Protection plugs - Import export

Because the units carry the label made in Germany you can be sure that you are buying a top-quality, highly efficient and extremely reliable heating unit which will carry on heating in the most hostile of environments and harshest of conditions. Theres also an electronically-controlled multistage switch to regulate air flow and air temperature so that you can carry out blasting, coating and painting work in fact almost any surface work at all - at a constant temperature both indoors and out. Here the low-down on the TEH 200: Heating performance: 40 kW Air flow rate: 3,000 m³/h Input voltage: 400 V Power consumption max.: 61 A Fuse protection / plug: 63 A / CEE 63 A, 5-pin Mobility: wheelable/ fork lift / crane Sound level (distance 3 m): 75 dB (A) Air pressure: 600 Pa Temperature increase ΔT: 60 °C Length: 1,625 mm Width: 800 mm Height: 1,270 mm Weight: 230 kg

Wire-actuated encoder with redundant acquisition of linear measuring distances with a maximum measurement length of 4000 mm. Robust design. Measuring lengths up to 4000 mm. Analogue signal output in redundant design (2x 4…20 mA or potentiometer). Variable mounting options. Lockable vent and water drain holes. Very robust measuring rope (stainless steel). IP65 protection category. M12 plug connection.

Rain protection set 12255 consisting of an extension made of PVC and a black protective cap made of soft PVC for the floor sockets 7702A and 7704A. The rain protection set offers ideal protection against rain with plugged-in connections.

Robust design and redundant sensor system with 6000 mm measuring length Profile SG62: Robust design Measuring lengths up to 6000 mm Analogue signal output in redundant design (2x 4…20 mA or potentiometer) Very robust measuring rope (stainless steel) IP65 protection category M12 plug connection

Robust design and redundant sensor system with 4000 mm measuring length Profile SG42: Robust design Measuring lengths up to 4000 mm Analogue signal output in redundant design (2x 4…20 mA or potentiometer) Variable mounting options Lockable vent and water drain holes Very robust measuring rope (stainless steel) IP65 protection category M12 plug connection

Robust design and redundant sensor system with 3000 mm measuring length Profile SG32: Robust design Measuring lengths up to 3000 mm Analogue signal output in redundant design (2x 4…20 mA or potentiometer) Variable mounting options Lockable vent and water drain holes Very robust measuring rope (stainless steel) IP65 protection category M12 plug connection

Very robust wire-actuated encoder in compact design for numerous areas of application including crane construction, stage construction, warehousing technology, etc., up to a measuring length of 3000 mm, with signal output in redundant design. Easy, universally changeable installation. Robust design. Measuring lengths up to 3000 mm. Analogue signal output in redundant design (2x 4…20 mA or potentiometer). Variable mounting options. Lockable vent and water drain holes. Very robust measuring rope (stainless steel). IP65 protection category. M12 plug connection.

Very robust wire-actuated encoder in compact design for numerous areas of application including crane construction, stage construction, warehousing technology, etc., up to a measuring length of 6000 mm, with signal output in redundant design. Robust design. Measuring lengths up to 6000 mm. Analogue signal output in redundant design (2x 4…20 mA or potentiometer). Very robust measuring rope (stainless steel). IP65 protection category. M12 plug connection.

Rain protection set 12256 consisting of an extension made of PVC and a black protective cap made of soft PVC for the floor sockets 7501A, 7601A, 7602A, 7604A and 7701AW. The rain protection set offers ideal protection against rain with plugged-in connections. Use: Proper installation and proper use is required. The seals must be cleaned of dirt regularly and the products must be checked to ensure they are in perfect condition.

Features • Screws can be screwed in very easily due to the special geometry • Wall plug cap protects the surface to prevent slipping deeper into the drill hole • Ties or expands automatically depending on the building material • Detachable wall plug cap for prepositioned and push-through installation Description & Area of Application • All-purpose wall plug for almost all building materials • 4-way split wall plug body for uniform force distribution • Anti-rotation locks on wall plug neck prevent rotation in the building material • Deco + Screw: Screw with PZ driver

Features • Wall plug cap protects the surface and prevents slipping deeper into the drill hole • Holds in almost all building materials • Ties or expands depending on the building material • Anti-rotation locks prevent rotation in the drill hole • Suitable for pre-positioned installation Description & Area of Application • All-purpose wall plug for almost all building materials • 3-way split wall plug body with wall plug cap • Anti-rotation locks on wall plug neck and wall plug body prevent rotation in the building material • Trika + screw: Countersunk screw with PZ driver

Compact and powerful single phase two-value capacitor motor. Light and convenient Quiet and durable With motor protection switch, connection cable and plug Quick motor assembly/disassembly by Lutz hand wheel Type of drive: Electric Explosion Protection: not explosion-proof

Different stirring elements and agitator speeds possible, adapted to your application, product density, viscosity and solid content Lockable IBC fastening crossbeam for IBC containers 400 to 2,500 litre capacity, with forklift truck adapter Addition of liquids under stirring possible, by connection nozzle at the IBC mounting crossbar Material: stainless steel 304 / 316Ti (product contacted parts) Geared motors in various power ratings optional with speed adjustment via attached frequency converter On/Off switch with motor protection and CEE plug with low voltage release FIELD OF APPLICATIONS

For disconnection of electrical power wrenches in connection with Value Master Base or GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax16 A protection IP64 Safety plug

For disconnection of electrical power wrenches in connection with GMV2 100 - 240 V / 50 - 60 Hz switching capacity approax 16 A protection IP40 Safety plug

Suitable for tough uses even under extreme conditions outdoors, IP 54. Rubber-"cold light"-site lighting. Extremely stable frame. Lights swivel and can be fixed. Robust special rubber housing. Light with hinged handle separate detachable. Electronic ballast. Water-jet protected socket outlets with self-closing protective caps. With special rubber cable and water-jet protected earthed plug. 2 x 36 W bulb included. This luminaire is compatible with bulbs of the energy classes: A - B. The luminaire is sold with a bulb of the energy class: A. Cable length: 5 m Cable: H07RN-F 3G1,5 Power: 2 x 36 W Luminous flux: 2 x 2850 lm Lamp efficacy: 78 lm/W Colour temperature: 4000 K Fittings: 2G10 Socket: 2 x 230 V Ballast efficiency: A2 Energy efficiency class: A Plug-in system: DE

Thanks to its maintenance-free high-power LED technology, the SL spotlight with flexible tube impresses for its extremely long service life. The robust aluminium housing will withstand even the tough environment of working machinery. — LED technology — Colour temperature neutral white 5000 K — Colour rendering index > 70 — 10° or 30° angle of illumination — Housing made of die-cast aluminium painted black — 3 mm thick safety glass — Flexible tube — Maximum allowed ambient temperature Ta max 40° C — LED service life (L70) > 50,000 h — Switch in the light head for On/Off — Degree of protection IP67, protection class II (with plug-in power supply) or III (without plug-in power supply) — Supplied with approx. 3 m connecting cable and plug-in power supply with plug type CEE 7/16 (Euro plug), BS 1363 and NEMA 1-15P or free stranded wire ends — Various fasteners as accessories

— Inverter welding machine, DC — Very light-weight, only 4,7 kg – housing made of aluminium and impact-resistant plastic — Portable, shoulder strap — MMA and TIG lift arc welding — Cellulose electrodes: 100% safe for vertical-down welding — Welding of stick electrodes up to 4 mm — Pulsed MMA welding: — Especially suitable for root welding — Outstanding gap bridging with no sagging of the root side — Fine-flaked weld surface with a TIG look for final passes — Less finishing work thanks to less spatter — Ideal for difficult electrodes — Less distortion thanks to controlled heat input — Pulsed TIG welding with up to 2 kHz — Connection capability for remote control — IP23 spray water protected — Arcforce, hot start, antistick — Energy efficient due to standby mode — 3.5 m mains lead with 16 A earthed plug — Overvoltage protection: No damage to machine caused if inadvertently connected to 400-V mains voltage

Battery diagnostic system Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Mini-USB port for firmware update 37-pin signal interface for cell contact plug Sealed housing, protected against internal pollution Cell voltage monitoring Status indication via display and high power LEDs Menu navigation: English, French, German, Italian, Spanish Wide range of accessories e.g. mains and charging cable, wall mount adapter etc. Option: Customized charging parameters Option: Regeneration charging for deep discharged batteries Electrical safety – certifications: EN60335, EN60950, UL60950-1, UL1236, CSA C22.2 No.60950-1-07, GS, RU Utilized and approved by first-class automotive manufacturer

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Body safety shower with valve, wall mounted, exposed pipework - shower arm ¾“ made of brass, chemical resistant powder coated, projection 625 mm - wall flange ¾” made of brass, chemical resistant powder coated, water inlet ¾” female - ball valve ¾“ made of stainless steel, with pull rod, DIN-DVGW tested and certificated - pull rod made of steel, chemical resistant powder coated, length 700 mm - high-performance shower head made of chemical resistant plastics, with improved spray pattern, corrosion resistant, largely scale and maintenance-free, very robust, self-draining - integrated automatic flow regulation 50 l/min. for a spray pattern acc. to the norms at a specified operating range of 1.5 to 3 bar dynamic water pressure - sign for body safety shower according to DIN 4844-2-D and BGV A8, self-adhesive 150 x 150 mm - installation height 2335 mm (+/- 100 mm) - according to DIN EN 15154-1:2006 - according to DIN 12899-3:2009 and ANSI Z358.1-2004 - DIN-DVGW tested and certificated

Thils filter protect your system against plugging, contamination and damages. Automatically, exactly, contineously, without unplanned stagnation. This system is working as reliable as a swiss watch! .. but much more solid, because art of engineering and Bernoulli-princip. Your working cost level is comparable low, because of compact design, low pump pressure as well as minimized leakage risk. The F480 is easy to service. Our F480 filter is the first filter with Bernoulli-princip for ballast water processing. - Volume flow: up to 45.000 m³/h - Protection against blocking and fouling - Filterfineness to 40 µm - Usage from 0,7 bar working pressure - extrem low loss of pressure - compact design! - reduced piping material