• europages
  • >
  • COMPANIES - SUPPLIERS - SERVICE PROVIDERS
  • >
  • rolled steels

Results for

Rolled steels - Import export

GermanyManufacturer/producer

Germany

Verified by Europages

State-of-the-art technology and extensive knowledge in the processing of steel characterise our location in Bad Salzungen, Germany. For us, performance means a wide range of cold-rolled steels of the highest quality at competitive prices, flexibility and a high degree of readiness to deliver while adhering precisely to the specified chemical and mechanical values. Surface finishing by electrolytic galvanizing and/or subsequent customisation of your goods are possible for us. We offer all our customers spooled materials with volumes of over 200,000 metres of metal strip per spool. This further development means a considerable advantage for our customers. Personnel-intensive set-up times and machine downtimes are avoided.

Request for a quote

Germany

Verified by Europages

This material group comprises C-steel with low carbon content, good formability and fineblanking quality. Due to case hardening, the components have low-wear surface layers with high hardness and sufficient toughness in the core. They thus combine numerous properties and application possibilities in a wide variety of industries. To increase the wear resistance, you can also carburize or carbonitrate partial areas. C 10 E, C 15 E /➔ according to DIN EN 10132 - 2 Depending on the customer's requirements, we supply treatment states from soft annealed to high cold solidified.

Request for a quote

Germany

Verified by Europages

Cold rolled strip is used in a variety of applications. It meets high demands on forming behaviour, dimensional tolerances and surface finish, which offers our customers decisive advantages! HFP cold rolled strip is ideally suited for all stamping, bending, drawing and deep drawing purposes. From ball bearing housings to roll cutting and punching strips, hose clamps, headlight reflectors, electrical equipment, office supplies and tubes to safety parts of all kinds, a wide variety of components can be manufactured for various industries. DC 01, DC 03, DC 04 according to DIN EN 10139 / mild steel - St 37/ special grades on request Depending on the customer's requirements, we supply treatment states from LG to C690.

Request for a quote

Germany

Verified by Europages

direct mounting to our Gripper Feeds, series ZVTMB or similar products with mounting bracket very costeffective flattening of the coil set best results through adjustment of both top straightening rolls rolls made of special steel and hardened and ground

Request for a quote

Germany

Verified by Europages

Our universal cranes give you the certainty of quality, efficiency and reliability at the highest level. Every crane and every crane component reflects decades of crane expertise and reliability as a partner for the industry. Our product portfolio includes single and double-girder overhead travelling cranes and suspension cranes. Besides universal cranes with welded box-section girders, we also offer solutions with rolled steel sections. Our wall-mounted travelling cranes and crane sets, which are tailored to meet specific customer needs, round off our range. With our assistance and convenience functions, our cranes provide safety and support during operation.

Request for a quote

Germany

Verified by Europages

The high-performance and extremely flexible intermittent Form Fill and Seal machine flexo H is particularly suitable for film packaging of wood and similar long parts from 800 mm in length, such as parquet or laminate, mouldings, wood or laminated wood, furniture parts or doors. It takes just five minutes to deal with a pallet of laminate. Similarly, our flexible packaging machines are ideal for similar length products, including skis and snowboards, spirit levels, rolled goods, steel pipes, and many more items.

Request for a quote

Germany

Verified by Europages

Rolled composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET/B is a versatile, corrosion-resistant dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! For technical details, please visit the product page on our website!

Request for a quote

Germany

Verified by Europages

Rolled composite plain bearing steel / PTFE coated | Maintenance-free dry plain bearing | DIN 1494 / ISO 3547 TEF-MET is a versatile dry sliding bearing with PTFE sliding layer. Therefore, no lubrication is necessary. However, additional lubrication is possible in principle! For technical details, please visit the product page on our website!

Request for a quote

Germany

Verified by Europages

• For fixing reinforcement steel with binding wire from a roll • Fast, reliable and cost-effective drilling and cutting of the wire in a single operation • Cutting edges inductively hardened • Handles coated with plastic • Made of tool steel, forged, oil-hardened

Request for a quote

Germany

Verified by Europages

• For fitting internal circlips in holes • With straight jaws • With exchangeable tips made of special steel • Anti-slip, twisted precision tips • With retainer • Handles made of solid rolled steel

Request for a quote

Germany

Verified by Europages

• For fitting extarnal circlips on shafts • With 90° angled jaws • With exchangeable tips made of special steel • Anti-slip, twisted precision tips • With retainer • Handles made of solid rolled steel

Request for a quote

Germany

Verified by Europages

• For short, straight and figure cuts, small radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

Request for a quote

Germany

Verified by Europages

• For short, straight and figure cuts, large radii • Special cutting geometry and precision cutting for a clean cut without any burrs • Cutting edge hardness 60-62 HRC • Micro-serrated cutting edge prevents slipping off during cutting • Re-adjustable screw-joint • With optimum leverage for easy and effortless work • With opening spring and catch • Handles made of solid rolled steel • Ergonomically multi-component safety handle for better handling • Made of tool steel, forged, oil-hardened

Request for a quote

Germany

-suitable for charging retention basins, depots for hazardous materials, drum stacking pallets etc. -with a towing bar -swivel castors Ø 180 mm, fixed castors Ø 80 mm -Type FHR 600 G for steel bunghole drums, steel drums with a lid, steel rolling hoop drums, plastic l-ring drums, plastic double l-ring drums, plastic drums with a lid, rectangular drums and conical drums with a lid ranging from 110 to 220 litres also open drums -individual construction on request: e.g. stainless steel for “ex”-zones in compliance with “ATEX 95”

Request for a quote

Germany

Toilet roll holder with one concealed reserve roll in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; all corners fully welded, visible surfaces satin finished and brushed. Designed for two standard toilet rolls, including one concealed reserve roll, which drops down automatically. Inspection slot to indicate fill level. Accessible for refilling through lockable front flap. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material. Dimensions 148 x 348 x 150 mm

Request for a quote

Germany

Fourfoldtoilet roll holder in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Designed for four standard toilet rolls, three of them concealed reserve rolls, each dropping down automatically. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material. Dimensions 353 x 350 x 120 mm

Request for a quote

Germany

Large roll dispenser in stainless steel (AISI 304) for surface mounting. Allstainless steel housing; visible surfaces satin finished and brushed. Designed for one standard large roll. Spring pressure plate to prevent unintended unrolling. Inspection slot to indicate fill level. Accessible for refilling through lockable, hinged housing. Keyed alike cylinder lock in corrosionresistant zinc diecasting. Delivery includes fixing material. Dimensions 353 x 350 x 120 mm

Request for a quote

Do you sell or make similar products?

Sign up to europages and have your products listed

Add my business

Germany

The BFI shapemeter rolls that we produce under licence from the VDEh-Betriebsforschungsinstitut (BFI) have a solid roll body with a homogeneous steel surface. They are normally installed instead of the existing deflector rolls. For the measurement of wedge-shaped strip, Vollmer offers a special solution that is also based on the BFI patent. It ensures that the flatness of the strips is measured correctly even though transversal stresses are created in the strip during coiling. Individual adaptation With individually manufactured diameters between 200 and 500 mm it is possible to precisely replace the deflector rolls in practically all mills. The outer surface of the roll body is absolutely homogeneous and can be reground on all standard roll grinding machines. The width of the measuring zones can be freely selected above 17 mm. The number of measuring zones that the roll should have is determined individually.

Request for a quote

Germany

Our cold-rolled steel strip is mainly used where particularly high requirements have to be fulfilled: -Quality - Dimension tolerances - Mechanical technological properties - Structural compositions - High-quality surfaces As a long-standing partner of the automotive industry we have for decades provided a considerable amount of our cold-rolled steel strip to renowned international automotive manufacturers and their sub-suppliers. There our material is reshaped using punching, bending, drawing and deep-drawing processes. Another important sector of our clients are renowned manufacturers of safety components, electrical equipment, pipes, profiles, pressure vessels, nuclear plants and manufacturers of a wide variety of other industrial products. They all appreciate our comprehensive selection and combination of technical processes and working materials. We support our clients’ product development. With efficient manufacturing processes, the continuous further development of our technologies, broad range of services and comprehensive consulting expertise.

Germany

With our own plant at Hagen we finish the basic material for our clients. Electrolytically galvanized in matt or glossy finish and, if required, subsequently phosphated and/or chemically passivated. In addition we can chemically phosphate in accordance with the bonding process. The technological properties of the carrying strip are completely retained during this process. Hence the primary material and the surface finishing produce a high-quality material, which you can easily process and use for many purposes. Details of the properties: - High corrosion-resistance - Best painting capabilities - Decorative appearance - Uniform, homogenous layer thicknesses (1-15 my / side) - Low reject rates - No longer high unit finishing costs - Avoidance of environmental problems - Good deep-drawing behaviour

Germany

Stainless, acid-resistant, heat-resistant: no wonder that many clients rely on our THENOX® precision steel strips. The premium flat product made of corrosion-proof stainless steels is produced from hot-rolled steel strip in a cold rolling process. In detail: Through the main alloy element, chrome, a protective layer of chrome oxide is formed on the surface of the austenitic, ferritic and martensitic steels: this gives the material a permanent metallic appearance. Even in chemically aggressive substances. Other carefully alloyed elements, such as nickel, molybdenum and titanium, improve the corrosion resistance and – depending on the alloy – give the different types of steel the required technological properties: for instance good deep-drawing, bending or punching capabilities, or increased elasticity values. We roll steel in thicknesses from 0.05 to 1.50 mm with widths from 3 to 650 mm.