Protectors - Import export

The modules of the IMSP series are connected before the interface devices and provide reliable protection against voltage surges. The only 6.2 mm wide DIN rail devices are IP20 rated and can be used in the Ex and non-Ex area. Among other things, modules are available for surge-protected connection of analog signals (e.g. for analog signal isolators and temperature measuring amplifiers) as well as for connecting binary signals from switches or inductive and capacitive sensors.

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral Also available as spray version OKS 341 For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.

For particularly heavy loads, normal secutex protective sleeves can only be used for larger edge radii because the heavyload round slings under load are up to 80 mm thick. According to the technical definition, this creates a “sharp edge“. Both the loadbearing round slings as well as the protective sleeve will be destroyed by the forces which occur here. The secuwave edge protector increases the load’s edge radius. The wave profile helps the edge protector adapt to the load. The castin perforated plate then permanently keeps the shape. The additional secutex protective sleeve reliably prevents the edge protector from moving through the heavyload round sling. Possible applications bridge elements, machinery, gear segments etc.

The attachment chain may only be used as an attachment accessory without edge protection if a 20% reduction in load lifting capacity is taken into consideration or if the nextlargest chain thickness is used. Otherwise, a secutex SKK hinged edgeprotector must be used. A “sharp edge” exists when the edge radius is smaller than the nominal thickness of the lifting chain. Further information is available in the “sharp edge“ chapter.

By means of a hinge, the edge protector SKB can be optimally suited to fit any load geometry. It can be optionally equipped with magnets to better retain its position on the magnetic load. The edge protector can be quickly secured to the edge of the lashing belt by means of mounting slits. The lashing belt slides through the secutex clip which remains on the lashing belt despite collisions. Optionally available Magnets for easy fixation of the magnetic load

Even when securing the load, the lashing material must be protected against the „sharp edge“. Highvalue loads may not be damaged by lashing chains or ropes. The SKBE secutex simple edge protector has a low deadweight and is easy to handle thanks to the flexible textile reinforcement. It is simply pushed onto the lashing material via the fulllength opening on the reverse side and is thereby impossible to lose. Important note the secutex simple edge protector SKBE is not suitable for prolonged use.

Even when securing the load, the wire cable must be protected from the “sharp edge“. Highvalue loads may not be damaged by wire cables. The secutex simple edgeprotector SKDE is easily pushed over the backside of the mounting slit and over the wire cable. It is affixed and can no longer be detached. The edgeprotector is simple and versatile. The corner protector has a low deadweight and is quick and easy to handle thanks to the flexible textile reinforcement.

If the load has sharp edges or has a rough outer surface, a suitable abrasion or edge protector must be used. secutex edgeprotectors are easy and versatile to use. The extremely robust secutex edgeprotectors protect the load and the lashing belts. They increase the radius of the edge and prevent “sharp edges”. The corner edgeprotector SWH for lashing belts considerably increases the radius on the corners. It is particularly robust and durable thanks to the perforatedplate reinforcement. An optional magnetic version can be easily attached to the magnetic load.

The SKDS hinged edgeprotector is a massive edge protector for cable grummets. The edgeprotector flexibly adapts to the load, increasing the radius over critical edges and distributing the lifting forces over a larger area. The cable and load are equally protected. It is available in two versions, featuring either a steel or aluminium hinge.

Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering Protected parts retain their decorative appearance, as no surface discolouration occurs Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties with lasting water-repelling Excellently suited for producing non-slip dry, greenish protective films Outstanding corrosion and oxidation protection with lubricating effect No removal prior to commissioning, as compatible with all lubricants Waterproof and resistant to weathering, suitable for all climate zones Can be welded without degreasing Easily removable before coating

Preservation of bare metal surfaces of all kinds, which are stored for longer periods and are subject to effects of weathering Protected parts retain their decorative appearance, as no surface discolouration occurs Ideal on-call and storage protection for spare parts with possibility of direction installation Advantages and benefits Highly effective due to good film-forming properties with lasting water-repelling effect Excellently suited for producing non-slip dry, greenish protective films Outstanding corrosion and oxidation protection with lubricating effect No removal prior to commissioning, as compatible with all lubricants Waterproof and resistant to weathering, suitable for all climate zones Can be welded without degreasing Easily removable before coating

Our shrink hoods and pallet covers are the ideal packaging solution for pallets, machines, appliances, large equipment and construction materials, as well as all other bulky items that need protection against dirt and other harmful influences. PE shrink hoods and pallet covers can also be used as lining for lattice boxes or other types of cartons. Dürrbeck pallet protectors and shrink hoods offer excellent protection against corrosion, moisture and more, at all times. As professionals in plastic packaging solutions, we produce shrink hoods and pallet covers to order – tailored to meet the various needs of our customers’ specific industry or goods.

Lubrication of fast-running drive chains of all designs for open or semi-open operation without a permanent re-lubricating device, such as motorcycle and bicycle chains Lubrication of hoisting chains such as multirow roller chains or stacker truck chains, as well as single or multiple flat-link articulated chains Advantages and benefits Highly effective due to outstanding creep and gap penetration properties Extreme adhesive strength Extreme wear protection through Moₓ-Active additive Very high resistance to cold and hot water as well as to saline solutions Excellent corrosion protection O-ring neutral For best adhesion, clean the surfaces mechanically first and then with OKS 2610/OKS 2611 universal cleaner. Apply OKS 340 with a brush, drip oiler, by immersion or using a suitable automatic lubrication system. Spray on evenly OKS 341 spray. Allow excess to drip off and wait for lubricant to penetrate before resuming operation.

The combination of a steam protector and a collecting tray is a valuable addition to any eye-level dishwasher. The steam protection strip shields the unit carcase against the steam escaping from the dishwasher when the appliance door is opened. The collecting tray fits flush with the carcase sides so that any dirt or condensation water underneath the dishwasher can be collected. Fitting is carried out without any additional tools using double-sided sticky tape.

Even when securing the load, the lashing material must be protected from the “sharp edge“. Highvalue loads may not be damaged by lashing chains. The secutex SKKE simple edgeprotector is simply placed onto the chain via the slit on the reverse side, making it impossible to lose. The edgeprotector is light and flexible. Due to the low deadweight and flexible textile reinforcement, the edgeprotector can be attached easily and quickly to the load. Important note The secutex SKKE simple edgeprotector is not intended for prolonged use.

By means of a hinge, the edge protector SKD can be optimally suited to any load geometry. The edge protector can be quickly secured to the edge of the wire cable by means of mounting slits. The wire cable slides through the secutex clip which remains on the lashing belt despite collisions.

Magnetic document windows for visual boards and metal surfaces - protects documents from dust and dirt Provide information in a clearly arranged, secured format with magnetic FATH's document windows For variable and structured information provision through secure hold on metallic surfaces e.g. of visual boards, whiteboards, documents are easily exchangeable Useable in portrait and landscape format, easy to reposition thanks to 4 magnetic sides Model: DIN A3 - 11.7" x 16.5" & DIN A4 - 8.3" x 11.7" portrait / landscape format Color coding for different key figures or topic blocks, frame color permanently enclosed between outer foil and surrounding magnetic frame Color: Yellow, red, blue, gray Material: Plastic PC

Stable, tread-resistant PVC conduit. Bottom section has 3 chambers. 2 well-spaced holes for mounting the conduit. Extendable. In poly bag with tab for hanging. Colour: Grey Measurements: 100 x 7,5 x 1,7 cm

Stable, tread-resistant PVC conduit. Bottom section has 3 chambers. 2 well-spaced holes for mounting the conduit. Extendable. In poly bag with tab for hanging. Colour: Grey Measurements: 100 x 5 x 1,2 cm

3-zones corrosion protection for safe wintering and seasonal shutdown of all vehicles, machinery and equipment powered by gasoline. - Extreme protection against corrosion - Cleaning of the fuel system - Stabilization of the fuel THE EFFECT: A selection of highly active substances with an excellent corrosion and aging protection, and detergent of a new generation for a clean fuel- and injection system. MPULSER 3-zones corrosion protection was tested in a corrosion test of practical relevance in terms of its stabilizing, anti-corrosive properties by the independent institute Tec4Fuels GmbH. The results were faced with 4 comparable market products. THE ADVANTAGES AT A GLANCE: - Extreme protection against corrosion in the whole fuel system (in watergasoline- and gas- /air zone). Even with an existing water phase. - Cleaning of the fuel- and injector system – in consequence power recovery by the dissolution of formed deposits / combustion residues

• cutting technology for the most discerning • non-slip foot for safe hold on the work-top • practical blade protector

Glasses with modern wrap-around design: Soft PVC-frame Wide elastic tape for highest wearing comfort Can be worn on standard goggles View disc is exchangeable Technical specification: View disc made of scratchproof polycarbonate Anti-fog coating Partly indirectly ventilated 160 degree field of view Weight: 126g Approval: EN166 1 B 349

Safety and wearing comfort are the most important criteria for Protector Style 300, it provides best possible conditions for a easy, secure and modern helmet. Due to the proved Protector-technology in development of helmet interior in combination with high-density polyethylene for helmet shell leads to a very comfortable helmet. Features of Protector Style 300: Weight: 310g 30mm slot in order to combine ear- and face protection Rain gutter High wearing comfort by 4-point interior design Material: HPDE Head sizes: 50-66 cm Approvals: EN 397 VDE Accessories for Protector Style 300: Sweatbands (terry or leather) Chintrap with bungee or cotton Folding face protection Hearing protection

We offer duvets and mattress protectors in light and year-round versions, in mono- or duo-quality, including detachable two-fold duvets adaptable to different seasons. We can vary sizes, weight, heat coefficient and quilting design according to individual wishes.