Results for
OKS SPEZIALSCHMIERSTOFFE GMBH
Germany
For fast determination of thermally-dependent interruptions in electrical circuits or components Avoidance of heat damage when soldering electrical components For heat protection of neighbouring components Shrinking of inner parts for removal of seized taper plugs, pins, plugs or bearing bushes Generation of shrink seats for assembly of inner parts For rapid temperature adjustment during materials testing For simulation of cold-starting conditions with motor-vehicle automatic starting systems Advantages and benefits Highly effective due to outstanding undercooling effect Excellently suited for simple cooling of parts Immediate cooling of smaller surfaces or parts down to –45°C depending on spraying duration Evaporates very quickly without residues Also provides good cleaning effect No negative affects on plastics and insulating materials
Request for a quoteERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
Several million scrap refrigerator units are disposed of every year in Germany alone. The proportion of refrigeration units recycled by volume totals about 40% and is the most significant segment after consumer electronics. One particular challenge in this recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. The fact that pre-processing of legacy refrigeration units always needs to be carried out in accordance with the latest technological standards means that plant operators gain a decisive advantage when working with an innovative and experienced plant manufacturer. With ERDWICH, you are assured of the latest technologically advanced solutions – even for the most demanding and safety-conscious refrigerator recycling. The...
Request for a quoteERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
One particular challenge in the refrigerator recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. With ERDWICH, you are assured of the latest, technologically advanced solutions: Whether you’re handling small-scale units or complex refrigeration plant: utilise the expertise we’ve gained in processing over 30 million refrigerator units. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!
Request for a quoteNOVELIS DEUTSCHLAND GMBH OHLER® - FLEXROHRE
Germany
The versatility and benefits of aluminum parts for home appliances are now a common feature of kitchens – ovens, refrigerators, dishwashers, coffee makers, pots and pans – adding elegance to everyday life at a lower price point. Industrial aluminum used in household appliances is easy to clean, thermally conductive and resistant to dents, marks, scratches and corrosion. Aluminum is especially suited for the design and construction of refrigeration systems. Aluminum refrigeration transmits heat rapidly, facilitating the cooling process and guaranteeing highly efficient operation. Some of the biggest names in refrigeration worldwide use Novelis’ aluminum products in painted, brushed, plain or embossed form.
Request for a quoteTROTEC GMBH
Germany
TTK 72 E COMFORT DEHUMIDIFIERPerfect dehumidification for large living and office spaces Absolutely low-key on the outside, the TTK 72 E has enormous power reserves. With up to 24 litres per day the ideal partner when it comes to keep living and office spaces of about 50 m² reliably dry. Through the built-in LED, the unit indicates the current humidity status in the room. The colour LED on the TTK 72 E instantly indicates if the room humidity is okay: whether the LED on the front of the unit is blue, green or red depends on whether the humidity is above or below 55 %. The LED is blue when the room humidity falls below 55 %. It is green when the humidity is within the optimum range between 55 and 70 %. Red means the room humidity has increased to above 70 %.
Request for a quoteTROTEC GMBH
Germany
Industrial condenser dryer DH 60 Extremely effective and robust dehumidifier with powerful, air circulating, double-flow radial fan Protection against moisture at its best The DH 60 is perfectly fit for fully automatic, hygrostat-controlled continuous dry keeping applications, for its distinctive German industrial design immediately suggests that this is a professional industrial dehumidifier originally produced by Trotec, developed and manufactured according to the highest of quality standards in Germany. Upon delivery this industrial condenser dryer comes prepared for wall mounting, it automatically regulates the humidity to an ideal level at which corrosion, condensation and mould stand no chance and impresses with a high dehumidification performance even at low temperatures without exception.
Request for a quoteTROTEC GMBH
Germany
TTK 120 S is well designed, solid, reliable and powerful . It is equally well-suited for use in large rooms and workshops or storerooms and smaller warehouses. It has a solid housing made of a composite of metal and synthetic material. It can extract 35 litres of moisture out of the air a day and protect your property and possessions effectively and reliably against moisture and corrosion. The TTK 120 S operates in hygrostat-controlled automatic mode and is equipped with a hot-gas defrosting mode which makes it effective and efficient. This feature allows it to be operated non-stop without supervision in rooms or offices. The antibacterial filter effectively frees the ambient air of fluff, dust or pet hairs. This product is the result of highest level of workmanship which speaks for its high quality.
Request for a quoteTROTEC GMBH
Germany
Industrial condenser dryer DH 15 The perfect solution for commercial dry keeping applications and ideally suited for rooms open to the public or with staff coming and going Easily outdries the competition with their back to the wall Characterizing features of the DH 15 include not only its distinctive German industrial design, stylish, minimalist, for maximum solidity, but also a high dehumidification performance even to low temperature ranges, technically brought to perfection for continuous operation with minimum maintenance effort. A professional industrial dehumidifier to the core, originally produced by Trotec, having been developed and manufactured according to the highest of quality standards in Germany. The DH 15 is a cost-effective solution for fully automatic humidity control in small and unheated business rooms by means of hygrostat control.
Request for a quoteTROTEC GMBH
Germany
The TTK 90 E humidifier comes with advanced features in an attractive housing. The power storing capacity is immense and allows it to perform brilliantly even when drying larger rooms. An integrated hydrostat puts the settings into practice automatically and regulates the performance of the compressor and the two-stage fan. Apart from this, the temperature and moisture values of the room air are displayed on the operating console of the TTK 90 E. The option of timer is also provided. For non-stop operations in unsupervised rooms like holiday accommodation or on boats where it is not always possible to empty the water tank manually, TTK 90 E is quite useful because of its separately integrated outlet to allow the condensate to directly drain off via hose. Benefits in practice: Hygrostat control with real-value humidity selection Digital display of current humidity and temperature values Selectable full automation or permanent operation Timer function Two fan stages
Request for a quoteTROTEC GMBH
Germany
TTK 120 E Dehumidifier The TTK 120 E combines trendy design with advanced dehumidification technology in a durable housing construction. Thanks to its robust housing made of stainless steel the TTK 120 defies even the harshest application environments. This makes it to be a flexible dehumidifier from keeping dry living areas, archieves, store rooms as far as drying up after water damages. The change from one operation location to another can be easily achieved due to steering wheels and bar handles on both sides. Special features: SuperDry function (permanent drying) Automatic hygrostat controlled dehumidification Easy-care material combination with an eye-catching look Electronic automatic defrost Warning lamp: to indicate that the water tank is full Overflow protection with auto power off Carry handles, swivel casters Connectivity for an extern condensate drain
Request for a quoteINFICON GMBH
Germany
The Most Powerful Refrigerant Recovery Machine Available with the Best Warranty in the Industry The new Vortex® Dual combines the proven capabilities of previous Vortex instruments with new extended features to give you the fastest, smallest, and easiest to use refrigerant recovery machine yet. Vortex® Dual sets itself apart by offering a full 1 HP dual piston compressor for the fastest recovery speeds available under real service conditions. A unique micro-channel condenser combined with an oversize fan helps lower discharge pressures resulting in sustained speed in the hottest ambient temperatures.
Request for a quoteTROTEC GMBH
Germany
COMFORT DEHUMIDIFIER TTK 52 EDiscreet on the outside, convincing values on the inside The dehumidifier TTK 52 E might look inconspicuous, but will impress you with its technical equipment and easy handling straightaway. Like almost all dehumidifiers of the HomeComfort series it comes with an automatic hygrostat-controlled dehumidification system including a compressor that switches itself off to save energy as soon as the desired humidity value has been reached. Conversely, the device is automatically activated again once the humidity value is exceeded. The desired humidity level can be set to target values of 40, 50 and 60 % RH via the LED-illuminated control panel. Alternatively, the TTK 52 E also allows for operation in continuous mode including unattended continuous operation – for instance, to keep smaller basement rooms or holiday apartments permanently dry. For this purpose, the device is fitted with a connection for an external condensate drain.
Request for a quoteTROTEC GMBH
Germany
The TTK 122 E allows for easy transport of bar handles and steering wheels on both sides. The operating comfort is not affected adversely by the solid design. Membrane keys that the operating panel is equipped with is easy to clean and the desired air humidity for example, can be a direct input through the digital display. The selection switches with only one less value are energy saving giving an advantage that is practical in comparison to other dehumidifiers that are analog controlled. The TTK 122 E has a display that can show the dominant air temperature during the function of climate control. It works with full automatic performance as an alternative to the TTK 120 E. For accelerated textile drying it disposes a super-dry functionality. When it comes to wet laundry, carpets, or cloth it is especially practical for faster dehumidifying.
Request for a quoteTROTEC GMBH
Germany
COMFORT DEHUMIDIFIER TTK 71 EReliable dehumidification solution with timelessly elegant chic With its timelessly elegant chic this dehumidifier blends in with any living or work space atmosphere. But the TTK 71 E is not only an eyecatcher in appearance, its technical qualities are equally impressive: State-of-the-art dehumidification technology with electronic hygrostat control and automatic defrost, flexible two-stage fan, timer function and digital display with real-value humidity selection ensures an effective, energy-saving dry keeping of living and office spaces or heated basements in fully automatic dehumidification operation. The slip-resistant rubber feet of the TTK 71 E provide more than just stable positioning, they also reduce additional vibration-related operating noise to ensure agreeably silent dehumidification in your rooms.
Request for a quoteTROTEC GMBH
Germany
COMFORT DEHUMIDIFIER TTK 95 EProfessional drying solution for large living and office spaces It keeps rooms sized up to 90 m² dry in a reliable and competent manner. In doing so, it condenses up to 30 litres of moisture from the room air each day. The hygrostat-controlled automatic dehumidification works hand in glove with the target value preselection between 30 and 90 % RH adjustable in increments of 5 %. As soon as the desired humidity value has been reached, the automatism switches off the compressor to save energy – and back on when the humidity value is exceeded once more. Meanwhile, the fan keeps running and the indication on the digital display remains active as well. That way, the current relative humidity can be checked at any time. The air circulation can be optimally adjusted for every type of room by means of two fan stages, swing function for an even air distribution as well as the adjustable air discharge direction.
Request for a quoteTROTEC GMBH
Germany
TTK 53 E COMFORT DEHUMIDIFIERConvincing dryer performance paired with functional elegance The TTK 53 E provides all functions a modern comfort dehumidifier needs. However, it also has another convincing and interesting extra function. On the front, there is a colour LED so that you instantly know if the room air humidity is okay. The functional design of the TTK 53 E fits any style of furniture. With a dehumidification capacity of up to 16 litres per day, it keeps heated rooms of up to about 30 m² reliably dry. On the easy-to-clean control panel with digital display you can select from the following dehumidification modes: automatic operation with a preset humidity of 55 %, hygrostat-controlled automatic dehumidification system with target value preselection between 30 and 80 % RH in steps of 5 %, continuous operation as well as a ventilation function. The colour LED indicates if the humidity is okay
Request for a quoteTROTEC GMBH
Germany
Additionally, the TTK 30 E is provided with a whole variety of other features of the Comfort series. These include the laundry drying and the timer function. A child lock protects against accidental change once settings are selected. Moreover, the dehumidifier has a two-stage blower, an overfill protection with auto shut-off, as well as a level warning light when the water tank is full. Here are some practical advantages at a glance: Hygrostat controlled dehumidification Auto modes between 30 and 80% RH in 5% intervals Once the desired humidity level is reached, the compressor switches off automatically. The fan continues to run and if levels are exceeded the device is activated automatically. Color LED display of current humidity Display of relative humidity Laundry drying function Timer function with 2 air flow settings Level warning light at full water tank Overfill protection with auto shutdown
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
TROTEC GMBH
Germany
TTK 24 E Dehumidifier The dehumidifier TTK 24 E convinces with its dehumidification performance of up to 10 litres a day and is well suited for keeping dry small, heated rooms, for example hobby rooms. Special features: Automatic dehumidification performance Excellent design Very easy handling Overflow protection with automatic power off Washable air filter Connection for extern condensate drain Technical details: Dehumidification performance max.: 10 litres/24h Air flow rate: 100 m³/h Suitable for rooms up to: 15 m² / 37 m³ Operating range temperature: 5 - 32 °C Operating range humidity: 30 to 90 % r.F. Input voltage: 230 V / 50 Hz Power input: 0.25 kW Water tank: 1.6 litres Sound level dB (A): 42 Dimensions (l x w x h): 298 x 354 x 493 mm Weight: 10.1 kg
Request for a quoteTROTEC GMBH
Germany
COMFORT DEHUMIDIFIER TTK 100 EPowerful dehumidifier with digital control panel... The TTK 100 E is a trendy dehumidifier combining a successful design with advanced operating elements. Compared to dehumidifiers with analog controllers for the preselection of minimum and maximum operation regardless of the unit, with the TTK 100 E you can directly enter the desired humidity value via the digital display. An integrated hygrostat implements this target fully automatic and adjusts the performance of compressor and two-staged fan. Indicated on the display of the TTK 100 E, in addition to the preselected room humidity value, are the current values of the air temperature and humidity in the room. If required, this comfort dehumidifier can also be controlled via the integrated timer or used in continuous operation. Special features: Hygrostat control with real-value humidity selection Digital display of current humidity and temperature values
Request for a quoteBEKO TECHNOLOGIES GMBH
Germany
In addition to filtration, compressed-air drying contributes significantly to an increase in process reliability. Humidity in compressed-air systems causes corrosion, and promotes the growth of micro-organisms. In individual cases, condensate emerges at the point of use - an ongoing danger for the operational flow, for example because of failing pneumatic controls, increased wear and tear or because of other disturbances in the production process. With considerably enhanced process reliability, the DRYPOINT dryer technology offers decisive advantages for every field of application. The BEKO TECHNOLOGIES portfolio comprises application-optimised refrigeration, adsorption and membrane dryers for volumes up to 1,500 m³/h. This range of dryers is completed by heat-regenerated EVERDRY adsorption dryers which are designed for large volume flows up to 20,000 m³/h.
Request for a quoteSTEINSTOSSER & SCHMACHTENBERG GMBH & CO. KG
Germany
Costconscious use of resources Every year in Germany, several million refrigeratorsare disposed of . With this enormous volume, refrigerators are certainly counted among the most important recycling products. After removing the chlorofluorocarbons, in a second step the housings are broken down into their individual components – iron, aluminium, copper and plastics. These are then made available again to industry as secondary raw materials. We equip our clients with extremely tough and hardwearing shredder disks and thus contribute to costconscious handling of resources.
Request for a quoteKELVION HOLDING GMBH
Germany
The EGR Cooler, developed in close collaboration with our customers for medium and low speed engines, ensures that the recirculation exhaust-gas is mixed at the lowest possible temperature with the air for the combustion process. EGR Coolers are an essential element of EGR systems for the next engine generation which already now fulfills future emission guidelines according to IMO (International Maritime Organization), EPA (US Emission Protection Agency), EURO, etc. We have developed various cooler designs with regard to the different requirements of EGR Coolers at 2-stroke and 4-stroke engines. The patented design for 4-stroke engines high pressure EGR system enables cooling of exhaust gas, some of which are over 700 °C, down to 50 °C.
Request for a quoteKELVION HOLDING GMBH
Germany
Our range of transformers oil water coolers can be supplied in different mounting variants. The standard water cooler version is designed for direct mounting to the transformer tank. In addition, our range of products comprises free-standing transformer oil coolers designed to customer specifications. The coolers in general are used for specific types of transformers, such as furnace transformers or rectifier transformers. A further application is machine transformer cooling at hydraulic power plants. Transformer oil water coolers are available in different design versions.
Request for a quoteKELVION HOLDING GMBH
Germany
Our customized and energy modular radiators offer a rugged and reliable design. More than 40 years of experience in manufacturing all types of radiators and dry coolers guarantee a high performance solution in various applications.
Request for a quoteKELVION HOLDING GMBH
Germany
Optimization of the global efficiency of a power plant based on the Rankine Cycle, requires the incorporation of highly specialized equipment that supports the maximization of the efficiency of the steam cycle, reducing the primary energy consumption, minimizing the environmental impact and helping to optimize the OPEX and consequently the return on the investment. The highly increasing competitiveness among the different centralized electricity generation technologies and the increasing concern on environmental issues, force all the available generation technologies to improve their efficiencies, reducing the primary energy consumption.
Request for a quoteKELVION HOLDING GMBH
Germany
Transformers with forced oil cooling systems require reliable, glandless transformer oil pumps. We offer a large range of such pumps, from which customers can choose a type that suits their specific requirements and ensures optimum operating conditions. Our oil circulation pumps are of simple, straightforward design and robust construction. Due to their compact size, the pumps can be easily integrated into the oil circuit. Four pump designs are available for different applications: Power Transformer Applications Inline and angle-type pumps with radial impellers and inline pumps with propeller-type impellers. Traction Transformer Applications Pumps with radial impellers for traction transformers in rail-mounted vehicles.
Request for a quoteKELVION HOLDING GMBH
Germany
For decades we have been a leader in the development and manufacture of charge air coolers for combustion engines. Installed on thousands of diesel and gas engines these coolers are well known throughout the world for their excellent performance and reliability. We enjoy long-term collaboration with world-famous engine manufacturers and licensors for 2-stroke and 4-stroke engines. These collaborations have led to a substantial database of charge air cooler designs for different gas and diesel engine types. Our global footprint with sales agents all over the world and productions in Europe, Asia and South America guarentee our customers world wide service and technical support for all questions in combination with charge air coolers.
Request for a quoteKELVION HOLDING GMBH
Germany
A Box Cooler is a vessel water cooling system. It comprises a U-tube bundle that is fitted in the sea chest on the side of a vessel, saving space in the engine room. The sea chest is equipped with inlet and outlet grids. Cooling sea water enters through the inlet grid and flows along the U-tube bundle to the outlet grid, thus cooling the water inside the tubes. The cooling effect is achieved by the forced circulation of sea water when the vessel is moving or by natural convection when it is stationary. Box coolers can be used for a wide variety of temperature-reducing duties on a vessel, from cooling the main engines, auxiliary engines and bow thrusters to air conditioning and hydraulic systems. Kelvion Box Coolers are ideal for small and medium sized vessels, including for example: tugboats, barges, fishing boats, carriers, dredgers, supply vessels, ferries, ice breakers, cargo freighters, tankers and reefers.
Request for a quoteKELVION HOLDING GMBH
Germany
Closed circuit coolers are designed according to customers' requirements and assure exact compliance with their performance specifications. Our finned systems enhance heat exchange to the tube system and allow low material usage without performance loss. Tooling flexibility allows each system to be adjusted with its tube banks side by side or on top of each other, offers options of meeting extreme customer demands. Our many offical approvals and certifications allow us to design and manufacture closed circuit coolers for many and various applications.
Request for a quoteResults for
Refrigerators - Import exportNumber of results
52 ProductsCountries
Company type