Sea water - Import export

Advantages Automatic cleaning process without interruption of filtration process; maintenance-free Area of application For the filtration of liquids like coolants, sea water, fuel, etc. Flow rate Various filter sizes and the modular design enable any required flow rate. Interest in our products? Contact us! Download Product Brochure classification number F30 Filter aid - Filtration degree 25 µm - 2 mm Medium Cooling water, emulsions, sea water Filter material Slotted tube cartridges

For mounting screwed connections, e.g. at combustion engines, threads on pipe fittings, flange joints and fittings of superheated steam lines, exhaust pipe and combustion chamber screwed connections, gas and oil burner mounting bolts To prevent burning together, seizing or rusting-on of screwed connections at water influence Suitable for brake systems of vehicles Advantages and benefits Excellently suited for preventing binding of threads exposed to high temperatures, corrosive environments and moisture Highly effective due to high level of pressure absorption Excellent corrosion protection Absolutely resistant to fresh water and sea water Extremely adhesive No classification according to (EG) No. 1272/2008 For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Use a brush, spatula or similar

SPIROL manufactures Coiled Spring Pins out of 316 stainless steel to meet specific application requirements. Type 316 stainless steel is similar to 302/304 stainless steel with a slightly higher nickel content and the addition of molybdenum. The molybdenum content increases the chemical resistance of this alloy greatly. 316 exhibits superior pitting resistance against sea water, acetic acid vapors, chlorides, sodium and calcium brines, hypochlorite solutions, phosphoric acid, and the sulfite liquors and sulfurous acids used in the paper and pulp industry. This alloy is also austenitic, non-magnetic and non-hardenable using conventional methods. 316 stainless steel has better mechanical properties at elevated temperatures than 302/304 and offers excellent mechanical integrity at subzero temperatures. Typical applications for SPIROL's 316 Stainless Steel Coiled Pins include the following: marine, processing equipment, industrial, oil and gas and medical.

Food-supplement with the important mineral nutritient Calcium, obtained from a purely natural source. Lithothamnium calcareum is the melodious name of an unique seaweed from the family of the red algae, that grow among others at the coast of the Glénan Islands in western Brittany. The special feature of this algae is its ability to collect and accumulate in the mineral-rich sea water naturally occurring substances, especially calcium. In the course of time the Lithothamnium algae takes on a light red till white, coral-like look. Among other things, calcium has an essential share in the formation of the inorganic substance of the bones and teeth.

The pressure transmitter DMK 457 with ceramic sensor has been designed for typical applications in shipbuilding and offshore constructions as alternative to our pressure transmitter DMP 457 with piezoresistive stainless steel sensor. In combination with the copper-nickel-alloy the DMK 457 is suitable for seawater, e.g. level measurement in ballast tanks, etc. Features: — nominal pressure: 0 ... 400 mbar up to 0 ... 600 bar — accuracy: 0.5 % FSO — shipping approvals GL (Germanischer Lloyd), DNV (Det Norske Veritas), CCS (China Classification Society), ABS-certificate (American Bureau of Shipping), LR-certificate (Lloyd´s Register) — pressure port CuNiFe (sea water resistant) — oxygen application Optional Features: — IS-Version Ex ia = intrinsically safe for gases and dusts

fluid 435 prevents corrosion during long-term stock storages and short-term outside storages, even in areas with high air moisture. fluid 435 is a reliable protective against sea-water atmosphere. fluid 435 does not penetrate small gaps or narrow clearances. fluid 435 is also offered in the colors red and green. The colors are working as an indicator, to prevent over-spraying and excess application.

Mold Protect H1 prevents corrosion during long-term stock storages and short-term outside storages, even in areas with high air moisture. Mold Protect H1 is a reliable protective against sea-water atmosphere. Mold Protect H1 does not penetrate small gaps or narrow clearances.

fluid 500 KE is extremely hydrophobic, therefore high polished surfaces can be protected perfectly. It prevents corrosion during long-term stock storages and short-term outside storages, even in areas with high air moisture. fluid 500 KE is a reliable protective against sea-water atmosphere. fluid 500 KE can be used as corrosion protection during EDM. There will not be any influence on the conductivity of the transmitting medium. fluid 500 KE does not penetrate small gaps or narrow clearances.

— outside coating offers increased abrasion resistance, acts as a mechanical protection of the jacket and preventswater absorption — very low weight to relieve fire fighting forces — very good kink radius for high flexibility — low friction/pressure loss due to smooth EPDM-rubberlined — high-quality EPDM-rubberlining is extremly resistant to aging, ozone and UV radiation — root resistant, low maintenance — cold resistance: up to – 40 °C — heat resistance: up to +100 °C (for water) — also suitable for sea water, hot Inside: high-quality, very light synthetic rubber on the basis of EPDM, jacket of 100 % high tenacity synthetic polyester yarn, circular-woven twill weave, warp and weft threads multiple twisted Outside: coloured polyurethan coating (standard colour: red, other on request)

— very low weight to relieve fire fighting forces — very good kink radius for high flexibility — low friction/pressure loss due to smooth EPDM-rubberlining — high-quality EPDM-rubberlining is extremly resistant to aging, ozone and UV radiation — root resistant, low maintenance — cold resistance: up to – 40 °C — heat resistance: up to + 100 °C (for water) — signal colors offer high perceptibility/visibility in buildings and difficult terrain — also suitable for sea water, hot water, water steam and many other chemicals Inside: high-quality, very light synthetic rubber on the basis of EPDM Outside: jacket of 100 % high tenacity synthetic polyester yarn, circular-woven twill weave, warp and weft threads multiple twisteds Applicable standards: — according to DIN 14811:2008 class 1 — according to BS 6391:2009 Type 1 — ÖNORM F2105

— high abrasion resistance and durability by longitudinal ribs — by trouble with a damage of the cover an easily repair is possible — very good kink radius for high flexibility — low friction/pressure loss due to very smooth inside rubberlined — high-quality EPDM-rubberlining is extremly resistant to aging, ozone and UV radiation — root resistant, low maintenance — cold resistance: up to – 40 °C — heat resistance: up to + 80 °C (for water), for short time up to +100°C — also suitable for sea water, hot water, water steam and many other chemicals Inside: Very smooth high-quality Nitrile/PVC rubberlining. Jacket of 100 % high tenacity synthetic polyester yarn, circular-woven twill weave, warp and weft threads multiple twisted, embedded in a rubber compound, optimum protection of the jacket Outside: high-quality Nitrile/PVC rubberlining with longitudinal ribs

Feature: — high abrasion resistance and durability by longitudinal ribs → by trouble with a damage of the cover an easily repair is possible — minimum maintenance — extremely resistant to aging and ozone and UV — temperature range from – 40 ° C up to + 80 ° C, for short time up to +100°C — minimum friction loss because of very smooth inner lining — suitable for sea water, hot water, oil, fuel, many chemicals Construction: — inside: very smooth for minimum friction loss — jacket of 100 % high tenacity synthetic polyester yarn, circular woven, embedded in a rubber compound provides optimum protection of the jacket — high-quality Nitrile/PVC compound is forced through the jacket in the extrusion process (standard colour: black; other on request) — outside: longitudinal ribs for excellent abrasion resistance

Feature: — high abrasion resistance and durability by longitudinal ribs → by trouble with a damage of the cover an easily repair is possible — minimum maintenance — extremely resistant to aging and ozone and UV — temperature range from – 40 ° C up to + 80 ° C, for short time up to +100°C — minimum friction loss because of very smooth inner lining — suitable for sea water, hot water, oil, fuel, many chemicals Construction: — inside: very smooth for minimum friction loss — jacket of 100 % high tenacity synthetic polyester yarn, circular woven, embedded in a rubber compound provides optimum protection of the jacket — high-quality Nitrile/PVC compound is forced through the jacket in the extrusion process (standard colour: black; other on request) — outside: longitudinal ribs for excellent abrasion resistance

Powercord is used to fill large voids in power cables by simultaneous longitudinally waterproofing in low, medium and high voltage applications. Powercord is available in semiconducting (Typ PSC) and insulating (Typ WBC) performance in the diameters of 8 mm to 50 mm, with very high strength in areas of 150 - 2000 N. Powercord is reaching a very high water absorption, depending on the diameter more than 10 liters / meter, even in sea water up to 2 liters / meter, is possible. Advantages: - Diameter and strength can be individually and quickly adaptable to any form of cable - Swellability and Conductivity of the material is adaptable to the cable construction - Powercord is up to 80 % lighter than other filling materials - Cables constructed with Powercord can be bent easily - Powercord can be used in the cable manufacturing process easier, because torsion can be compensated - Improved CO2 balance (up to 80%) compared to conventional cable filler in EPDM