Results for
CIC - KLAUS CZERWONKA
Germany
Fastening elements, bearings and add-on elements for pneumatic cylinders according to ISO 6432 and ISO 15552.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Miniature indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Miniature indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Indicator with pressure connection M5 for visual indication of pressure.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
The new generation of our pneumatic cylinders according to ISO 15552. Light and robust thanks to innovative design and high-quality materials. An aluminum piston with wear protection, reinforced bronze guides and our MF5 multifunction system with improved damping, centering and sealing ensure maximum reliability even under extreme conditions.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Sensors and proximity switches for pneumatic cylinders according to ISO 6432 and ISO 15552.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatically and electrically operated valves with connection pattern according to NAMUR. High quality aluminum construction. Available in 1/4 and 3/2 and 5/2 sizes.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Our new generation of particularly robust pneumatic cylinders with tie rods.
Request for a quoteCIC - KLAUS CZERWONKA
Germany
Pneumatic standard cylinder according to DIN / ISO 6432. Available in diameters between 8 and 25 mm. Standard version in single / double-acting, with magnetic piston and adjustable cushioning. A complete range of accessories for mounting and position sensing is available.
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ 650 2/2-way diaphragm valve has a stainless steel piston actuator and is pneumatically operated. The valve is designed for use in a sterile environment. All metallic actuator components are made of stainless steel. The compression springs of diaphragm sizes 80 and 100 are made of epoxy coated spring steel. Normally closed (NC), Normally open (NO) and Double acting (DA) control functions are available. An integral optical position indicator is standard. —Hermetic separation between medium and operator —Suitable for inert and corrosive liquid and gaseous media —CIP/SIP cleaning and sterilising capabilities —Autoclave capability —Optional flow direction and installation position
Request for a quoteGEMÜ GEBRÜDER MÜLLER APPARATEBAU GMBH & CO. KG
Germany
The GEMÜ R690 2/2-way diaphragm valve has a low maintenance membrane actuator and is pneumatically operated. Normally Closed (NC), Normally Open (NO) and Double Acting (DA) control functions are available. The High-Flow valve body provides compact dimensions at high flow rates. —Same mounting height planes over multiple nominal sizes —Compact plant design due to flow optimised valve bodies —Reduced control air consumption —Varied optional accessories for measurement and control
Request for a quoteBEHRINGER GMBH MASCHINENFABRIK UND EISENGIESSEREI
Germany
Simple operation, robust design and precise cuts make the metal-cutting cold saws of the VMS series a reliable partner in the workshop and factory. They are real all-rounders when it comes to cutting solid materials, tubes and profiles. In addition to the automatic saw feed, the VMS 350 PV also offers pneumatic clamping of the material. The heart of the VMS circular saw unit is the worm gear unit with EISELE shock-absorbing feature, produced in-house. It is heavy duty and provides for a smooth, low-vibration running of the saw, which, of course, has a positive impact on the quality of the cutting surface, the blade life and the service life of the saw. A quick change of the saw blade is easily possible thanks to the large safety hood. The hydro-pneumatic saw feed can be adjusted infinitely.
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling - but not designed for steady motion of the tube
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread- Chambered O-ring - Seals NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, not designed for steady motion of the tube - Not designed for steady motion of the tube
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
EISELE GMBH
Germany
— Material Al natural anodized, brass nickel-plated — Sealing FPM — Plug connectors Series 15 (release ring) — without shut-off — Can be assembled as bulkhead — Temperature range -20 to +120 °C (-4 to 248 °F) — Working pressure range -0.95 to 16 bar (-14 to 232 psi) — for compressed air
Request for a quoteEISELE GMBH
Germany
— Whitworth pipe thread DIN ISO 228 — Chambered O-ring — Seals FPM — Material with media contact: Brass, dezincification resistant — Material without media contact: Brass — Temperature range: -4 to 248 °F (-20 to +120 °C) — Working pressure range: -14 to 218 psi (-0.95 to 15 bar) — Not designed for steady motion of the tube
Request for a quoteEISELE GMBH
Germany
- One interface for compressed air, gases, fluids, vacuum, electrical and electronic signals - Maximum modularity due to freely configurable connections - Integrated coding in the housings prevents incorrect connections - Easy, tool-free mounting and dismounting - Locking lever reduces the force needed for assembly - Machine set-up times are reduced - Fits to Eisele adaptive inserts - Coupling and slotted nut material: Chemical nickel-plated aluminum - Lever materials: anodized aluminum / 1.4301 (304) stainless steel - Other materials: 1.4404 (316L) stainless steel / A2 / POM - Knurled screw with retaining cable
Request for a quoteEISELE GMBH
Germany
- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FKM - Material: AL, seawater-proof - Temperature range: -4 to 248 °F (-20 to +120 °C) - Working pressure range: -14 to 232 psi (-0.95 to 16 bar)
Request for a quoteEISELE GMBH
Germany
- One interface for compressed air, gases, liquids, electrical and electronic signals - Fits to Eisele Adaptive insets - Can be assembled as bulkhead - Material Al nickel-plated or stainless steel - Temperature range -20 to +120 °C - Working pressure range -0,8 to 0 bar or 0 to 24 - Up to max. 14 connections
Request for a quoteKURO KUNSTSTOFFE GMBH
Germany
PVC is a sustainable, durable plastic. The classic material for pneumatic tube systems, today made from lead-free PVC-U, comes with the advantages of low weight and easy handling. Our warehouse stocks the largest range of dimensions, colours and bend radii.
Request for a quoteKURO KUNSTSTOFFE GMBH
Germany
Safe - fast - easy: these are the key properties of the KURO PEHD underground tube programme. This is the only absolutely watertight underground pneumatic tube that doesn‘t require a forwarding tube because the carriers travel directly in the specially dimensioned system.
Request for a quoteKURO KUNSTSTOFFE GMBH
Germany
Safe - fast - easy: these are the key properties of the KURO PEHD underground tube programme. This is the only absolutely watertight underground pneumatic tube that doesn‘t require a forwarding tube because the carriers travel directly in the specially dimensioned system.
Request for a quoteKURO KUNSTSTOFFE GMBH
Germany
Safe - fast - easy: these are the key properties of the KURO PEHD underground tube programme. This is the only absolutely watertight underground pneumatic tube that doesn‘t require a forwarding tube because the carriers travel directly in the specially dimensioned system.
Request for a quoteHS UMFORMTECHNIK GMBH
Germany
The advantages to you: no more deformation of roundness when cutting bends on site easier extension-pipe/tiered pipe bend construction appealing visually pickled surface All of our pipes and pipe bends (both unannealed and annealed) are made of the following material: stainless steel pipe, material no. 1.4301 (AISI 304) longitudinal seam welded pipes hot rolled & cold rolled coils, unannealed, with or without pickling (W1) Make: IltaInox and/or Marcegaglia
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
Pneumatic timers are used for the precise time control of pneumatic signals in pneumatic circuits or systems. The pressure-independent function of time delay starts when pressure is applied to the control port. After the pre-selected time is elapsed, an internal 3/2 way valve is switched. The pneumatic timer is reset to the initial condition if the control port is vented for at least 300 ms. The adjustable time delay depends on the chosen version and amounts between 0.5 and 180 s. Due to its design the control pressure level must not be below working pressure level. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteKENDRION KUHNKE AUTOMATION GMBH
Germany
The simple and compact design of this miniature PE converter with fixed switch-on pressure of 0.8 bar allows its use in various applications such as medical technology, dental treatment units, robotics, analysis systems, process and safety engineering. Easy mounting and high functional reliability are other advantages. By using silver contacts a long lifetime can be ensured even at high switching frequencies. As a result of the fire-risk evaluation according to EN 13463-1, the pneumatic timers are not subject to ATEX regulations. This means they may also be used in explosion hazardous areas as defined in IIG/ IID.
Request for a quoteResults for
Pneumatics - Import exportNumber of results
655 ProductsCountries
Company type
Category