Pressure hoses - Import export

Feature: — excellent abrasion resistance and durability — resistant against slurry and many other chemicals — excellent tensile strength — minimum maintenance — extremely resistant to aging and ozone and UV — Cold-resistant up to – 40 ° C — Heat-resistant up to + 100 ° C — minimum friction loss because of very smooth inner lining — minimum elongation Construction: — inside: very smooth for minimum friction loss — jacket of 100 % high tenacity synthetic polyester yarn, circular woven in special construction for maximum tensile — completely embedded in high-quality thermoplastic polyurethane (TPU), is forced through the jacket in the extrusion process (standard colour: black; others on request), provides optimum protection of the jacket — outside: smooth, excellent abrasion resistance

Feature: — high abrasion resistance and durability by longitudinal ribs → suitable for extreme conditions — resistant against slurry and many other chemicals — excellent tensile strength — minimum maintenance — extremely resistant to aging and ozone and UV — temperature range from – 40 ° C up to + 80 ° C, for short time up to +100°C — minimum friction loss because of very smooth inner lining — minimum elongation Construction: — inside: very smooth for minimum friction loss — jacket of 100 % high tenacity synthetic polyester yarn (reinforced construction), circular woven, embedded in a rubber compound - provides optimum protection of the jacket — high-quality Nitrile/PVC compound is forced through the jacket in the extrusion process (standard colour: black and yellow; other on request), reinforced version — outside: longitudinal ribs for excellent abrasion resistance

Feature: — high abrasion resistance and durability by longitudinal ribs → by trouble with a damage of the cover an easily repair is possible — minimum maintenance — extremely resistant to aging and ozone and UV — temperature range from – 40 ° C up to + 80 ° C, for short time up to +100°C — minimum friction loss because of very smooth inner lining — suitable for sea water, hot water, oil, fuel, many chemicals Construction: — inside: very smooth for minimum friction loss — jacket of 100 % high tenacity synthetic polyester yarn, circular woven, embedded in a rubber compound provides optimum protection of the jacket — high-quality Nitrile/PVC compound is forced through the jacket in the extrusion process (standard colour: black; other on request) — outside: longitudinal ribs for excellent abrasion resistance

Feature: — high abrasion resistance and durability by longitudinal ribs → by trouble with a damage of the cover an easily repair is possible — minimum maintenance — extremely resistant to aging and ozone and UV — temperature range from – 40 ° C up to + 80 ° C, for short time up to +100°C — minimum friction loss because of very smooth inner lining — suitable for sea water, hot water, oil, fuel, many chemicals Construction: — inside: very smooth for minimum friction loss — jacket of 100 % high tenacity synthetic polyester yarn, circular woven, embedded in a rubber compound provides optimum protection of the jacket — high-quality Nitrile/PVC compound is forced through the jacket in the extrusion process (standard colour: black; other on request) — outside: longitudinal ribs for excellent abrasion resistance

For use in floating or fixed pipelines. To handle fine and coarse-grained materials. Applications: Wet dredging, sand and gravel excavation, water to land transport pipe. Construction: Highly abrasion-resistant tube Tension and pressure-resistant special fabric inlays UV, ozone and weather-resistant, abrasion-resistant cover Interior and exterior smooth Sections cut to length with cuffed ends and/or widened hose endings or built in flanges. Other versions and dimensions on request.

Industrial hose for high pressure loads in the liquid and gaseous media fields. Elastomer used based on application or agreement with customer. Fittings vulcanized on at both ends in DIN, ANSI (ASA) or special bore. Temperature resistant from –40°C to +160°C depending on application. Construction: Special quality tube Tension and pressure-resistant special fabric inlays UV, ozone and weather-resistant cover Interior and exterior smooth, fabric patterned Cut to length with flanges or fittings vulcanized on at both ends. Other versions and dimensions on request.

Guide rollers are valuable to help reduce wear of and damage to high pressure hoses. Make sure to use this kind of equipment! Guide roller - underground is available in three sizes: small, medium and large

Guide rollers are valuable to help reduce wear of and damage to high pressure hoses. Make sure to use this kind of equipment! Guide roller - upper edge, made of galvanized steel, roller diameter 225 mm.

For marine applications we produce hoses and technical hose products in dimensions from 15 to 1600 mm, in variable lengths and for suction and pressure purposes from 1.0 bar vacuum to 150 bar WP. Temperature resistant from –40°C to +1200°C. We are in possession of testing certificates of various certification and classification companies for these products. APPLICATIONS Exhaust hoses Aramide hoses Fuelling hoses Bunker hoses Steam hoses Deck washing hoses Fender Fish suction hoses Flat hoses Flame-resistant hoses Flange hoses High-pressure hoses Cable protection hoses Expansion joints Fuel hoses Coolant hoses Product transport hoses Suction and pressure hoses INDUSTRIAL HOSE As connecting piece or coupling in pipelines. SPIRAL HOSE Movable connecting element in pipelines for suction and pressure purposes. CORRUGATED HOSE Highly flexible connecting element in pressure and vacuum applications in all peripheral feed and drain lines. EXPANSION JOINT Flexible compensator with...

Suction and Pressure hose for liquid media, also with solids content. Resistant to faeces and light alkaline solutions. Suitable for use on suction vehicles and fixed-location pumping stations. Temperature resistant from -40°C to +100°C. Construction: Faeces-resistant tube Optional: Oil and petrol-resistant tube Tension and pressure-resistant fabric inlays Concealed steel spiral Abrasion-resistant cover Interior and exterior smooth, fabric patterned Supplied by the roll or cut to length with cuffed ends and/or widened hose endings. Other versions and dimensions on request.

We produce hoses and technical hose products for many well-known engine and vehicle manufacturers in dimensions from 10 to 250 mm at any length and various working pressures. COUPLING Pressure-resistant hose elements as a straight connector or de-coupling element in pipelines for pressures up to 20 bar. SPIRAL HOSE Suction and pressure-resistant versions from -0.9 bar to +20 bar, with or without cuffed ends. Can also be laid in narrow radiuses. CHARGE AIR HOSE As an industrial hose, hose elbow or corrugated spiral hose for suction and pressure lines. As bellows with external metal rings in the pressure area. HOSE ELBOWS Stable shape connecting elements, either for suction and/or pressure in any geometry. Other versions and dimensions on request.

brass or stainless steel Vitonseal (FEP optional) builtin ball guiding tracks similar to ball bearings swiveling, rotating movements with low speed for simple applications for example hose reels PRESSURE MAXIMUM PRESSURE MAXIMUM 16 bar Stainless steel Brass PRESSURE MAXIMUM 16 bar Stainless steel Brass

Flexible pressure hose for petrol and benzole mixtures 50 : 50, leaded and unleaded fuels with aromatic content up to 50% Diesel fuels, heating oils, mineral oil-based hydraulic oils. Barrel-polishable hose with very narrow bending radiuses and easy handling. Temperature resistant from –35°C to +90°C. Conforms to DIN EN 12115. Construction: Oil and petrol-resistant, conductive NBR tube Tension and pressure-resistant fabric inlays Embedded copper wire Weather-resistant, abrasion-resistant, conductive CR cover Interior and exterior smooth, fabric patterned *) Version as tank cleaning hose. Resistant to all customary cleaning agents. Supplied by the roll or cut to length. Other versions and dimensions on request.

Short description: For your own safety GrüloKan 250 Protect offers you all the benefits of our classical rubber sewer cleaning hose GrüloKan 250. Furthermore the yellow protection layer underneath the cover makes it easier for you to handle a high pressure hose in acccordance with the requirements of working safety. As soon as the cover gets thinner - in consequence of the rough operating conditions - the yellow protection layer becomes visible and warns you that its time to change the hose. So you and your staff members are always on the safe side. All hoses are assembled with BSP female/male and ferrules. Delivery takes place with test certificate on each assembled hose.

In order to prove the quality of the fluid-carrying parts, all hoses, pipes, pressure vessels and other components are put under pressure until they burst. The process is precisely measured and documented in order to optimally design the components for specific applications.

stell (zinc plated) NBRseal Ball bearing version swiveling, rotating movements with low speed for simple applications for example hose reels PRESSURE MAXIMUM 80 bar DN 32 (1 1/4") DN 40 (1 1/2") 100 bar DN 25 (1") 150 bar DN 20 (3/4") 200 bar DN 8 (1/4") DN 10 (3/8") DN 15 (1/2") SIZEDN 8 (1/4") DN 10 (3/8") DN 15 (1/2") DN 20 (3/4") DN 25 (1") DN 32 (1 1/4") DN 40 (1 1/2")

For the general mechanical engineering industry we produce hoses and technical hose products in dimensions from 15 to 1600 mm, in variable lengths and for suction or pressure applications. To handle solid, liquid and gaseous media at temperatures from -40°C to +260°C. Below you will see a selection of possible connections, also customised with a wide range of couplings: INDUSTRIAL HOSE As a connecting hose or coupling in pipelines. SPIRAL HOSE Flexible connection for pipelines for suction and pressure applications. CORRUGATED SPIRAL HOSE Highly flexible connecting element in pressure and vacuum applications, in all peripheral feed and drain lines. EXPANSION JOINT Flexible compensator with high vertical and axial tension and pressure-resistance in all areas. HOSE ELBOW Stable-shape connecting element, either for suction and/ or pressure in any geometry. CONNECTIONS We offer customary fittings for our hoses, for bonding-in or vulcanised on. Please see “SIMON – Hose...

For use with saturated steam and hot water up to 90°C. Suitable for cleaning purposes. Steam hose 164 (+164°C/ 6 bar WP) or steam hose 210 (+210°C/ 18 bar WP) with 10 times bursting pressure safety. Also suitable for cleaning operations. Conforms to DIN EN ISO 6134. Construction: Black, electrically conductive EPDM tube Tension and pressure-resistant reinforcement inlays STEAM HOSE 164: Wrapped fabric inlays STEAM HOSE 210: Wrapped steel inlays Weather-resistant, electrically conductive, abrasion-resistant EPDM cover Interior and exterior smooth, fabric patterned *) Versions conforming to DIN EN ISO 6134. Versions with embedded steel wire on request. Other versions and dimensions on request.

Working range Sets speed rivets up to Ø 4.8 mm aluminium and Ø 4.0 mm steel. Suitable for speed rivets with a mandrel length between 483 mm and 510 mm. Further lengths available on request. Technical data Traction power: 3,500 N Stroke: 26 mm Operating pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4“) Weight: 1.8 kg Equipment Spreader nosepiece in working position Tag on device head Rubber foot Advantages • Quick setting process, fast rates • Safe working through disposable mandrel and optional automatic switchoff • Ergonomic handling for fatigue-free work • Light and compact design • Modular construction based on the TAURUS® design • Softgrip • Tool-free conversion

Working range Sets blind rivets up to 6.4 mm Ø all materials and up to 8 mm Ø alu (max. mandrel dia. 4.5 mm) Technical data Weight: 2.0 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 4.8 ltr. per rivet Traction power: 23.000 N at 6 bar Stroke: 19 mm Equipment Nosepieces:17/36, 17/40 and 17/45, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, Operating instructions with spare parts list

Working range 6.4 lock bolts MagnaGrip®* and C6L®* Technical data Weight: 2.6 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4“) Air consumption: approx. 4.8 NL per rivet Setting force: 23,000 N at 6 bar Stroke: 19 mm Accessoires Angle head with nosepiece in working position Tag on device head 1 hydraulic oil bottle 100 ml 1 oil refill can Operating instructions with spare parts list Advantages • Hydro-pneumatic lock bolt setting device • Accessibility in tight working spaces • Light and compact design • Modular structure • Ergonomic handling

Working range Blind rivets above 6,4 mm Ø all materials and lockbolts up to10 mm Ø with corresponding pulling heads Technical data Weight: 3.4 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 6.9 ltr. per rivet Traction power: 50.000 N at 7 bar Stroke: 15 mm Equipment 1 hydraulic oil bottle 100 ml 1 oil refi ll can Operating instructions with spare parts list

Working range Sets blind rivets up to 5 mm Ø all materials and up to 6 mm Ø alu/steel (max. mandrel dia. 3.2 mm) Technical data Weight: 1.6 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2,3 ltr. per rivet Traction power: 11.000 N at 6 bar Stroke: 18 mm Equipment Nosepieces:17/27, 17/29, 17/32 and 17/36, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml,1 oil refi ll can, operating instructions with spare parts list

Working range Sets blind rivets from 2.4 up to 3.2 mm Ø all materials and up to 4 mm Ø alu/steel (max. mandrel dia. 2.5 mm) Technical data Weight: 1.3 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 1,0 ltr. per rivet Traction power: 5500 N at 6 bar Stroke: 15 mm Equipment Nosepieces:17/18, 17/24 and 17/27, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, operating instructions with spare parts list

Working range Blind rivet nuts from M3 up to M10 all materials as well as M12 in aluminium and steel Technical data Weight: 2.4 kg Adjustable stroke,max: 10mm Adjustable traction force, max: 18,5 kN at 5 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2 to 4 ltr. per rivet nut (depending on nut size) Scope of delivery 2 double open ended wrenches SW 24/27 1 hexagon screw driver SW 4 1 oil refi ll can with hydraulic oil 100 ml 1 oil refi ll can Operating instructions with spare parts list

Working range Blind rivets from M3 up to M6 of all materials, except M6 stainless steel Technical data Weight: 1.96 kg Maximum stroke: approx. 7,5 mm Adjustable traction force: up to approx. 10,5 kN at 5 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 1 - 2 ltr. per setting process (depending on nutsize) Scope of delivery 2 double open ended wrenches SW 24/27 1 hexagon screw driver SW 4 1 oil refi ll bottle with hydraulic oil 100 ml 1 oil refi ll can operating instructions with spare parts list Rubber foot Quick setting guide

Working range Sets blind rivets up to 6.4 mm Ø all materials (max. mandrel dia. 4.5 mm) Technical data Weight: 1.9 kg Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 4.8 ltr. per rivet Traction power: 18.000 N at 6 bar Stroke: 25 mm Equipment Nosepieces:17/36, 17/40 and 17/45, maintenance wrench SW12/14, SW14/17, 1 hydraulic oil bottle 100 ml, 1 oil refi ll can, Operating instructions with spare parts list

The FireFox® 2 can be optionally controlled via the stroke or setting force setting. Advantages • Fast and precise setting force adjustment with colour-coded setting ring (1) • New stroke scale quick and easy to set even under poor light conditions • Maximum stroke clearly identified by blue ring on stroke scale (2) • Throttle plate: Automatic throttle for even faster and protective setting as from M3 blind rivet nuts • PTFE (Teflon®) seal. PTFE seal and optimised pilot holes improve the service life of the slide valve Working range Sets blind rivet nuts from M3 to M10 in all materials as well as M12 in aluminium and steel. Technical data Weight: 2.4 kg Adjustable stroke,max: 10mm Adjustable traction force, max: 22 kN at 6 bar Operating air pressure: 5-7 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: approx. 2 to 4 ltr. perrivet nut

Working range Blind rivets up to 4 mm Ø all materials. Not suitable for stainless steel CAP® blind rivets. Technical data Weight: 1.2 kg Operating air pressure: 6 bar Air hose connection: 6 mm Ø (1/4’’) Air consumption: 0.8-1.2 ltr. per rivet (0,2 ltr. compr. air) Traction power: 5.200 N at 5 bar Stroke: 15 mm Nosepieces/accessories Nosepieces: 16/18, 16/24, 16/27 and 16/29 1 set of jaws, 1 spent mandrel bottle, 1 wrench each of MSU and MSZ, Maintenance instructions with spare parts list Features • Hydraulic head in aluminium with wear-proof cylinder surface • Pneumatic cylinder made of die cast aluminium • The piston made of hardened and hard chromium plated steel make the device easy to handle and wear-proof • Compact seals are wear-proof for a long service life • Fast venting valve for fast return and high working sequence • Low-noise pneumatic switching • Simple, low-interruption valve design • Hydraulic head can be adjusted by 360°