Results for
ANKLAM EXTRAKT GMBH
Germany
All high quality plant extracts of Anklam Extrakt GmbH are listed here: Passionflower Herb Extract Purple Coneflower Dried Pressed Juice Ivy Leaf Extract Cranberry Extract Artichoke Leaf Extract Elderberry Extract Marshmallow Root Extract Mate Leaf Extract Lemon Balm Leaf Extract Pumpkin Seed Extract Sage Leaf Extract Sea Buckthorn Berry Powder Hawthorn Leaves and Flowers Extract
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Railing system secured by superimposed load for installation on private or public flat roofs with a pitch of up to 3°. System with a patented adjustable foot that permits exact 3D positioning of the posts when applied to roofs with varying pitches.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Edge Elements made from stone fibre slabs to enclose elevated greening areas (e.g. elevated planting beds) and separate structure levels of different heights.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigrun Edge Elements made from aluminium as enclosure for extensive and intensive green roofs, for enclosing raised intensive greened surfaces and as borders between different surface types.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Planters made from stone fibre slabs, in standard and custom shapes and sizes with overflow and, as required, with reinforcement fitted with adhesive and screws. On request, available with automated irrigation unit and water level indicator.
Request for a quoteOPTIGRÜN INTERNATIONAL AG
Germany
Optigreen Aluminium Planter for installation outdoors on roof areas or in earthbound open spaces and for installation indoors. Planter made from aluminium in standard and custom sizes with overflow, insulating cladding, and, where required, with welded junction plates as reinforcement. On request, available with automated irrigation unit and water level indicator.
Request for a quoteELKON GMBH
Germany
Being produced in ELKON’s latest tech production facilities, mobile continuous mixing plants (pugmills) can be easily transported via axle and tyres installed on the main unit. Thanks to its superior mobile design, these plants are installed on a flat concrete surface without foundation requirement and can be relocated easily so that the user doesn’t have to travel long distances for material transportation. These mobile pugmill plants are mainly used for for subbase (stabilization) material with / without cement production and RCC concrete for dam or road pavement projects. Mobile continuous mixing plants, also known as WOLF in ELKON’s product range, are equipped with 5000/2500 l. ELKON continuous twinshaft mixer. All materials are mixed passing through ELKON C200 mixer continuously according to the recipe and flow speed.
Request for a quoteELKON GMBH
Germany
The latest design of ELKON innovation team, ELKON MIX MASTER-30 On-site Concrete Batching Plant, makes it possible to produce concrete wherever needed according to international standards in a very economical way even for small projects that require relatively small quantity of concrete. ELKON Mix Master-30 On-Site Concrete Batching Plant which can be ready for concrete production within 1 hour in wherever concrete is required, provides the following advantages - Quick installation without crane and quick relocation (only 1 hour) - No need for any concrete foundation - Installation on a very small space - Transportable by towing on roads - Cost effective shipping to overseas (can be fit into 1 unit 40’OT Container along with the bag cement feeding system) - No permission required for concrete production - Allowing concrete production on site, significantly reduces the concrete transportation cost - High quality and precise concrete production
Request for a quoteERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
One particular challenge in the refrigerator recycling process is presented by chlorofluorocarbons such as R 11, R 12 or R 141b, which were used for decades as foaming agents for insulation materials. Since these substances damage the Earth’s ozone layer when released, they must be removed and collected securely in a closed-system pre-processing plant. With ERDWICH, you are assured of the latest, technologically advanced solutions: Whether you’re handling small-scale units or complex refrigeration plant: utilise the expertise we’ve gained in processing over 30 million refrigerator units. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!
Request for a quoteERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
In metal-working shops utilising swarf-producing manufacturing techniques, the generated swarf is often an underestimated cost factor that influences the service life and productivity of the expensive machine tools: The key challenge here is therefore process reliability. For efficient swarf management, ERDWICH offers proven centralised and decentralised solutions with the following benefits: Whether centralised or decentralised, Erdwich lets you handle swarf management in double-quick time. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!
Request for a quoteERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
Analytical shredding systems for QA work are a fundamental preliminary component in the production of substitute fuels. Businesses that buy in their substitute fuel from external suppliers are faced with two key analytical requirements before putting it to use: pollutant analysis and calorific analysis. To ensure the proper handling of these analyses, a sophisticated sampling system is required, meeting the following criteria. Combining over 30 years of experience and the deployment of our proven single-shaft shredder, ERDWICH has developed an automated, integrated system that sets new standards in the areas of sampling and process reliability. Utilise market-leading ERDWICH technology to ensure your success in the substitute fuels sector. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!
Request for a quoteERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
The reclamation of valuable resources from electrical and electronic scrap – a global volume in excess of 40 million tonnes/year – is one of the greatest challenges facing our society. With additional support from WEEE Directive legislation, this represents enormous growth potential for recycling companies in all consumer-oriented markets. For many years now, ERDWICH has specialised in the reclamation of valuable primary materials from electronic waste with its turnkey system solutions. ERDWICH pre-processing: All process execution is fully compliant with the new DIN EN 50625/1 rules. Whether you need to handle electrics/electronics, small/large household appliances or specialist items such as fluorescent lamps, PCBs, LCD monitors and PV modules, whether as a mobile or stationary solution: create new value from electronic waste with ERDWICH. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your...
Request for a quoteERDWICH ZERKLEINERUNGS-SYSTEME GMBH
Germany
The shredding and sorting of rubbish and refuse is one of the key challenges within the waste management cycle. And with ERDWICH systems, there is a perfect set of solutions for meeting any of these application scenarios: System solutions range from simple shredding machinery through waste volume reduction plant to complete turnkey facilities for shredding and sorting. Deployed in waste sorting facilities, waste incineration plant, hospitals, major catering businesses, light and heavy industry, composting firms or waste reclamation units, ERDWICH wastes no time with waste. With hundreds of machines and systems deployed worldwide, use market-leading ERDWICH technology to ensure your success in special waste recycling. To get an idea of what we’re capable of, please see the following Case Studies. Now it’s your turn: we look forward to receiving your project enquiry!
Request for a quoteIGUS® GMBH
Germany
- Low-maintenance system for travel up to 100 m - Other sizes and versions available, travel up to 200 m and more with E2 roller e-chains® - Protection against weather and dirt exposure - Cost-effective and fully enclosed complete solution - Standardized and modular design - Simple wall assembly or optional floor mounting - Cable lengths up to 50% shorter than festooning, low-profile installation and no cable junction - Cables are at all times guided with a defined bending radius, and tensile forces are absorbed by the e-chain® - Cables cannot hook, jam, or tear - No slip ring contacts (as is the case on motor drums) -Cables or hoses can easily be retrofitted at any time Reduce electricity costs - direct drive due to scraper, no additional drives needed (as is the case on motor drums) Scraper arm (e.g. as mechanical connection to the scraper carriage) optionally available - we document the situation on-site and will propose a customised solution
Request for a quoteZWP ZAHNRADWERK PRITZWALK GMBH
Germany
We manufacture gears, gear rings and toothed shafts for various applications in industry with a focus on mechanical engineering and heavy machinery. Our customers come from a wide range of industries: railway, wind power, marine, industrial gearboxes, oil and gas extraction, crane construction or construction machinery as well as special machines. We also supply the retrofit industry and manufacture the parts in small series or individual production. Depending on the dimension a quality of 4 can often be achieved. We examine the possibilities without obligation and without charge. Our customers include renowned and well-known companies. References to your industry on request. We manufacture according to customer drawings and have our own hardening plant. This saves time and costs during production. Cooperation exists for gas nitration and single-tooth induction hardening with experts in their field. ZWP supports you in the modernization of plants and machines (Retrofit).
Request for a quoteBORSIG GMBH
Germany
Transfer Line Exchangers (tunnelflow and linear quench coolers) from BORSIG are used in plants producing ethylene, an important starting material for plastics manufacturing. In these ethylene plants our transfer line exchangers are rapidly cooling down the so-called cracked gas in order to obtain the optimum yield of ethylene. BORSIG Transfer Line Exchangers are the result of more than 50 years experience and about 7,500 units have been supplied worldwide between 1965. BORSIG Process Heat Exchanger GmbH has developed two design types of quench coolers, reflecting the customer`s plant concept: 1. "Tunnelflow" transfer line exchangers (shell & tube design) 2. BORSIG "Linear" transfer line exchangers (double-pipe design)
Request for a quoteBORSIG GMBH
Germany
BORSIG supplies synthesis gas boilers for gas pressures up to 350 bar (35,000 kPa) and steam pressures up to 160 bar (16,000 kPa). They are used in the synthesis gas loop of ammonia plants. The boilers are equipped with U-tubes and can be mounted both in the vertical as well as in the horizontal positions. With both designs, the steam drum can be integrated into the boiler if requested by the customer. At the same time, a feed water pre-heater can be installed in the boiler when required.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
BÜRKLE GMBH
Germany
The sample drill for stalk material is a sampler especially for hay, silage, straw, herbs, bushes or other stalky plant dry material where other drills quickly get tangled. The special geometry of the drill tip cuts effectively and quickly into different stalky materials. The hay and silage sample drill takes samples quickly, cleanly and easily from a silo or bale. Sampling with mechanical assistance from a drill or powerful cordless screwdriver allows the sample to be taken effortlessly with little manual effort. The sample drill can be used flexibly both horizontally (sampling from the side) and vertically (sampling from above). The robust and durable tube drill is completely made of stainless steel 1.4404/1.4034 (316L/420) or aluminium/stainless steel 1.4034 (420). The practical ejector helps to empty the sample from the sample drill.
Request for a quoteELKON GMBH
Germany
Being produced in ELKON’s latest tech production facilities, stationary continuous mixing plants (pugmills) are mainly used for subbase (stabilization) material with / without cement production and RCC concrete for dam or road pavement projects. Equipped with 5000/2500 l. capacity ELKON continuous twinshaft mixer, there two models of pugmill plants, 300 tons/h and 500 tons/h capacity. In this mixing plants, thanks to aggregate bins equipped with dosing belts, it’s possible to adjust material flow rate by means of frequency inverters. Cement flow rate can also be precisely adjusted by a screw equipped with frequency inverter whilst the water flow by a proportional valve. All materials are mixed passing through ELKON C200 mixer continuously according to the recipe and flow speed.
Request for a quoteELKON GMBH
Germany
ELKON, with its tailor made precast concrete plants commissioned all over the world, offers high quality solutions for precast industry wherever concrete is needed. ELKON precast concrete batching plants are used for production of precast concrete products such as concrete pipes, concrete paving blocks, hollowcore, etc. They can be equipped with one mixer or more in various capacities and can be specially designed according to factory layout, product type and concrete transfer method. ELKON precast concrete batching plants general features Custom-tailored solution to accommodate exact needs of project Custom-made design according to factory layout Completely customizable concrete transfer system High weighing accuracy Optimized concrete production and concrete transfer for the project with special automation system Continuous and high quality concrete production
Request for a quoteELKON GMBH
Germany
ELKON stationary concrete batching plants have been manufacturing since 1980’s. ELKOMIX-240 stationary concrete batching plant from the series is equipped with 9000/6000 l. twin shaft mixer. ELKOMIX-240 Stationary Concrete Batching Plant which has 240 m³/h concrete production capacity is the product of ELKON’s high quality and advanced technology, provides following advantages to its users - Flexibility in the configuration - High production performance and high productivity - Easy installation due to its modular structure - Variable layout options - Wide operating and maintenance areas - Easy maintenance and low operating costs
Request for a quoteELKON GMBH
Germany
ELKON stationary concrete batching plants have been manufacturing since 1980’s. ELKOMIX-200 stationary concrete batching plant from the series is equipped with 7500/5000 l. twin shaft mixer. ELKOMIX-200 Stationary Concrete Batching Plant which has 195-200 m³/h concrete production capacity is the product of ELKON’s high quality and advanced technology, provides following advantages to its users - Flexibility in the configuration - High production performance and high productivity - Easy installation due to its modular structure - Variable layout options - Wide operating and maintenance areas - Easy maintenance and low operating costs
Request for a quoteELKON GMBH
Germany
ELKON stationary concrete batching plants are being manufactured since 1980’s. ELKOMIX-160 stationary concrete batching plant from the series is equipped with 6000/4000 l. twin shaft mixer. ELKOMIX-160 Stationary Concrete Batching Plant which has 150 m³/h concrete production capacity is the product of ELKON’s high quality and advanced technology, provides following advantages to its users - Flexibility in the configuration - High production performance and high productivity - Easy installation due to its modular structure - Variable layout options - Wide operating and maintenance areas - Easy maintenance and low operating costs
Request for a quoteELKON GMBH
Germany
ELKON stationary concrete batching plants are being manufactured since 1980’s. ELKOMIX-135 stationary concrete batching plant from the series is equipped with 4500/3000 l. twin shaft mixer. Moreover, it can also be manufactured without mixer for dry type concrete production. ELKOMIX-135 Stationary Concrete Batching Plant which has 120-135 m³/h concrete production capacity is the product of ELKON’s high quality and advanced technology and provides the following advantages to its users - Flexibility in the configuration - High production performance and high productivity - Easy installation due to its modular structure - Variable layout options - Wide operating and maintenance areas - Easy maintenance and low operating costs
Request for a quoteELKON GMBH
Germany
ELKON Stationary Concrete Batching Plants are being manufactured since 1980’s. ELKOMIX-120 stationary concrete batching plant from the series, depending on the application, can be equipped with 3000/2000 l. pan, planetary or twin shaft mixer. Moreover, it can also be manufactured without mixer for dry type concrete production. ELKOMIX-120 Stationary Concrete Batching Plant which has 105 m³/h concrete production capacity is the product of ELKON’s high quality and advanced technology and provides the following advantages to its users - Flexibility in the configuration - High production performance and high productivity - Easy installation due to its modular structure - Variable layout options - Wide operating and maintenance areas - Easy maintenance and low operating costs
Request for a quoteELKON GMBH
Germany
ELKON stationary concrete batching plants are being manufactured since 1980’s. The lowest capacity one in this series is ELKOMIX-60 Stationary Concrete Batching Plant, depending on the application, can be equipped with 1500/1000 l. pan, twin shaft or planetary mixer. Moreover, it can also be manufactured without mixer for dry type concrete production. ELKOMIX-60 Stationary Concrete Batching Plant which has 60 m³/h concrete production capacity is the product of ELKON’s high quality and advanced technology and provides the following advantages to its users - Flexibility in the configuration - High production performance and high productivity - Easy installation due to its modular structure - Variable layout options - Wide operating and maintenance areas - Easy maintenance and low operating costs
Request for a quoteELKON GMBH
Germany
ELKON Mobile Master-150 ELEPHANT Mobile Concrete Batching Plant is not only the highest capacity of ELKON Mobil Master Series but also the highest capacity mobile concrete batching plant in the world within this concept (the main unit is pulled and transported by only 1 truck trailer). ELKON Mobile Master-150 ELEPHANT Mobile Concrete Batching Plant is equipped with 6750/4500 l. twin shaft mixer and reaches 150 m3/h vibrated concrete production capacity. It provides the following advantages to its users - Quick and easy installation (2-3 days) - Cost-effective transportation (the main unit can be transported by one truck trailer) - Due to the special design, it can be installed on a confined space - Quick and easy jobsite relocation - Low foundation cost (installation is on a flat surface) - Minimizes the concrete transportation cost and environmental impact as well - Easy maintenance and low operating cost - High production performance with optimized automation system
Request for a quoteELKON GMBH
Germany
ELKON Mobil Master-135 JAGUAR Mobile Concrete Batching Plant provides high production capacity along with all the advantages of a mobile concrete batching plant. It has 110 m3/h vibrated concrete production capacity with 4500/3000 l. twin shaft mixer. Besides 4x22,5 m³ capacity square type aggregate bin, 4x20 m³ capacity linear type aggregate bin option is also available which is equipped with axles and tires. ELKON Mobile Master-135 JAGUAR provides the following advantages to its users -Quick and easy installation (only 1-2 days) -Cost-effective transportation (the main unit can be transported by one truck trailer) -Due to the special design, it can be installed on a confined space -Quick and easy jobsite relocation -Low foundation cost (installation is on a flat concrete surface) -Minimizes the concrete transportation cost and environmental impact as well -Easy maintenance and low operating cost -High production performance with optimized automation system
Request for a quoteELKON GMBH
Germany
ELKON Mobile Master-100 LION Mobile Concrete Batching Plant is equipped with 3000/2000 l. twin shaft mixer, produces 2 m³ in every batch and reaches the capacity of 90 m³/h of vibrated concrete, whereas ELKON Mobile Master-100 LION+ Mobile Concrete Batching Plant is equipped with 3750/2500 l. twin shaft mixer and reaches the production capacity of 100 m³/h of vibrated concrete. It provides the following advantages to its users - Quick and easy installation (only 1-2 days) - Cost-effective transportation (the main unit can be transported by one truck trailer) - Due to the special design, it can be installed on a confined space - Quick and easy jobsite relocation - Low foundation cost (installation is on a flat concrete surface) - Minimizes the concrete transportation cost and environmental impact as well - Easy maintenance and low operating cost - High production performance with optimized automation system
Request for a quoteResults for
Plant - Import exportNumber of results
115 ProductsCountries
Company type
Category