Sampling - Import export

The sample containers sterile are sterilised by irradiation and correspond to a sterility assurance level Sterile SAL 10-3 (according to ISO 11137) inside. The handy and universally applicable sample jar is easy to fill, smooth-walled and free of undercuts, therefore it can be emptied completely. It is an excellent universal container for all liquid and solid contents. The attached lid of the sample container can be opened with one hand and fixed at a 90° angle. This leaves the other hand free to take samples. Liquid/condensate in the lid runs into a collecting channel integrated in the lid, nothing is lost, nothing can drip off. The sample boxes are closed while hot during production. Due to this process, the sample boxes close absolutely tightly, as the lid and box adapt optimally during the cooling process. The sample container made of PP is highly transparent, the contents of the container can be easily recognised.

To make a sampling procedure reproducible, it should always be carried out under the same conditions. For this purpose, the depth stop for samplers is a helpful accessory. The depth stop can be clamped to any height of the sampler by means of a C-clamping screw. This ensures that the sampler penetrates to the same desired depth each time it is pierced. The penetration depth is thus fixed and can be precisely recorded, e.g. in a test report or sampling instructions. In addition, the depth stop can prevent accidental puncturing during sampling. The depth stop for samplers is useful in all areas where the sampling parameters must be precisely determined and defined, e.g. in the outgoing and incoming goods inspection of bulk materials that can segregate. Simply attach the depth stop for samplers to a sampling tube with Ø 25 or 50 mm and tighten with an Allen key (5 mm).

With Novartos Multi double sampling, a double multi-point sample can be taken from multiple predefined sample zones. Depending on the lenght, four, seven or nine sample chambers are each fitted with two sample inserts for the double sampling.

With Novartos Multi triple sampling, a triple multi-point sample can be taken from multiple predefined sample zones. Depending on the length, four, seven or nine sample chambers are each fitted with three sample inserts fot the triple sampling.

The Powder Sampler Mini is a stainless steel sampler for small quantities. When the button is pressed, a sampling rod enters the sample material and retracts when released. In this way, a fixed amount of sample material is enclosed in the sample notch of the rod and removed. The sampler precisely collects 0.01 ml, 0.05 ml and 0.1 ml sample volumes, depending on the version. With an insertion depth of up to 300 mm, multiple target point samples can be collected at different depths. The small-volume powder sampler is made of high-quality stainless steel 1.4404/1.4571 (316L/316Ti). The Mini powder sampler is used for sampling powdery products from small containers, sacks, drums or open containers. Primarily in the pharmaceutical, medical products and biotechnology sectors, e.g. for testing raw materials, active ingredients and excipients.

Samples, prototypes and small series made of sheet metal Laser cutting, embossing and bending or punching including electroplating. Prototypes and small series - everything from a single source! We manufacture your individual sample parts, prototypes and small series mostly without any proportionate tool costs. This means that we are very flexible, efficient and cost-effective even with small quantities - in extreme cases from a quantity of 1. This is made possible by our modular bending kit. Everything from a single source: • raw sheets in stock • Laser fine cutting also from pre-punching tape using camera calibration technology • Embossing, bending, folding, pressing • Punching of functional areas • Progressive punching of medium quantities, depending on economic efficiency • Module assembly • CNC laser welding • Complete or partial electroplating by partner.

In our laboratory we have all options to supply you with tests, parts analysis and pre- or small batches productions. Our team of highly skilled experts will assist you, if you have any question about how to design your parts for optimal welding. In our plant in Heppenheim we have the option to do welding tests with all the welding methods we offer in order to give you the maximum reliability for your serial process.

Flaming tap for drinking water sampling (chemical and microbiological parameters) With soldered brass pipe Diameter 10 x 6 mm, 90 mm

The European Drinking Water Directive 98/83/EC describes water as our most important good and thus highlights the importance of its protection. Drinking water is of high value as it has a direct impact on human health. For drinking water installations, that means that planning, construction and operation of a drinking water system should not cause illnesses due to mistakes or errors. A regular test for drinking water is prescribed in the Directive 98/83/EC. All member states need to adopt these regulations and should have adjusted them to the state's specific needs and conditions. — made of lead-free brass for sampling all chemical and microbiological parameters — rotable around 360° — chemically and thermally desinfectable/ deflagratable — easy installation — vertical sampling in all installation positions — lead-free body — incl. adapter to 3/8" male thread

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000, except for the 1000 ml scoop), individually packaged for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The scoop with transparent cover can be closed immediately after sampling and the sterility and exclusion of contamination can therefore be safeguarded. Ergonomics were particularly important to us for the design of the sample scoop. The scoop stands horizontally due to the special handle design and the slightly angled front edge and can therefore be put down without the sample material trickling out.

The SteriPlast® sample scoop made of polystyrene is produced and assembled in our clean room of class 7 (10,000), individually packaged for disposable use and then sterilised by gamma rays. The sample scoop is ideal for powders, granulates and pastes. The scoop with transparent cover can be closed immediately after sampling and the sterility and exclusion of contamination can therefore be safeguarded. Ergonomics were particularly important to us for the design of the sample scoop. The scoop stands horizontally due to the special handle design and the slightly angled front edge and can therefore be put down without the sample material trickling out. – White, white bio, blue or blue detectable – Disposable, optionally sterilised

The core sampler can be used to take samples of bulk materials which can easily become stuck or settle during sampling due to their particle form. In comparison to standard all-layer samplers for bulk materials, the two-part core sampler has no gap dimensions in which the medium can become stuck while it is being removed. This makes it possible to take a proper sample of powders and granulates through multiple layers, for example glass balls or metal powders. Depending on the size, the stainless steel sampler can be used for a wide range of different containers, for example big bags or small containers. The bulk material sampler takes a representative core sample and is ideal for use in various laboratory and industrial applications.

The SteriPlast® sample spoon made of polystyrene is produced in our clean room of class 7 (10,000), individually packaged for disposable use and then sterilised by gamma rays. The sample spoon is available in two sizes, 2.5 ml (similar to a teaspoon) and 10 ml (similar to a tablespoon), and is ideal for sampling powders, granulates and fluids.

Novartos Uno sampler with two or three sample chambers, for one sample zone. Novartos the Pharma zone sampler for sampling according to FDA guidelines for Unit-Dose-Sampling. It is now possible to withdraw a double- or triple-sample without inserting the lance repeatedly into the bulk material. Mixing is mainly prevented in this way. One significant advantage of Novartos is the easy cleaning. Complete filling and emptying of sample chambers has been improved substantially using computer-optimised geometry. There are no crevices or dead spaces where sampling residues can collect.

The sampling set SteriPlast® Kit consists of ten sample spatulas or ten sample scoops and ten SteriBag Premium tamper-proof sample bags. Thus the SteriPlast® Kit is the ideal combination for sampling where purity and sterility is essential. All parts are sterilised by gamma rays and suitable for use with foodstuffs. The scoops or spatulas are clean room manufactured and individually packed. The sample bag SteriBag Premium has an integrated sealing and is liquid-tight. A unique tracking code on both the bag and the tear-off field guarantees complete documentation and traceability. SteriPlast® Kit including scoop 50 ml or spatula 150 mm insertion depth, and SteriBag Premium 300 ml.

The spoon with curved spoon bowl is suitable for a wide range of different media including powders, granulates, pastes and liquids. The angled spoon shape is also good for reaching into the corners of a container. The long handle of the plastic spoon makes it possible to empty residue from large containers easily and can also reach into places that are hard to reach such as jerrycans with narrow necks. The sampling spoon can be used in pharmaceutical applications, in the chemical industry and for food and cosmetics. – White, white bio, blue or blue detectable – Disposable, optionally sterilised

With the EASYPRO CS, you get a configurable system. This customised solution is ideal for industrial applications and saves costs as only the required components are installed. The design of the base plate allows the CS120 to be used in combination with up to three other measured variables in the water. The integrated TOPAX® MC multi-channel controller continuously measures the water parameters and keeps them within the target range. It controls a large number of actuators and final control elements and is simple and intuitive to operate. Components of the EASYPRO CS (mounted on base plate): . Multi-channel controller TOPAX® MC . Measuring cells and measuring cell fittings . Sample water filter . Flow monitor . DFR 45 flow controller with temperature sensor and sample water tapping point . Inlet and outlet tap . Holder for buffer solutions and buffer solutions for adjusting the measuring cells . Multicoloured LEDs

With laser generation, components are built up layer by layer from powdered metallic materials used in serial production such as 1.2709 steel or 1.4543 steel. Thanks to state-of-the-art technology, this enables us to transfer your computer-generated 3D/CAD models reliably over to their physical form. Here, thin coats of the powder materials are applied to a base object before being melted using a laser into the desired contour. This process is continued on a revolving basis until the workpiece is complete with the final geometric form and the relevant functional properties. Incidentally, we reclaim excess powder material during this process and use all of it for later productions again. Our services in sample development also include technical springs, which we produce in small batches for your sample application. Traditional sample development services are a new addition to our portfolio. Here, we produce a small-scale series of your bent strip parts from original materials.

Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required, meeting the following criteria. Combining over 30 years of experience and the deployment of our proven single-shaft shredder, ERDWICH has developed an automated, integrated system that sets new standards in the areas of sampling and process reliability. Utilise market-leading ERDWICH technology to ensure your success in the substitute fuels sector. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!

Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. With primary fuels and finite resources subject to continuous price increases, the significance of substitute fuels continues to rise unabated. For plant operators, this offers first-class potential and attractive prospects for the future. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required. System criteria: To satisfy these requirements while ensuring optimum process reliability, you need a partner who possesses long-standing expertise and manufacturing proficiency.ERDWICH is that partner. Combining over 30 years of experience and the deployment of our proven single-shaft shredder, we have developed an automated, integrated system that...

Based on your ideas and in close collaboration with your specialists, PRUFREX takes part in the development of your new products. In the shortest possible time, we are able to supply you with individually produced prototypes and functional models. We use 3D printing technologies to efficiently produce mechanically functional device models. We know how important functionally correct sample products are in the early phases of your product, as are impressions of the look and feel of the device as a whole.

Pendulum cup made of stainless steel V2A (1.4301) with extra-long, closed handle. The sample cup has no openings or undercuts up to an immersion depth of approx. 500 mm. The closed design of the shaft makes the scoop cup particularly suitable for sampling well water, sludge, waste water, liquid manure or similar. The sampler is particularly suitable for taking samples from basins, tanks, shafts, open bodies of water, etc. With the length-adjustable telescopic aluminium rods, sampling depths of up to 6 m can be achieved. The TeleSchöpfer telescopic rod with tools is a versatile sampling system. The interchangeable tools (angle cup, pendulum cup, bottle holder, stainless steel cup and landing net) are suitable for a wide range of applications. The tools are firmly connected to the telescopic rod by a practical snap connection.

The industry standard for test reliability Our pregnancy and ovulation wicks deliver proven performance and reliability. As the industry standard for home pregnancy and ovulation testing around the world, our products are optimized with precise capillary action, high purity and proprietary color change technology to: Improve sensitivity and specificity of pregnancy and ovulation rapid tests–Customized geometries and material formulations create a capillary structure that optimizes wicking, absorption and controlled delivery to the test site quickly. Provide method assurance and sample indication – Visual and physical indicator technology can be engineered to meet specific test platform requirements. Minimizes non-specific binding–Proprietary materials and manufacturing help generate components that provide higher recovery of analytes and is pH “agnostic” to handle a wider range of samples. Features Ideal capillary structure and controlled delivery of sample to test...

The stainless steel scoop can be used for taking samples of powders, granulates and pastes. Made of stainless steel V2A (1.4301), the material is sterilisable and autoclavable. The rustproof stainless steel scoop has a smooth, high-gloss polished surface and is food-safe.The tubular shape makes it easy to immerse the scoop in the medium being sampled. The high sides prevent the sample from trickling out. The round handle offers a good grip. The sturdy scoop is ideal for chemical, pharmaceutical, animal feed and food applications.

Precise recovery of all drugs-of-abuse Ensure safe collection, absorption and release of samples with our drugs-of-abuse media. Tailored with customized wicking and absorption properties, along with the ability to be shaped and flavored, our drugs-of-abuse media: Deliver precise recovery – Customized surface energy reduces oral viscosity to enhance test sensitivity. Reduce test cost – Minimal use of materials and buffers due to customized materials capabilities Assure method and sample indication – Our proprietary technology offers visual and physical indication and minimizes non-specific binding, resulting in higher recovery of target analytes. Features Customized surface energy - Outstanding recovery of Drugs-of Abuse - THC, PCP, Opiates, Amphetamines, Cocaine Reduces oral viscosity Can be customized for shape and flavored for pediatric use Minimize use of buffers Low concentration Non-abrasive/compressible Materials Offered Advanced porous materials (PE, PP) Porous polymeric...

Immersion cylinder for sampling crude oil, liquid mineral oil products, fuels, special and test fuels, fuel oils, petroleum and liquid lubricants in Explosion Categories IIA, IIB and IIC. Completely made from non-spark producing materials, nickel-plated. Dipping containers are used in various areas to collect liquids for sampling. Bürkle produces the most comprehensive collection of dipping containers by a long way, the right product for every use as it were. Bürkle offers dipping bottles and immersion cylinders for sediments, for the area of environmental issues, for chemically aggressive products, for petrochemistry, for the ex protection area etc. The dipping bottles for the Ex protection area are made of nickel-plated brass, therefore they do not oxidise.

The SiloPicker is ideal for taking bulk goods samples from silos. Using the extension rods, samples can be taken from depths down to 3.5 m. The insertion depth depends on the density of the bulk goods.

LiquiSampler for liquids, according to DIN EN ISO 15528. Made of ultra pure and chemically inert PTFE/FEP or PP for contamination-free sampling. Sampling from open and closed containers, barrels, tanks, silos, water courses. Suitable for all commercially available barrels and containers with opening of at least 32 mm in diameter. Easy cleaning - all surfaces are free of pores and crevices, preventing accumulation of dirt. Only round screw threads proven in foodstuffs hygiene are used. Disassembly and cleaning are extremely simple.

ViscoSampler with powerful suction for viscous media. The media is drawn up and discharged using the suction flask. Made of ultra-pure, chemically inert PTFE/FEP for contamination-free sampling. Specially developed for viscous substances such as slurries, silt, wet clay and soil samples, soil sediments, oils, emulsions, creams etc. Easy cleaning - all surfaces are poreless and without crevices. Dirt accumulation is prevented. Only round screw threads tried and tested in the field of food hygiene are used. Disassembly and cleaning are extremely simple.