Results for
THERMA THERMOFÜHLER GMBH
Germany
Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection
Request for a quoteJACOB GMBH
Germany
Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range depends on the material of the o-ring VMQ: -55 °C / + 120 °C EPDM: -40 °C / + 120 °C NBR: -40 °C / + 100 °C — Protection grade IP66 / IP68 - 10 bar (6h) / IP69K
Request for a quoteJACOB GMBH
Germany
Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B
Request for a quoteJACOB GMBH
Germany
Screw plug for the secure sealing of unused threaded or clearence holes. Features: — Temperature range -40 °C / + 100 °C — Protection grade IP66 / IP68 - 5 bar — Test Standard UL 514B
Request for a quoteJACOB GMBH
Germany
Ex-screw plug for the secure sealing of unused threaded or clearence holes. Suitable for applications in hazardous areas. Features: — Group (Zone) II 2 G (1, 2) II 2 D (21, 22) — Marking Ex eb IIC Gb Ex tb IIIC Db — Temperature range -40 °C / + 85 °C — Protection grade IP66 / IP68 - 10 bar (30 min.) — EU-Type certificate PTB 16 ATEX 1006 — IECEx-Certificate IECEx PTB 16.0017
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Temperature range: -100 °C to +260 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Temperature range: -100 °C to +180 °C continuous Wire type: Silicone, Tmax: +180 °C continuous
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Temperature range: -100 °C to +450 °C continuous Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Temperature range: -100 °C to +260 °C continuous Wire type: Teflon with CU shielding, Tmax: +200 °C continuous
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5622E with 4 slots and FI/LS protection. The housing is made of stainless steel. The door can be locked with a profile half cylinder lock, even with standard plugs inserted. The surface-mounted wall distributor 5622E is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
A large selection of universal dust caps and threaded plastic caps.
Request for a quoteSHENZHEN PROMOSTAR HARDWARE CO.,LTD
Germany
Precision and complex machining.mask the hole and thread and then procedure in anodize.
Request for a quotePRESSTA EISELE GMBH
Germany
Double mitre saw with a fixed unit on the left and the other one movable. Automatic positioning of the movable unit. Pneumatic tilting of the heads (90°, 45° or 22,5°). The intermediate degrees can be obtainedby manually setting mechanical stops. Realized with cutting lenght of 4000 mm (7650 mm with accessories), 5000 mm (9650 mm with accessories), 6000 mm (11650 mm with accessories). It is equipped with the system EC 609. Electro-welded sheet base which has been designed in such a way to offer the maximum rigidity and use practicality. Frontal and straight blade feed with speed adjustments. Hydro-pneumatic blade feed. Wide cutting capacity by means of sawblades Ø 450 mm. Possibility to use a blade with a dia. 500 mm, only by eplacing the tool. Dynamic protection guards for a total covering of the cutting area. Mist spray lubrication tools (Venturi system). Pre-arranged to connect an exhaust extractor for swarfs. Pre-arranged to use a set of tanks to collect swarfs. Pre-arranged...
Request for a quoteSCHWEIZER GMBH & CO. KG
Germany
Everything about the power supply. Switches, fuses and main power switches for motorsport.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
POREX TECHNOLOGIES GMBH
Germany
Optimize insecticide release performance Repel pests in the home with both porous fiber and sintered particle wicks designed for plug-in insecticides. POREX ® wicks deliver insecticide from the bottle or container to the heater using capillary action, and then diffusing the insecticide into the air at a high temperature. To optimize performance or to meet specific design criteria, our wicks are available with different capillary levels, and multiple wicks can be used in one device to optimize performance or meet specific design criteria. Porous fiber wicks work well at high temperature, achieving a high release of insecticide per day, while our sintered particle wicks deliver a consistent insecticide release over the life of the product. Both types of wicks are available in many shape options, including 2D shape capability for the porous fiber technology and 3D shape capability for the sintered particle technology. Features High temperature effectiveness Engineered capillary...
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
Wall distributor 5606E with 6 slots. The housing of the wall distributor is made entirely of stainless steel. The door can be locked with a profile half cylinder lock and can also be closed with standard plugs inserted. The 5606E on-wall distributor is suitable for indoor and outdoor use, protection class IP 44 (electrical units). The wall distributor is delivered in the special colors DB701 or DB703 (gray tones) as standard. Coating in RAL colors is also possible on request – other colors can only be implemented at an additional cost.
Request for a quoteGHM MESSTECHNIK GMBH
Germany
Filter module Frequencies from 10 Hz..10 kHz Butterworth/Bessel characteristics Low ripple < 2 mVpp
Request for a quoteGHM MESSTECHNIK GMBH
Germany
Filter module Frequencies from 10 Hz..10 kHz Butterworth/Bessel characteristics Low ripple < 2 mVpp
Request for a quoteGHM MESSTECHNIK GMBH
Germany
Filter module Frequencies from 10 Hz..10 kHz Butterworth/Bessel characteristics Low ripple < 2 mVpp
Request for a quoteGHM MESSTECHNIK GMBH
Germany
Filter module Frequencies from 10 Hz..10 kHz Butterworth/Bessel characteristics Low ripple < 2 mVpp
Request for a quoteTOX-DÜBEL-TECHNIK GMBH
Germany
Features • Just knock in: simple and fast • For wood components • Impact lock prevents premature spreading • Buttress thread • Fast and economical push-through installation • Nail screw can be easily screwed in and out as required Description & Area of Application • 2-way split spreader element with impact lock • Countersunk head • Pre-assembled, galvanized nail screw with buttress thread • Countersunk head and PZ drive
Request for a quoteSCHNIEWINDT GMBH & CO. KG
Germany
CSN® Explosionproof screw plug or flanged immersion heaters ( Ex ) are perfectly suited for direct heating of liquids or gas / air mixtures in hazardous areas. The devices are available with attached or integrated temperature monitoring systems. For these heaters various high quality stainless steel grades are available. The electical immersion heater type 94./..EEs….T.(.) is designed for the heating of liquids and quit gasair mixtures in the zone 1 and zone 2. The standars elements, mentioned in this list are suitable for DGRL (code 97/23/EG) Art. 3 Para. 3. The elements can be suited (on request) to other uses requiring another classification according to DGRL.
Request for a quoteGHM MESSTECHNIK GMBH
Germany
Sensors are often installed in difficult-read positions. The GIA 0420-M12 plug-in display from the GHM GROUP can be turned in all viewing directions to enable readings of critical measurements directly at the location. Sensor manufacturers, plant builders and operators benefit from a flexible display device that can be installed even more easily with the worldwide standard M12 plug connection.
Request for a quoteBS BODENSTECKDOSEN SYSTEMTECHNIK GMBH
Germany
CEE floor tank 6523Q with a stainless steel housing. The lid closes watertight, protection class IP 65, and has an internal tube for using the tank when the lid is closed. Degree of protection with tube: IP21. Further configuration variants on request.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Multiple connectors for thermocouple and RTD circuits. Suitable for direct connection of up to 6 circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Corresponds with Standard Vertical Panel Type “PASV-(…)” and Sandard Multiple Jack Type “MJS-(…)”.
Request for a quoteTHERMA THERMOFÜHLER GMBH
Germany
Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. The third contact for ground or continuous shield or for three wire RTD´s. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.
Request for a quoteResults for
Plugs - Import exportNumber of results
193 ProductsCountries
Company type
Category