Power supply modules - Import export

The power supply modules of the IM82-24 series feed DC consumers and especially our IM, IMS and IMC interface modules with 24 V. The devices are mounted on DIN rail and meet protection class IP20. The output current is - depending on the type - 2.5 A, 5 A, 10 A or 20 A. Thanks to their universal AC/DC input, the power supplies can be used worldwide in numerous networks. Other features include high efficiency, as well as temperature resistance and dynamic overload capability.

Fixed gas detection system for oxygen, toxic and combustible gases This DIN – rail mounted modern control module saves space, money and installation time. One safe controller for all gases: Any combination of a sensor head plus control module is a complete gas detection system. This makes the Statox 501 so safe and reliable. The Statox 501 also gives you the opportunity to alter or expand existing systems with minimum cost and labor. Programs for all gases and measuring ranges are permanently stored in the memory of the controller. The user-friendly software program allows authorized personnel to select different configurations by a simple push of a button. Easy to install and easy to use The controll modules as well as the power supply and the common alarm module clip on to a DIN rail. The remote sensor heads and any alarm or recording devices connect to terminals on the front of the module. Each Statox 501 control module has three relays for alarm 1 and 2 and system failure (115 / 230 V AC / 2 A). An analog output for recorder or process control systems is also included. Measured values are displayed on a 4 digit LED-display. It is easy to program or calibrate the Statox 501! Just follow the menu! If intrinsically safe transmitters are to be installed in division 1 areas, they can be connected via intrinsically safe repeaters. 24 V power supply as well as the signals for the common alarm module are transmitted via bus from one module to the next. All terminals are easily accessible from the front. Field proven sensors for reliable gas detection Compur manufactures electrochemical sensors for the detection of oxygen deficiency and toxic gases. These sensors generate an electrical current proportional to the actual gas concentration. The remote sensor heads are designed as intrinsically safe certified 4 - 20 mA transmitters and have an integrated concentration display. Combustible gases can be detected with a variety of catalytic beads (pellistors) or infrared technology. The sensor heads are certified "Ex d" or "Ex de" and can be connected directly to the control module, even if they are to be used in classified areas. The control module can supply and operate different designs of catalytic sensors. With so many possibilities, the system can easily be tailored to suit your individual application needs. Easy maintenance saves time and money Maintenance of the 4 – 20 mA transmitters is very easy. A one-man calibration or replacement of the sensors can be done without further precautions, even in classified areas. Accessories A range of wall-mount cabinets for a maximum of 5, 8 or 32 controllers as well as a 19”-carrier, ensure an easy professional installation. -20 - +60 °C

Ultra-Low Standby Power 60mW High Efficiency Worldwide applicable, AC/DC wide range input 100–240V Reduced Inrush current Safety acc. to EN61558-2-16, EN60335; EN60950 EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25…+85°C) Mounting in flush device box Ø 60 mm, depth 45 mm

Ultra-Low Standby Power High Efficiency up to 85% Smallest design (Ø 53mm) Worldwide applicable, AC/DC wide range input Reduced Inrush current Connect more devices to one automatic circuit breaker Long Hold-Up time Safety acc. to EN60950, EN60335 EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25°C ... +70°C) Mounting in flush device box (Ø 60mm, depth 42mm) Optional – on request: Customized cable length or mains cable Optional – on request: Output power: 20Watts and more Optional – on request: Combined variant with connector and cable Optional – on request: Customized output voltages Optional – on request: Current regulated version for LED applications

Ultra-Low Standby Power High Efficiency up to 85% Smallest design (Ø 53mm) Worldwide applicable, AC/DC wide range input Reduced Inrush current Connect more devices to one automatic circuit breaker Long Hold-Up time EMC acc. to EN61204-3, EN55011 class B, EN61000-6-2 Protection Class 2 (no protective earth) Wide working temperature range (-25°C ... +70°C) Optional, on request: Customized cable length or mains cable Optional, on request: Output power: 20Watts and more Optional, on request: Combined variant with connector and cable Optional, on request: Customized output voltages Optional, on request: Current regulated version for LED application

Product information "DT50 Medical" Characteristics DT50 Medical: universal input 100 to 240 V AC, constant voltage, current limited, green LED indicator, leakage current ≤ 10 μA, continuously short circuit proof, 2 x MOPP. •5V 5000mA up to 24V, 2200mA •Current: 5000 mA •Means of Protection: Input Output 2xMOPP, Input - Ground 1xMOPP •Output voltage tolerance: +2% / -2% •Frequency: 50 / 60 Hz •AC Input: 2 pole, IEC60320-C8 socket •Humidity: 5% to 95% •Working temperature: 0°C - 40°C •Storage temperature : -40°C - 70°C •MTBF: 200.000h acc. Mil217F (based on calculations at 120Vac/60Hz & 230Vac/50Hz, ambient 25°C and 100% load) (The MTBF are theoretically determined values, which does not guarantee the lifetime of the product or of the electrolytic ) h •Standard: IEC60601-1 •DC output: Universal output plug system •Input tolerance: ±10% •Input voltage: 100-240 V •Protection Class: II •Spec.0 cover sheet FW-Type: FW7405M/05 •color: black