Screening - Import export

Set up the aluminium partition wall including the partially printed banner at the desired location with a few easy-to-move steps. The partition consists of an aluminium frame, which is fixed on two stable angle feet. The room divider is delivered to you with a crystal clear banner made of PVC, which can be partially printed with an individual motif. Through the flat piping sewn all around the banner, the foil is inserted into the profile of the aluminium frame and stretched at the same time. The partition wall is ideal for implementing distance rules and separating areas from each other. At the same time, the partial transparency allows a view of the room. This is particularly advantageous where visual contact between staff and visitors is important.

In those areas where employees meet each other or where sales staff and customers are standing together, special hygiene regulations must be observed in the current situation. The "Construct" partition wall is ideal for protecting employees and customers. The silver anodised aluminium square tube provides the basis for setting up the plastic panel. It is crystal clear and, with a size of 1000 mm width and 800 mm height, offers exactly the right hygiene protection for separating the breathing areas of at least one person standing. For transport, the partition wall can be divided in height. The spitting protection wall has a total height of 2000 mm and offers optimal application possibilities, for example at cash registers or service counters. Adjoining workplaces can thus be easily separated from each other, while room brightness and atmosphere are only slightly affected. Documents or goods can be pushed through under the separating pane.

This stable partition offers flexibility and protection with the aim of screening standing persons and workstations from each other. The interplay of silver anodised aluminium uprights and transparent acrylic panel offers a simple exterior. At the same time, the panel can provide a high-quality barrier between your customers, patients, employees and areas. The crystal-clear acrylic panel ensures that daylight is retained in the room. It is attached to the standpipe with 3 sign grippers each. The silver anodized standpipe "Como" is held by silver powder-coated steel base plates. Such a partition wall is a practical article to provide protection at short notice and depending on the situation. By using the partition wall, the persons present can be separated not only physically. They can also be protected from each other. The wall is a separation and hygiene protection at the same time. In order to react to new situations, it can be quickly repositioned and still provide a firm stand.

General Features Poster Series LED Signage that delivers truly captivating content in any indoor environment. Advanced High Brightness Black technology, Advanced High Refresh Rate, Fast installation of panel to Light Frame, Just Signal person to install/uninstall, savin labor cost Die-Casting Magnesim frame design. All Front Services Light Weight Faster Cooling Advenced and safety Lock Nova Star Controller indoor Space Black ​​ Mechanical / assembly features: ​ No noise, lower power consumption, good heat dissipation. Hot swapping of the back panel to replace PSU & electronics Fly bar for both hanging and ground stacking Corner protection for safe transport in case ​ Components/Electronic features: ​ Premium components​ Black mask for superior contrast and rentability Standart - Pro 16 Bit / Plus 18 bit+ greyscale (4x high than market average) Rotation function enabled IP powerCon in/out IP dataCon in/out CE, EMC, LVD approved

Would you like to get your plastic bottles, promotional items or other products printed? For over 20 years our customers can rely on the highest quality, the best consulting and the optimal quality-price ratio.

These precision and small parts are used in printer accessories.

Precision and complex machining.mask the hole and thread and then procedure in anodize.

AViTEQ Dewatering screens are designed as linear vibrating devises for drainage of sand, plastic granules, kieserite, limestone, etc., even to depart insoluble contaminants from wash water or carrier liquids. Advantages & benefits double, specific screening performance of linear vibration with respect to flat screening easy replacement of screen decks low height Construction The design of the screen, depending on the requirements, in single or multi-deck construction. Possible drives are magnetic vibrators, unbalanced motors, exciters and circular vibrators. Dewatering screens are generally designed with top-mounted drives. Selection The sizing depends on: the material to be drained properties of the bulk material, such as bulk density, grain shape, size, size distinction Key figures The dimensions are determined by the task. Previously executed dimensions: length: up to 5,000 mm width: up to 2,800 mm throughput: up to 200 m³/h drives: magnetic vibrator, unbalanced motor, exci

AViTEQ-Vibrating Circular motion screens divide into several bulk grain size ranges, seven small amounts of over-or undersize or separate from impurities and foreign matter from the screenings. Vibrating screens are working with directed vibrations/amplitudes, which are selected on special product to screen, depending on the installation conditions. The screens can separate different fractions simultaneously. The choice of the screen size and dimension depend on the task. Advantages & benefits low operating costs, high operational safety, long service life good value for money compact design dust-proof design possible low wear different possible screening performance, depending on size and design different possible meshes and screen shapes possible different possible screen materials (PU, spring steel, stainless steel, wedge-wire screens, perforated plates, etc.) Construction The main components are: strainer with drive traverse strainers / cassette or tensioned version mechanism

AViTEQ-Vibrating screens are robust, durable, bulk material adapted heavy workers, which are used as discharge units with integrated screening function below a silo, hopper or bunker or as functional organs to feed belts or crushers. Depending on the task, the devices are designed with a robust inlet area with liners (wearing plates) followed by two or three bar grate levels. Each rod is made in a tapered shape which results in a widening gap and bulk jams are avoided. The areas to use such strainers are the primary industry, stones, earth, coal industry with grain sizes up to 1,000 mm in length, but also the chemical and food industry. Everywhere, where a roughly screening and separation of fine and gross material is needed. Advantages & benefits Wide range of applications: product to feed screening of gross grain separation of gross grain before classifying separation of fine grain from crushers protection screening in front of conveyor belts Construction The main components ar

The extremely space-saving design of our screen changer allows a lot of creative freedom, both with new machines and in the case of retrofitting, since the structure of the extruder platform only needs to be adjusted a little. The screen changer is installed instead of a connection piece and can be equipped with a hydraulic or electric drive. The simplest way, however, is to use a cordless screwdriver, which makes changing bits a quick and easy endeavor. Screen changers are available for all common throughputs.

The first flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Media examples: Paints, lacquers, mineral oils, acids, alkalis, mineral oils, solvents Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface

The first flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Media examples: Paints, lacquers, mineral oils, acids, alkalis, mineral oils, solvents Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface

Electric double heat press for textile transfers. ✔ Double platen ✔ Even temperature and pressure ✔ Opens and closes automatically ✔ Up to 40x50cm base plate ✔ No compressor ✔ Laser guides This fully electric double heat press is designed for medium size productions without compressed air. Due to its electric closing mechanism, it is easy to operate without exhausting your arm. And while one side is pressing, you have time to prepare the other for the next cycle. Furthermore, a small gap underneath the base plate allows you to thread the t-shirt onto the platen. Using a small display, you can adjust temperature and dwell time to your likings. In automatic mode, the machine will automatically close and open the press as well as move it from one platen to the other based on set timings. With a range of different base platens, this press can be used for t-shirts, hoodies, bags, sleeves, legs, bags, neck tags and a lot more.

Great TPU powder for heat transfer printing. ✔ High elasticity ✔ Safe to wash at 40°C ✔ Soft feel ✔ Great price ✔ Different particle sizes available ✔ Low activation temperature ✔ Cotton, Polyester and more Our hot melt powders are tailored for heat transfer printing. With a range of different particles sizes, we have the right powder for light fabrics like t-shirts as well as for heavy materials like sports bags. With great adhesion to many materials including cotton, polyester, blends, nylon and more, you won't need to switch powders in-between. Furthermore, these hot-melt powders can be used at 110°C, which makes that a great choice for heat sensitive materials including polyester. Just sprinkle the powder in the still wet ink of your DTF (Direct to Film) or screen-printed transfer. Compatible to most available inks in the market!

Heat transfer films for easy to peel heat transfers. ✔ High ink uptake ✔ Nice, matt finish ✔ Soft feel ✔ Great price ✔ Anti-static ✔ Thermally stabilized ✔ Hot or cold peel! Our instant-peel film for DTF (Direct to Film) printing is your best bet for a safe and easy process. It comes with many layers of coating which guarantee a great ink uptake and an easy release. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after pressing or to peel it cold. The anti-static feature of this film makes sure that no hot-melt powder particle sticks to the unprinted area, giving you a clean transfer result. Additionally, the film is matt on both sides so that the print won't stick to the film once rolled up and to make sure, that it can be processed perfectly in your DTF printer and transfer press.

Heat transfer films for easy to peel heat transfers. ✔ Easy peel ✔ High-gloss finish ✔ Great price ✔ Thermally stabilized ✔ Hot or cold peel! Our release film SHIELD SR is created to be used with toner based printing technologies. The 23um thick PET film is coated with our unique SHIELD SR release coating, which add gloss and protection to your prints. Furthermore, the transfer film leaves you to choose in-between a quick hot peel straight after application or to peel it with a delay. The SR version is designed as an all-rounder, combining good resistance against cremes, water and mechanical damage. The standard core size is a 6'' core with a film length of 3000m per roll. Custom rolls can be made.

The first flowmeter with touchscreen display and backlighting convinces with its simple, demand-oriented display and operability, the multilingual interface and the compact design. Thanks to the rotating Oval gear meter and the magnets placed on the measuring wheels, it enables accurate measurement of the volume flow and at the same time measures non-flammable liquids such as alkalis, mineral oils, hydrocarbons and solvents as well as highly flammable liquids precisely, quickly and above all efficiently. * Optionally in explosion-proof design * Media examples: Paints, lacquers, mineral oils, acids, alkalis, mineral oils, solvents Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy due to overtravel correction * Low pressure losses in the system * Touch screen display with self-explanatory, multilingual user interface

Lutz Nutating Disc MeterThe first mobile flow measurement device with touch screen display and background lighting is very impressive thanks to its simple, practical display and user-friendly operation, the multilingual interface and compact design. The user guidance with plain text instructions, system messages and assistance texts as well as safety and monitoring functions virtually eliminate the possibility of errors. It can also be operated manually or by external control.

Strong, water-based adhesive disperion for heat transfers. ✔ For many materials ✔ Different application temperature ✔ Low Viscosity ✔ Great price ✔ Clear coating Our water-based adhesive dispersions are made for heat transfer printing. With different base materials from PU to acrylics, we can create the right adhesive for your applications. Our main products are the MT-I adhesive, which adheres to many materials at temperatures from 50 - 100°C with great hot tack. The second is PPT-I, which adheres to untreated polypropylene at low temperatures. The main use if in combination with toner-based prints, but they can be used with other prints as well. Once we know the application, we can help you find the right adhesive for it!

Our service to print your products using high-quality digital heat transfers. ✔ Small quantities possible ✔ 100% digital printing with CMYK and white ✔ Photorealistic 1200 dpi ✔ Great price ✔ Fast shipping Products: tubes (cosmetic, industrial), airless dispensers, flying discs, spirits bottles, wine bottles, promotional products and more. Our printing service is for everyone who doesn't own printing equipment or prefers the ease of this service. With machines to print on mandel carried products, flat surfaces as well as cylindrical products, we can offer this service for a wide range of items. Furthermore, our range of heat trasfer technologies opens us up to print not only on differend shapes, but also different materials. From PP to ABS, glass, ceramics, wood, paper and many more. Reach out to us with your product or idea and we will come back to you with an honest answer.

Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 80 - 100°C ✔ All-purpose adhesie Our V-6 hot melt dispersions is tailored for heat transfer printing. With a medium activation temperatur it can be used also on lots of different materials. The adhesive forms very flexible film that make it a good partner to be used on flexible materials. It can be used well with toner-based prints. The formulations creates good adhesion on many materials, which makes it an all-rounder. It shows good overall resistance without any mayor strength or weakness. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.

Strong, water-based adhesive disperion for heat transfers. ✔ Flexible film ✔ Hydrophobic ✔ Low Viscosity ✔ Great price ✔ Clear coating ✔ Application temp.: 50 - 80°C ✔ For untreated PP (polypropylene) plastics and PET Our PPT-I hot melt dispersions is tailored for heat transfer printing. The formulation is tailored for untreated PP plastics. It also provides a low activation temperatur and a good hot-tack. Due to this it is easy to achieve great bonds on this difficult material, even at higher speeds. It can be used well with toner-based prints. This adhesive is great for heat transfer printing onto cosmetic packaging as well as promotional and industrial products made of PP. It shows good resistance against water, alcohols and cremes. Furthermore, the particles in this dispersion are fine dispersed and result in even and repeatable results.