Slip - Import export

SHIP LAUNCHING SLIP COAT

GAT is a manufacturer and supplier of highly advanced Slip Rings and Rotary Unions. Further to an extensive range of standard products, we also provide individual solutions as your competent partner. Our Slip Rings are based on a modular system and are available with contacting and contactless transmission technology. Combined units comprising Rotary Unions are also available and can be realized as compact units. Compliance with specific directives or protection classes as well as certifications in accordance with UL/CSA can be provided on request.

Self-adhesive conformable anti-slip tape for securing uneven tread surfaces, e.g. made of checker or lens plates. • Self-adhesive conformable anti-slip tape for improved safety of paths and treads • Suitable for indoor and protected outdoor use • The conformable aluminium tape adapts to uneven surfaces and is particularly suitable for surfaces made of checker or lens plates • Areas of application are steps, ramps, industrial floors and treads on machines and vehicles • In accordance with ASR A1.5/1.2 "Floors" to DIN 51130 slip resistance (R group) R13

Safely guide many different cables in a confined space with e-spool. e-spool uniquely combines two different energy supply systems: one standard energy chain is guided by a roller, providing the correct length and tension of the energy supply system through an integrated spring. In the home position, the energy chain is completely rolled up to save space. The twisterband connects the roller with the shaft end block, serving as an interface to the supply side cables. - According to DIN EN 17206 and DGUV principle 315-390 - No tensile strain on the cables - Energy supply is possible in all directions (horizontal, vertical, diagonal) - Space-saving, no "chain station", as the energy chain is rolled up in the starting position, ensuring the paths remain clear - Cables can be retrospectively added or changed - Maximum extension and retraction speed 1m/s

When rolling off a load over the floor, the heavy load can slip uncontrollably on the smooth warehouse floor. There is considerable risk of accidents. Expensive equipment can be damaged under their own weight and may require timeconsuming reprocessing. secutex turning mats (see figure above) are completely slipresistant. The turning manoeuvre can be performed safely and smoothly.

Optigrun Anti-Slip System T for green roofs with roof pitches ranging from 15 to 45°; load distribution against the eaves.

Slip rings provide the basis for rotating current transfer and all its demanding applications. Which challenges can we meet for you? In combination with our slip rings, brush holders fitted with carbon brushes ensure that the current to be transferred is collected. Thanks to their increased vibration resistance, solid-cast slip rings can withstand high mechanical and electrical loads. These are available from MACK in many different versions, many of which are even available from stock.

Push-pulls enable transportation of loads with inexpensive and place saving slip-sheets which are usually made of plastic or cardboard. This KAUP attachment makes expensive and unwieldy wooden pallets superfluous and optimal economical loading of overseas containers possible.

LAUNCHING GREASES - BASE COAT

LAUNCHING GREASES - SLIP COAT

LAUNCHING LUBRICANTS

The ROTOKOMBI system allows all rotary union and slip ring types to be combined. The result is a complete rotary transmission system from a single source, with perfectly matched interfaces. ROTOKOMBI systems ensure that an optimally adapted sealing system is available for any medium. For any type of electrical transmission a corresponding system is selected to ensure adequate reliability. Thanks to the modular design, individual components can be replaced, retrofitted or upgraded as necessary. All components are selected and combined to meet your specific demands, without limitations to the number of electrical poles, media or size. Special solutions such as ATEX/IECEx or certifications according to UL/CSA regulations are also available on request.

SHIP LAUNCHING BASE COAT

as a protection, separation and slip layer to protection the waterproofing as a second slip layer in conjunction with PE film 0.2 mm under public areas to prevent the transfer of shear and tensile forces for the chemically neutral separation of two incompatible materials Specific properties resistant to bitumen and polystyrene resistant to most chemicals smooth surface ageing resistant moisture-blocking thermally weldable

Optigrun Anti-Slip System N is used on roofs with 15 - 45° roof pitch, if needed in combination with Optigrün Fastening Profile.

Our individually combinable components for modular slip ring systems offer you maximum flexibility in planning your rotating current and data transmission systems. The individual components from MACK are available in different sizes and versions – from space-saving slip rings to the solid power ring for high currents. Naturally in connection with the right current collector. What characterises this system is optimum adaptability for every single customer application and installation situation.

The small slip-ring system in combination with the matching modular slip-ring system is our first choice for you for current and signal transmission in small spaces. With its low 16 mm height, the MACK small slip-ring system can transfer current up to 25 amperes per pole reliably. Its 15 mm high little brother is designed for 15 amperes.

Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

Versatile The nonslide diamond surface of Solid is available in two variants. AGO-Solid: In standard sheets with dimensions of 2,100 x 500 mm or cut to size. One-sided rubberized. Solid-Topsoft: In rolls max. 400 m x 1,550 mm. Smaller rolls are available on request.

Optigrun Anti-Slip System for green roofs with roof pitches of up to 45°; with thrust thresholds and stainless steel cables.

Thin sheet made from recycled polyethylene for use as a separation, protection and slip sheet.

Special fleece to protect roofs, providing a combination of protection, separation and glide functions. Suitable for public roofs when its laminated glide layer is used in combination with an approximately 0.2 mm thick PE foil, thus conforming a glide fleece.[Translate to English:] Special fleece to protect the roof waterproofing with a combined separating and sliding function In combination with the PE separating and sliding film TGF 0.2, it is suitable as a protective and sliding layer for traffic roof structures Coefficient of friction with additional PE film <0.6 according to the requirements of the FLL (DIN 53375)

BPAfree TRITAN water bottle Nonslip SILICONE grip Easy drinking with its specially designed lid and mouth structure The drinking area is protected against dust thanks to the protective lid 100% leakproof with the silicone plug system and lid lock developed against leaks Ease of drinking with the fixable lid Onehanded use No odor Dishwasher safe. Resistant to impacts and breaks thanks to TRITAN material Carrying rope made for easy transportation Provides easy grip and transportation thanks to its ergonomic structure Specially designed nonslip areas on the covers Environmentally friendly with longlasting use Clear and smooth surface like glass with TRITAN material

With non-slip foam underside and fabric surface. Non-slip. • Mouse pad with non-slip foam underside and textile surface

Extra flat mouse pad with a non-slip surface so you can easily position the cursor. • Extra-thin mouse pad • With velvety surface

Original Palgrip® pallets from Craemer offer unparalleled smoothness and tracking on roller conveyors or chain conveyors. The abrasion-resistant anti-slip plates provide excellent slip resistance on the deck or under the runners. The high quality Palgrip® grain structure ensures an absolutely secure hold even in damp conditions. Palgrip® provides an all-round reliable solution to your logistical requirements. Only available from Craemer. The Palgrip® anti-slip coating is resistant to cold and heat, from -30°C to +40°C. Compared to common plastic surfaces, Craemer Palgrip® anti-slip sheets offer absolute slip resistance even in high humidity thanks to their grain structure. The unique Palgrip® anti-slip panels are made from high quality HDPE and are permanently part of the deck and the anti-slip runners will last the lifetime of the pallet. Even in an inclined position, your load remains static on the pallet deck

• The indestructible water pump pliers, with safety box joint for highest stress • Double-toothed jaws • Cogs additionally induction hardened • Optimum jaw geometry with self-locking serration • Gripping capacity 40% above ISO by means of arch-shaped pitch adjustment • Ideal fulcrum, minimum effort • Finger trap protection for safe work, prevents injuries caused by squeezing • Box joint with wide guide surfaces • Handles with ergonomically shaped SoftGripp multi-component sleeves • SoftGripp handles with SystemSocket for holding optionally available accessories, e.g. the easily attached SystemClip for fall protection • Made of chrome vanadium steel, forged, oil-hardened

The L3® is the ultimate heavy-duty plastic pallet for intralogistics applications. It impresses with a high load-bearing capacity of up to 2,000kg in high rack warehouses and with its slip resistance. The plastic pallet is equipped with Palgrip® anti-slip strips on the top deck as a standard feature, offering a secure hold even at an inclined position or in damp conditions, while the evenly closed Palgrip® anti-slip runners ensure absolutely smooth running on all standard conveyor technology systems. The L3® is long-lasting and remains maintenance-free. Dimensions L x W x H: 1200 x 1000 x 160 mm Weight: 26,0 kg Material: PE Load capacity: static 7500 kg, dynamic 2000 kg, In Racking System 2000 kg Reinforcement Profiles: 5 Colour: light grey / light blue or basalt grey / light blue Runners: 3, welded Palgrip® anti-slip strips on the top deck Palgrip® anti-slip coating under the runners Option: — Rim options: Without, 5 mm — RFID transponder

The positive driven AT5 conveyor belts from BEHAbelt enable slipfree traction, even with the smallest pulley diameters of only Ø 18 mm. This means that even conveyor sections with the smallest transfers can now be utilized with a slipfree belt solution. In combination with a maximum belt width of up to 700 mm, the new product series from BEHAbelt represents a new product solution which once again shifts the previous limits of the possible applications of positivedriven belt solutions on the market. This makes the positive driven conveyors perfect for applications that require precise timing, positioning and reversing. The low preload minimises the bearing load and thus reduces the energy requirement as well as the maintenance effort.