Screw plugs - Import export

CSN® Explosionproof screw plug or flanged immersion heaters ( Ex ) are perfectly suited for direct heating of liquids or gas / air mixtures in hazardous areas. The devices are available with attached or integrated temperature monitoring systems. For these heaters various high quality stainless steel grades are available. The electical immersion heater type 94./..EEs….T.(.) is designed for the heating of liquids and quit gasair mixtures in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 97/23/EG) Art. 3 Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL.

Ex-screw plug for the secure sealing of unused threaded or clearence holes. Suitable for applications in hazardous areas. Features: — Group (Zone) II 2 G (1, 2) II 2 D (21, 22) — Marking Ex eb IIC Gb Ex tb IIIC Db — Temperature range -40 °C / + 85 °C — Protection grade IP66 / IP68 - 10 bar (30 min.) — EU-Type certificate PTB 16 ATEX 1006 — IECEx-Certificate IECEx PTB 16.0017

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B

Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range depends on the material of the o-ring VMQ: -55 °C / + 120 °C EPDM: -40 °C / + 120 °C NBR: -40 °C / + 100 °C — Protection grade IP66 / IP68 - 10 bar (6h) / IP69K

Most common ends are different types of end loops and hooks, there are also a wide range of other mechanical attachment possibilities such as coiled in and screwed in attachments. Examples are, half hooks, German loops, English loops, extended hooks, side hooks, side loops, screw plugs and screw shackles.

Flameproof mini line heaters ATEX Ex II 2 G Ex’d’ IIC T4-T6 nach EN60079-0 und EN60079-1 The Exheat range of flameproof mini line heaters consist of a screw plug or flanged type immersion heater mounted in a thermally insulated heating vessel. They are designed to efficiently transfer heat to a flowing medium (liquid, air or gas). All flameproof heaters are fully ATEX certified and designed for use in zone 1 & 2 hazardous areas, gas group IIC.

Features • The Plug & Play range includes three dowel sizes (ø 5, 6 and 8 mm) for the most common projects • The all-purpose wall plug Trika holds in almost all building materials • Perfectly matched screws for optimum wall plug function Contents: • 60x all-purpose wall plugTrika 5/31* + screws • 70x all-purpose wall plug Trika 6/36* + screws • 30x all-purpose wall plug Trika 8/51 + screws * only suitable for single-layer plasterboards

The artist of the area management: On less than 1 m² the "Delux" displays 18 different print media, brochures and flyers, decorative and protected. The wall brochure holder becomes an individual wall magazine. Your flyers and advertising media are 100% visible as the display is completely transparent. The brochure hanger made of unbreakable acrylic is equipped with 48 mm filling depth per compartment. Screws and rawl plugs for wall mounting are included.

Assembly lubrication of machine parts, screw connections, fittings, flange and plug-in connections, guides, sliding and sealing surfaces of ovens, boilers, burners, motors, engines subject to high-temperature conditions Separating paste Advantages and benefits Excellently suited for preventing seizing and burning together Highly effective due to outstanding separating action and pressure absorption Good protection against ingress of splashing and condensed water Free of heavy metal compounds Good corrosion protection Excellent water resistance Wide operating temperature range Optimum ratio of screw tightening torque to achievable pre-tension Also available as spray version OKS 2351 For best adhesion, clean contamination and other lubricants from thread and slide surfaces. Best way is to clean mechanically first (for example, with a wire brush) and then with OKS 2610/OKS 2611 universal cleaning agent. Apply sufficient OKS 235

SL 800 provides optimal protection against wear and is suitable industry-wide. It contains premium active ingredients with long- lasting effects. The special lubricant protects all metal friction surfaces that are exposed to extreme temperatures and is there- fore suitable for use at temperatures of up to around 800ºC (to around 200ºC with dry lubrication) and will withstand cold down to around -35ºC. SL 800 prevents corrosion, oxidation, freezing, galling and wear. Adherent and wear-resistant Pressure-resistant Water-, salt water- and solvent vapour-proof CFC- and silicone-free Free from hard metals (e.g. lead, nickel, cadmium, copper) Makes disassembly easier, even after a long period of use Fields of application Brake systems, exhaust pipe fittings, spark plugs, gears, chains, channels and gearboxes, screw-, bolt-, plug- and pipe-connections, kettle- and oven-fittings. Usage Shake can vigorously for around 30 seconds until the mixing ball can be heard, then just spray SL 800...

Assembly lubrication of machine parts, screw connections, fittings, flange and plug-in connections, guides, sliding and sealing surfaces of ovens, boilers, burners, motors, engines subject to high-temperature conditions Separating paste Advantages and benefits Excellently suited for preventing seizing and burning together Highly effective due to outstanding separating action and pressure absorption Good protection against ingress of splashing and condensed water Free of heavy metal compounds Good corrosion protection Excellent water resistance Wide operating temperature range Optimum ratio of screw tightening torque to achievable pre-tension

Double riveted Strong side threads Eyebolt cannot be lost Hammer - in screw including PE - plug 12 x 65 mm Available surfaces: in lengths of 140 mm and 200 mm Hot dip galvanized Solid copper Stainless Steel (1.4301) We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

The Suction Lances have the following Features: - G1 1/2" bis G2", screw cap, plug in flange, others on request - PVC- and Silicone-cable - ABS-enclosure - upto 3 NO, NC, 2 change over - overall length: upto 1.500 mm - Temperature range 0°C to +60°C - upto 0bar - upto IP64 - Options: non return valve

Screw-In and Plug-In Elements Star-Pleated Elements, Basket and Ring Sieves Heavy Fuel Elements Paper, Inorganic Glass Fibre and Polyester Elements Plastic Elements Multimantle Elements

▪ Analogue version ▪ 5-pin connection ▪ Can be used with all analogue Hydraulic Testers of the PPC series ▪ CAN version ▪ 5-pin SPEEDCON connection plug ▪ Housing: Aluminium (black anodised) ▪ Gaskets: FPM (Viton®) ▪ Accuracy (at 21 cSt): ±1 (% FS*) or ±1 (% of the displayed value) ▪ Pressure measurement connection: SMK20 (M16 x 2) ▪ Temperature measurement connection: M10 x 1 (standard screw plug) ▪ Calibration certificate on request ▪ UNF version on request Ambient Conditions ▪ Media temperature: -20 °C ... +90 °C / -4 °F ... +194 °F ▪ Ambient temperature: -10 °C ... +50 °C / +14 °F ... +122 °F ▪ Storage temperature: -20 °C ... +80 °C / -4 °F ... +176 °F ▪ Permissible particle size: < 10 Micron for SFM-015 < 25 Micron for others ▪ Viscosity range: 10 ... 100 cSt Electrical Data ▪ Response time: 50 ms ▪ Flow Turbine (analogue): A PPC-04/12-CAB3 (3 m / 9.84 ft) Connection Cable is needed to connect the sensor to the current Hydraulic Testers. A PPC-04/12-CAB5-EXT (5 m / 16.40...

- Whitworth pipe thread - Frame components with media contact: Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Frame components without media contact: Material brass chemically nickel-plated - Temperature range 32 to 176 °F (0 to +80 °C) - Working pressure range 0 to 362 psi (0 to 25 bar)

The angle transducers have a magnetic scanning according to the HALL principle. Due to the robust design, critical and interference-free applications in harsh environments can be realized. They have a robust housing (wall thickness > 5 mm) made of aluminium or stainless steel, shaft and ball bearing made of stainless steel, shaft with flattening, rotor with shaft and permanent magnet mounted in prechamber, sensor circuit consisting of ASIC with Hall elements and interface electronics housed in closed main chamber. Two models are available: For low and high temperature applications. The model for low-temperature use is equipped with a special grease for bearings and shaft seal. Seals and shaft seal are made of PTFE. Cable gland with clamping jaw pressure screw and silicone seal. The high temperature model is without shaft seal. Under the rear cover, there is a signal path switch (CW/CCW). On the side there is a preset button (4 mA) placed under a screw plug.

The PALLMANN rener system produces high quality bers from chips, saw dust, shavings, and annual plants for MDF, HDF, and insulation board production. PALLMANN supplies complete plants consisting of perfectly coordinated components to ensure the highest ber quality with minimal energy input. High quality ber production for MDF, HDF and insulation board plants with PALLMANN rening systems Chip bin for pre-steaming of chips: The closed design of the bin with downward tapering base is equipped with vibrating motors to ensure a continuous discharge. Circular steam injection results in perfect pre-tempering of the chips. Integrated load cells allow the online presentation of the lling level of the chips inside the bin. Plug screw: The extremely heavy and robust plug screw feeds the chips reliably into the digester and squeezes out excess water by doing so. The position compensation, caused by the thermal expansion of the digester

Characteristics, Function Plug screws can be equipped with a subsequent dewatering unit behind the drainage.Third party products can also be retrotiffed with this type of dewatering unit. Advantages Payback after approx. 5 months Cost savings in downstream processes Saves dryer energy Additional energy savings at the main motor Low maintenance costs

Characteristics, Function The newly developed “EcoDrain Unit” allows the dewatering degree of wood chips in the plug screw to be increased. A newly designed dewatering zone allows for easy exchange of the wear parts. Advantages Payback after approx. 6 months All plug screw assemblies retrofittable Increased dewatering of the wood chips Energy savings in downstream processes Simple wear part exchange Low maintenance costs due to exchangeable wear parts

Characteristics, Function A high-performance chip bunker, which transports the most different feed materials trouble-free to the plug screw, is installed in front of the modern refiner plug screw assemblies. The new high-performance chip banker can be retrofitted to any Pallmann Refiner but can also be installed on machines from other manufacturers. Advantages Increased arrangement of the steam nozzles and more precise level monitoring for more effective presteaming of the wood chips Energy savings due to less boiling time of the wood chips Reduced bridging

The PALLMANN refiner system produces high quality fibers from chips, saw dust, shavings, and annual plants for MDF, HDF, and insulation board production. PALLMANN supplies complete plants consisting of perfectly coordinated components to ensure the highest fiber quality with minimal energy input. Chip bin for pre-steaming of chips: The closed design of the bin with downward tapering base is equipped with vibrating motors to ensure a continuous discharge. Circular steam injection results in perfect pre-tempering of the chips. Integrated load cells allow the online presentation of the filling level of the chips inside the bin. Plug screw: The extremely heavy and robust plug screw feeds the chips reliably into the digester and squeezes out excess water by doing so. The position compensation, caused by the thermal expansion of the digester, can be safely implemented by the special design of the robust base frame. Due to the extended high-compression zone, a very even moisture...

The chip-washing system reliably separates sand, rocks, and other contaminants from chips. This system is an indispensable machine technology especially for use with chips purchased from third parties and strongly contaminated raw material to minimize the wear of all downstream components, especially the plug screw and the grinding segments of the refiner. The chip-washing system also pre-conditions the chips for subsequent fiberizing. Characteristics, Function The chips are fed to the chip washing system. Here, a rotor dunks the chips under water and produces a high turbulence. Thus, the system implements the best separation of foreign bodies from the chips. Contaminants such as sand and rocks sink to the bottom and can safely be discharged. Afterwards the chips are transported in the water stream into the dewatering screw where they are separated from the process water. At this point the process water is discharged through screen plates. After being reconditioned and freed...

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

Using a box, the water transfer point is shifted from the inside of the building to the property boundary – in this way the water supplier can access the water meter at any time. The BEULCO water meter box with protection from frost is planned for the installation of water meter systems outside buildings. The box is not only suitable for the house connection, but also for the connection of cemeteries, parks, garden plots, camp sites, green areas or of similar fields. — Modular design — High qualitative components inside — water meter is protected against penetrating water — water meter is installed frost-free — different covers for different load classes — 40% less weight than comparable products The connecting conduits in basic version are equipped with pipes, diameter 32 (DN25), proven by DVGW. Both conduits consist of a pipe instead of a thread connection and can be joined comfortably by means of various PE pipe connectors, either by screwing, plugging-in or welding.

• low-cost version with set-screw • plug in - oscillation dampening • Torque range: 0,7 - 12,5 Nm • Shaft diameter: 3 - 14 mm • Temperature range -20 to +70°C