuring system with external output drylin® WKMEX measuring system with external output DryLin® SLW - the compact* Spindle-lift tables The extremely thin unit is based on a DryLin® W profile system, and its entire length is supported. This design offers an extremely high torsional stiffening simultaneously with compact dimensions. DryLin® SLW - Compact DryLin® ZLW Toothed belt axis For quick positioning of small loads. DryLin® ZLW - Toothed belt axis Single rail and housing bearing - round Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W single rail and housing bearing - round Single rail and housing bearing - angular Sizes: 6 mm, 10 mm, 16 mm and 20 mm DryLin® W single rail and housing bearing - angular double rail, round Sizes: 10 mm (rail width 40 mm, 74 mm and 120 mm), 16 mm (rail width 58 mm), 20 mm (rail width 82 mm) and 25 mm (rail width 120 mm) DryLin® W double rail Guide carriage, assembled Sizes: 10 mm, 16 mm, 20 mm and 25 mm DryLin® W guide carriage, assembled double rail, square Sizes: 06 mm (rail width 30 mm), 10 mm (rail width 40 mm and 74 mm) and 16 mm (rail width 58 mm) drylin® W double rail, square Mono-slide guide carriage Size: 10 mm Mono-Slide guide Single rail and housing bearing - round, adjustable Sizes: 10 mm, 16 mm and 20 mm Linear Guides with “Turn-To-Fit” Hybrid bearing WJRM drylin® roller bearings - Roll and glide for easy movement. drylin® W hybrid bearing | roller bearing hybrid bearing double WJRM drylin® double roller bearing - Roll and glide for easy movement. drylin® W hybrid bearing double Double rail, reduced weight Sizes: 6 mm (rail width 30 mm), 10 mm (rail width 40 mm and 80 mm) DryLin® W double rail, reduced weight Hybrid carriage with rollers Size: 10, 16 mm DryLin® W hybrid carriage with rollers Stainless steel guide V4A, individual Size: 20 mm DryLin® W stainless steel guide V4A - individual Stainless steel guide V4A - double DryLin® W stainless steel guide V4A - double drylin® W slider rails/carriages drylin® W rail profiles with 3/8" threads, complete rails with Ø 10 mm through bore, with/without hand clamps DryLin® W double rail, square Gliding elements For round and angular rails. DryLin® W - Gliding elements Manual clamp Developed for simple positioning tasks. DryLin® W - Manual clamp Digital measuring system With immediate digital indication of position. DryLin® W - Digital measuring system Hand clamp for higher forces Designed for positioning tasks with higher forces. DryLin® W hand clamp for higher forces DryLin® WKMEX digital measuring system with external output drylin® WKMEX measuring system with external output DryLin® SLW - the compact* Spindle-lift tables The extremely thin unit is based on a DryLin® W profile system, and its entire length is supported. This design offers an extremely high torsional stiffening simultaneously with compact dimensions. DryLin® SLW - Compact DryLin® ZLW Toothed belt axis For quick positioning of small loads. DryLin® ZLW - Toothed belt axis drylin® W - Advantages Dirt-resistant Weight saving Lubrication-free High speed Silent and light weight drylin® W - Advantages drylin® W - technical properties The technical properties of the drylin® W profile guide system Technical properties drylin® W - configuration Find the right profile guide system in 4 simple steps with the system and life calculation. drylin® W - configuration

Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces.

This miniature force sensor was optimised with respect to its height and is, at only 3.4 mm, the lowest known sensor with strain gage technology. Hardly higher than the diameter of its connection cable, it can also be housed in conditions where space is limited. Along with its minimal geometry, the force sensor is also particularly light. It has a high resonance frequency to follow quickly changing load alternations. Despite its extreme miniaturisation, in its application it remains completely robust and suitable for industry, not only with regard to the highly flexible cable connections or the full welding of sensors for the measurement ranges ≥ 0 … 10 N. The miniature compression force sensors are flat, cylindrical discs with covered bottoms. The central load application button for taking on compression forces is an integrated part of the top, which is the sensor‘s membrane.

The tension and compression load cell model 8435 enables universal and fast installation, requires hardly any installation space and upgrades with technical data that are readily achieved by larger sensors. Due to its excellent price-performance ratio with regard to its mechanical and electrical data, the force sensor finds its place in products that are also manufactured in larger quantities and calculated with a small budget. This model of load cell uses proven strain gage technology to perform measurements. Strain gages are applied to the sensitive element and connected to form a full bridge. FEATURES Measuring ranges from 0 ... 200 N up to 0 ... 5000 N Small dimensions Inexpensive execution Stable anti-kink protection Made of high quality stainless steel Connecting cable suitable for drag chains burster TEDS optionally available

COMPACT PLATE METAL DETECTOR FOR THE INSTALLATION IN SMALL LOAD BELT CONVEYORS. •Detects all metals as inclusions or as loose parts •For smaller bulk heights or for the inspection of hollow bodies •Does not require a „metal-free zone“ •Quick and easy to install •High sensitivity in rough industrial environments •Excellent machine protection despite small investment costs •User friendly and reliable technology, proven for many years

The weight indicator CSD-903 processes weight values from silo and vessel scales quickly and reliably with analogue load cells. The small dimensions of the housing simplify installation. 7-digit display for good legibility Time-saving configuration Connectivity for an easy data transfer Basic dosing possible without additional programming effort

While the stiffness of regular protective sleeves often makes lifting easier, it can be rather uncomfortable when handling smallersized loads. Small gaps and limited contact areas make handling the stiff protective sleeve more difficult in this situation. The secutex “veloxClip“ is made with a slit along the reverse side. This makes it very flexible in the bending direction. In the longitudinal direction, on the other hand, the protective sleeve keeps its valued properties and remains stiff. This makes it a very simpletouse alternative when lifting loads with more limited contact areas. It is easy to insert through lower gaps and adapts flexibly to loads during lifting.

secutex protection also for wire ropes secutex protective sleeves in combination with Spanset lifting slings are always the best choice for lifting machinery elements and other loads. Because of the design, the lifting slings are wide, the load is distributed over a relatively large area. But sometimes secutex protective sleeves are also required for wire ropes. The wire ropes have an almost round diameter, the surface area to the load is rather small and the stress per area is high. In general, the use of wire rope sleeves can only be recommended for the lifting of large, round loads, i.e. without sharp or angular edges. There are slotted and also unslotted secutex wire rope protective sleeves available for one or two strands. The slotted variants can easily be assembled afterwards, the closed types, on the other hand, have to be installed during the manufacture of the wire ropes. Please note that the wire ropes often have a larger diameter than the nominal size

Protects Kanban cards from dirt and abrasion KANBAN CASE for SLC boxes (small load carrier), Euro containers, Kanban boards etc.; for insertion, tear-resistant and stretchable transparent film with resetting capacity, scanner-compatible various designs and sizes: open at the side or top transparent, yellow, red, blue, green, grey, black, white material: PVC KANBAN-HOLDER for holding kanban cards, label sleeves or documents of all common formats: transparent and reusable — CLIP; universal for sticking to many surfaces from plastic containers to wooden pallet feet — OVERHANGING; for hanging over small load carriers and other containers, containers remain stackable — SELF ADHESIVE; for flexible adhesion even on uneven surfaces, can be removed without leaving residues, can be reused several times on load-bearing surfaces thanks to multi-use property — MAGNETIC; for magnetic attachment to metallic surfaces

EXCOR VALENO Trays and Containers are made of hard plastics based on polyethylene and polypropylene and manufactured using deep-drawing or injection moulding techniques. The durability of these containers makes them the ideal choice for multiple uses, or may with narrower walls be employed as single-use packaging. The work pieces or small loads to be transported fit snugly into the containers. No additional VCI diffusers are needed since the plastic is impregnated with VCI substances. These two combined properties markedly simplify every kind of automated transport and storage process. Provided the instructions for use are followed EXCOR VALENO Trays and Containers will offer corrosion protection for up to five years.

Electric Rope Winch ESF Electric Rope Winch, capacity 150 kg up to 500 kg, short drum for up to 26 m rope, accessories ESF winches are designed as modular rope winches with 230 or 400 V drive fl anged on wormgear. The simple design is suitable for many lifting tasks with lower load cycles and small load requirements. The winch can also be easily integrated into the given construction by the mounting holes provided on all sides of the gearbox casing. The wire can take off in any direction. It has a compact design, because the basic confi guration only consists of gear, motor, and drum. The robust outward impression of the ESF winch is completed by practical corrosion protection and a combination of high-quality fi nishing and galvanised parts. The ESF winch is short term available. Do you need winch accessories? We deliver rope pulleys, idling rollers in different executions, and confected ropes on request.

The FD-H5 (H) is a compact, high-speed handling robot for small loads. A larger free space in the area of ​​the joint creates a large arm space. Like all robots in the FD series, the H5 model also has collision protection through improved fault detection / elimination. In addition, the integrated hose package guarantees optimal protection against getting caught during the robot operation. The most important technical data: Number of axes: 6 Working range (P-Point): R 866 mm Max. payload capacity: 5 kg Positional repeatability: +/- 0.05 mm Drive System: AC Servo Motor Drive Power: 1440 W

A big choice for small loads. With the new and practical height of the MINI-systainer® T-Loc III, you have even more options for storing products in a space-saving manner. New features of the MINI-systainer® T-Loc III include fully-functional card compartments, with label sets available as accessories. Of course, the MINI-systainer® T-Loc III can be attached to the MINI-systainer® T-Loc I as usual. * The exterior dimensions, measured without the feet, are: H + 4.7 mm Outside dimensions H* 142 x W 265 x D 171 mm Inside dimensions H 124 x W 254.5 x D 154.5 mm Weight: 0.60 kg * The outside dimensions are measured without feet: H + 4.7 mm

The MINI-LOAD series takes small-parts storage to previously unknown heights. Storage heights of up to 27 m can be reached without a drop in performance. Our units can work in automated small-parts warehouses handling containers or boxes equally well. The compact form of the MINI-LOAD results in especially low approach dimensions both horizontally and vertically. So DAMBACH rail-guided storage and retrieval machines (SRMs) for small parts storage make full use of the space available. A very diverse range of load-handling equipment is available to suit the goods to be stored and the performance targets. Telescopic forks are adequate for single-deep storage, but combination telescopic forks or grabs are necessary for double-deep storage or to boost the performance of transfer operations on the apron. Our MINI-LOAD SRMs can be adapted to customer requirements and loads. The integral lifting and lowering rope results in highly dynamic vertical transport.

The perforated metal plank type BR is particularly suitable for areas of heavy loads on small contact areas due to its rhomb profile with extra high punching (punched holes 2.5 mm). Here, for example, vehicle navigability on ramps or parking areas are to be considered.

SV Loader units are designed to load small vehicles from either level access or dock levellers. Ideally suited for the parcel, postal and 3PL markets, this unit is easy to use and can be combined with our BestFlex, PowerFlex or BestConnect to create a total loading solution. Construction Heavyduty construction and supporting framework make Mobile Loaders one of the most robust units of its type on the market. Shrouded Buttons To limit the damage to emergency stops, FMH Conveyors add fabricated steel shrouds to the exposed emergency stop buttons. Fully Guarded All moving or rotating parts are fully guarded to prevent entrapment and injury. Mobile Mobile Loader units are fully mobile utilising 200mm heavy duty castors. Power Mobile Loaders are normally powered via a simple 240Vac plug connection. 110Vac and 415Vac versions are available. Each unit comes with ancillary sockets to power adjoining flexible conveyors.

MiniTherm GV4730 temperature transmitter hygienic design ◼Compact stainless steel case ◼Temperature measuring transmitter for installation in a separate thermowell in hygienic design ◼Temperature range -50 … 200 °C ◼Measuring insert, spring loaded ◼Compact, small design ◼High-resolution graphic display with intuitive user interface and background lighting ◼Accuracy of 0.1% of the set measuring range ◼Quick set-up function ◼Measuring resistance Pt100 ◼Process connection bottom or back ◼According to 3A requirements

Compound anchors are particularly suitable for applying high load values ​​with small edge and axial distances, as they anchor without expansion pressure. They can be used in dry and damp subsoil, as well as cost-effective and efficient for side-by-side assemblies.

The robots of the R series set the standard for all industrial robots for small to medium loads. The compact design and industry-leading speed, reach and working range make the R Series robots ideal for a wide range of applications in a wide variety of industries. The brand new R-Series robots typically set the standard for all these small to medium industrial robots. The compact design and style as well as the managerial speed and work selection make the R-Series robots ideal for many applications in many different industries.

Extended variant with many more clamping possibilities MANOK plus, the extended variant of our manual MANOK stationary chuck differs through use of adaptation elements. For example, many more clamping possibilities are available to you in combination with the MANDO Adapt mandrel-in-chuck or the jaw module for even larger clamping diameters. Lightweight variant And most recent: Due to the optional lightweight CFRP design, with the MANOK plus CFK you can save half of the weight. The lightweights are easy to set-up and particularly well-suited for milling machines and machining centers with small load weights. Plus they protect machine components, which ultimately helps the machine accuracy. When loading manually or with a handling system, often the only possible solution is a lightweight stationary chuck.