Results for
SHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These are the parts used in machine support.Made by aluminium, machining and doing the sandblasting and natural anodize surface treatment.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
These parts were made by stainless steel,which is produce from custom-made by drawing picture,we are strictly control the tolerance range to provoide perfects products.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
The BH25 is a high resolution exposed linear encoder with interferometric measurement signal generation. The BH25 scale has a graduation period of 1µm. The interferometric laser scale principle generates a sinusoidal measurement signal with a signal period of 250nm in the read head. The BH25 is characterized by its small size and high signal quality. It is suitable for resolutions of up to 3.8pm. Due to the reflective scanning and the small design it is perfectly suited for high accuracy X/Y stages with linear motor drive as well as for measurement applications
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
The BS78 is a high accuracy exposed linera encoder with an interferometric signal generation in transmitted light design. The scale has a graduation period of 0.55µm. The LASERSCALE operating principle generates a sinusoidal measuring signal with a signal period of 138nm. This has an extremely high signal quality with a very low noise component. This allows resolutions of up to 2.1 pm to be generated. Due to the extremely low interpolation error, the BS78 is perfectly suited for ultra precision machining, measurement and calibration applications.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
The BL57 is a high-resolution, exposed linear encoder with interferometric operating principle in transmitted light design. The BL57 has a graduation period of 1.6µm and generates a sinusoidal signal period of 400nm due to the laserscale operating principle. This allows resolutions of up to 6.1pm. to be achieved. Due to the high response speed of up to 3m/s, it is perfectly suited for high-precision and fast X/Y stages.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
The BL50H is a high resolution exposed linear encoder in reflective design. The BL50H has a grating period of 1.6µm and generates a signal period of 400nm with the Laserscale operating principle. The extremely small dimensions, made possible by the reflective design and large mounting tolerances, allow easy integration into X/Y stages and a wide variety of measurement applications. It provides a very high signal quality with low noise level and is suitable for resolutions up to 6pm at travel speeds up to 3m/s.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring fixtures, assembly and production lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High precision magnetic absolute linear encoder for CNC machine tools in robust design Measuring lengths:140mm - 3.640mm Accuracy: 3+3ML/1.000 µm(p-p) or 5+5ML/1.000µm(p-p) Max. Resolution: 10nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Highly accurate magnetic absolute linear encoder with slim design for machine tools with Siemens, Fanuc, and Mitsubishi CNCs Easy integration in cramped installation conditions due to the slim design Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron. Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DRIVE-CLIQ version is Functional Safety certified
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High precision incremental length probe with magnetic operating principle Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High accuarcy incremental length probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust Due to the Ø 20mm clamping shaft extremely robust against oscillations and vibrations Perfectly suited for automated data acquisition in measuring devices, assembly and production lines
Request for a quoteEDDYLAB GMBH
Germany
eddyMOTION is a Windows-based analysis and configuration tool for eddy current probes. In combination with the TX electronics from eddylab GmbH, the software tool combines several performance features: The functional areas oscilloscope, FFT analysis, data logger and waterfall diagram, enables the visualization and documentation of mechanical movements. eddyMOTION also suites the on-site linearization of eddy current sensors in a traceable manner, without external assistance. In addition to the TX electronics and an eddylab eddy current sensor, a reference probe is required for this purpose: Together with the eddy current sensor, this probe measures the distance to the same material, with the reference probe serving to check the sensor.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Read head for connection to position indicators LG20 and LH70 series Output signal: TTL A/B quadrature signal, compliant with EIA-422 Maximum resolution: 10μm Maximum response speed: 300m/min (varies depending on read head and setting) Extremely insensitive to even the harshest environmental conditions (IP65) Resistant to oil, dust, vibration and shock
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental lengths probe with magnetic operating principle. Extremely insensitive to contamination such as oil mist, moisture and dust. Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing plants.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Exposed incremental linear encoder with magnetic grating. Compact tape scale with high accuracy and integrated reference mark. Non-contact magnetic detection principle Magnetic principle with exceptional resistance to oil, dust, vibration and shock. Effective length from 50 mm to 100,000 mm Output signal with PL101 read head series: 1Vpp /TTL/Serial Yaskawa/Serial Panasonic/Serial Mitsubishi Three versions with different reference point specifications are available
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
MAGNESCALE EUROPE GMBH
Germany
Exposed linear encoder (magnetic tape). Extremely insensitive and easy installation with large tolerances. Magnetic grating with 2mm pitch Extremely insensitive to oil, dirt, vibration and shock. Accuracy: +/-(15 + 5L/1,000)μm (L=measuring length in mm). Resolution SL331 with PL60: 2μm High response speed: 300 m/min Compatible read head: PL60-3 (not included) Measuring lengths of up to 8m Easy installation Position control of long measuring lengths up to 8m
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
PL81 / PL82 read heads for SL110 / SL130 tape scales with interpolation electronics and TTL output signal PL81: TTL through open collector output PL82: A/B phase via TTL line driver interface (RS422) Max. Response speed: 5m/s Max. Resolution: 10µm (phase to phase) Easy installation and large mounting tolerances For universal measured value acquisition e.g. in automation For connection to SPS counter cards Protection class: IP67 available Resistant to oil, dirt, vibration and shock
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Interferometric angle measuring system, non-contact, open design for resolutions of up to 1.5nrad. The BH20 angle measuring system in open non-contact design is based on interferometric signal scanning. It offers extremely high resolutions and repeatability. The interferometric scanning produces an extremely high signal quality with extremely low noise.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteLT ULTRA-PRECISION TECHNOLOGY GMBH
Germany
We would be happy to check the dimensional accuracy of your components in-house. LT Ultra-Precision Technology has a large number of high-precision measuring devices in precisely air-conditioned measuring laboratories for testing its own products, on which we also carry out contract measurements.The following measurement technology is available:High-precision coordinate measuring technology.Interferometric shape measurement technology for plane surfaces, spheres and aspheres.Roughness measurement technology via white light interferometer (WLI) or atomic force microscope (AFM).Reflections- and Transmissionsmessung.Ellipsometrie.Polarimetrie
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High-precision angle measuring system with +/-0.1s accuracy for measuring and calibration applications. The signal sampling is done by an interferometric operating principle (laserscale) The graduation period is 1µm, the generated signal period of the output signal is 250nm. Scale errors are self-compensated by using six reading heads in a special arrangement. The measured values can be output in csv format via the USB interface. The software for measured value acquisition and storage is included in the scope of delivery.
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Output signal: A/B quadrature signal, compliant with EIA-422 with MJ100 / MJ110 (sold separately) Maximum resolution: 5µm Maximum response speed: 300m/min (varies depending on read head and setting) Extremely insensitive to even the harshest environments (IP65) Resistant to oil, dust, vibration and shock
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
High resolution magnetic absolute linear encoder system for CNC machine tools with robust design. The read head is guided contactless without ball bearing Measuring lengths: 70mm - 3.770mm Accuracy: 3+3ML/1.000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Extremely robust against vibration and shock Insensitive to contamination such as oil, water, moisture and dust due to the magnetic operating principle Same thermal expansion behavior as steel or cast iron machine bed Compatible with serial protocols from Fanuc, Mitsubishi and Siemens Siemens DriveCliQ version is Functional Safety certified
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Absolute exposed linear encoder for CNC machine tools with Siemens (DRIVE-CLIQ) , Fanuc and Mitsubishi CNC. Due to the magnetic operating principle of the SQ47, the measuring system is extremely insensitive to contamination, e.g. oil, water and dust, while at the same time providing maximum accuracy and resolution. Contactless read head design without ball bearing guide Measuring lengths: 90mm - 3.740mm Accuracy: 3+3ML/1,000 µm(p-p) Max. Resolution: 5nm Max. Response speed: 200m/min Protection class: IP67 without supplied air Interface: Siemens DriveCliQ, Fanuc, Mitsubshi Thermal expansion like steel Easy installation
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental length probe with magnetic detection principle for high reliability. Very high accuracy and repeatability Extremely insensitive to contamination such as oil mist, moisture and dust Ball spline bearing of the spindle for long life time Perfectly suited for automated measured value acquisition in measuring devices, assembly and manufacturing lines
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Exposed linear encoder ( magnetic tape) for resolutions up to 5µm. Very easy installation by clamping or gluing with large mounting tolerances. Perfectly suited for simple length measurement in a wide range of applications. Measuring lengths: 200mm - 30m Accuracy: +/-(25+5L/1.000)µm; L= measuring length Graduation period: 5mm Recommended for resolutions up to 5µm Compatible with PL20C, PL25-3 and PL81/PL82 read heads (sold separately) SL110: open length measuring system in aluminum profile for clamp-on mounting SL130: open length measuring system as tape for sticking on Simple mounting Extremely robust position measuring system for large measuring ranges
Request for a quoteMAGNESCALE EUROPE GMBH
Germany
Incremental linear encoder for manual machine tools or measuring applications with counter display. Magetic detection principle makes it extremely insensitive against contamination such as oil, water and dust. Wide tolerances for easy installation For connection to LG20 and LH70 series position indicators
Request for a quoteResults for
Precision measuring instruments - Import exportNumber of results
91 ProductsCountries
Company type
Category