Plug connector - Import export

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

- Whitworth pipe thread DIN ISO 228 - Chambered O-ring - Seals FPM - Material with media contact: Brass, dezincification resistant - Material without media contact: Brass - Temperature range: -20 to +120 °C - Working pressure range: -0.95 to 16 bar - cooling water, air, vacuum

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Seals NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, not designed for steady motion of the tube - Not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling - but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Not designed for steady motion of the tube

- Whitworth pipe thread - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - swiveling, but not designed for steady motion of the tube

- Metric thread- With hexagon socket - Chambered O-ring - Seals FKM - Material 1.4301 / 1.4307 - Temperature range: -20 to +120 °C - Pressure range: -0,95 to 16 bar - Media: Air, vacuum and liquids

- Thread metric - Chambered O-ring - Seals FPM - Material stainless steel AISI 304/ 304L (1.4301/1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Short design (throttle)- Adjusting screw with knurl - Fine adjustment with a noticeable click - Whitworth pipe thread - Seal in connection FPM - Material: brass nickel-plated - Type: Cone-type throttle - Allowable medium: Air, Oil - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0,95 to 16 bar)

- Metric thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Swiveling, but not designed for steady motion of the tube

Field-wireable connectors are available in sizes M8 × 1/Ø 8 mm, M12 × 1, 1/2", 7/8", M16 × 0.75, M23 × 1 and also as valve plug. The connectors make installation easier in applications in which it is difficult to estimate the needed cable length.

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Jab-in cover allow easy connection without need cover removal. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection

4 or 5-pin socket Straight or angled Connection with screw clamps Plastic housing

Use: Connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. The third contact for ground or continuous shield or for three wire RTD´s. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

The kiro multi sensor node measures temperature, humidity, air pressure and brightness. The measured values are transferred to a cloud. This version provides an SMA antenna connector as well as an M8 connector for PT1000.

Use: Multiple Jack for thermocouple and RTD circuits. Suitable for connecting up to 6 standard circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Incorporates a standard vertical panel, Type “PAV-(…)”.

Use: Multiple connectors for thermocouple and RTD circuits. Suitable for direct connection of up to 6 circuits simultaneously. Mechanical design: • Strong steel plate housing, coated with epoxy resin. • Anodised aluminium handle for easy disconnection of the plug connectors. • Available with contacts for 1 to 6 measurement circuits. • Corresponds with Standard Vertical Panel Type “PASV-(…)” and Sandard Multiple Jack Type “MJS-(…)”.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

This EtherCAT I/O module has been specifically designed with industrial environments in mind. Its IP 65 protection allows its installation anywhere at the machine making switching cabinets and further housings more or less redundant. You may mount the unit directly on a base plate. Due to the modules integral plug connector system, sensors and actuators are never far away from the modules. Standardised cable connections reduce mounting times while enhancing the security of the wiring. The IP65 EtherCAT I/O modules are intended for mechanical & plant engineering applications also in conjunction with systems other than those supplied by Kendrion Kuhnke Automation.

The profiled guide slide PFS is available in 5 series with sizes from 100 mm up to 425 mm width and strokes up to 2000 mm. To protect them against dirt accumulations, the slides are covered with bellow covers. Other covers on request. The slides are available in aluminium (nature anodized), or casted iron GGK-25. Optional steel C-45. The ball thread spindle drives are available in the qualities T5 and T7 with spindle pitches from 5 to 50 mm. PFS (basic equipment) ball screw spindle acc. to standard type allocation screwed up bellows cover coated on both sides integrated inductive limit switches (PNP break contact) incl. plug-connector in the endplate

— Touchless and wear-resistant optical incremental encoder — Supplies 2 quadrative, TTL-compatible channels with phase 110° — Connectors e.g. Molex plug 5-pole type 5051 with contects type 2759 — Optional: reference pulse — Operating voltage = 5V

— Touchless and wear-resistant optical incremental encoder — Supplies 2 quadrative, TTL-compatible channels with phase 110° — Connectors e.g. Molex plug 5-pole type 5051 with contects type 2759 — Optional: reference pulse — Operating voltage = 5V

The CEE floor box 6610A consists of a housing in stainless steel 1.4301 (3 mm) and a lockable, 20 mm thick lid made of anodized aluminum. When closed, the CEE floor box is not waterproof. In the outdoor area, a drain pipe must be provided on-site to drain the housing. Due to the surface load of 6.5t, this version can be driven on with a truck if it is properly installed and the lid is completely closed. The lid opens with the help of a gas pressure spring and can be closed with plugged-in connectors. Further configuration variants on request.