Results for
BEKO TECHNOLOGIES GMBH
Germany
BEKOSPLIT splitting plants clean emulsified condensates which occur as a result of unfavourable initial conditions or of certain lubricant/compressor combinations. In addition to compressed-air condensate, other oil-containing industrial wastewaters can also be processed. Water-insoluble organic substances and a large variety of solid contaminations are removed from the water. Any heavy metals, dirt and paint particles contained in the water are reliably adsorbed
Request for a quoteINOX VERTRIEBS GMBH
Germany
INOX® gloss dryer is a product composed of special wetting agents, which is quickly absorbed by the paint and causes the water film to disappear quickly. The paint gets an even gloss and an optimal color deepening. The cationic surfactants cause the special waxes to be deposited in a thin layer on the paint surfaces and to spread evenly as a film. The applied special waxes are hard and therefore give the paint surfaces a long-lasting protective film.
Request for a quoteASP GERMANY
Germany
Paint stripping by high-pressure water blasting is very aggressive: splash back from jets, paint flakes, etc. For this reason, ASP has developed some original and effective solutions to keep your robot clean and to preserve its condition. Made from coated fabric, ASP’s covers are always the ideal solution for your robot protection problems. They are well-suited to painting processes (silicone free).
Request for a quoteASP GERMANY
Germany
Paint stripping by high-pressure water blasting is very aggressive: splash back from jets, paint flakes, etc. For this reason, ASP has developed some original and effective solutions to keep your robot clean and to preserve its condition. Made from coated fabric, ASP’s covers are always the ideal solution for your robot protection problems. They are well-suited to painting processes (silicone free).
Request for a quoteRIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Infrared ovens are suitable for powder, solvent-based and water-based paints. IR dryers Infrared ovens are particularly suitable for high material thicknesses or temperature-sensitive workpieces. In the drying of paint, infrared heat is often superior to conventional air drying, because the radiation penetrates the material and dries the paint film from the inside outwards. This hinders the formation of a skin or blisters on the surface and accelerates the drying of the paint. The result is a brilliant surface quality. On account of their outstanding powder wetting, these dryers are frequently used as gelling zones before powder enamelling furnaces. Advantages
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
RIPPERT ANLAGENTECHNIK GMBH & CO. KG
Germany
Water-sprinkled spray walls and spray booths with automatic paint sludge filtration system In wet separation, the overspray meets the water film of the spray wall and is thereby bound in the water. The sludge formed by this is discharged using sludge filtration systems. Water-sprinkled spray walls The overspray is sucked in in the lower area of the vertical water drain surface and is bound in water when it meets the film of water. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. In order to replace the water lost due to evaporation, it is recommended to fit an automatic water level controller. The entire quantity of water is fed to the automatic paint sludge filtration system via the disposal pump. A coagulant is added to the water by an automatic dosing unit, as a result of which the paint sludge in the circulating water is disbonded and can be separated more easily. The cleaning of the circulating water takes place in the separately arranged paint sludge filtration system. Depending on the paint system and plant version, the separation system is operated using a full or partial current method. Water-sprinkled spray walls/booths with underfloor paint mist extraction For the painting of large parts with a high paint throughput. The paint mist is sucked in under the grating cover. A substantial part of the overspray is already bound in the water by the constant sprinkling of the entire floor of the basin. The paint mist is washed out further in the lower section of the washout tower using a vortex washing system with downstream baffle plate separator. Optimum capture of the paint mist is guaranteed by the laminar air flow inside the booth. A further advantage over comparable systems is the low water basin height and the associated low foundation depth. The sludge formed by this is discharged using sludge filtration systems. Advantages
Request for a quotePNZ-PRODUKTE GMBH
Germany
Suitable for any wood indoors, such as furniture, doors, cork, boards, glued wood and plywood, tongue and groove boards and toys made of any kind of wood. Bio Furniture and Toy Paint is highly water-repellent and offers long-term protection for treated surfaces. Our product is drop reduced, open-pore, humidity regulating and odorless.
Request for a quoteOSMO MEMBRANE SYSTEMS GMBH
Germany
Ultrafiltration of kathodic deposition paint The filtrate of the ultrafiltration is added to the immersion bath by a spray ring, which is installed directly over this bath. So, the recovery of the remaining color is possible and by separation the color particles, painting defects can be avoided. In the last spray zone, organic solvents from the ultrafiltration are washed away be demineralised water. Concentrated with these solvents, the water is leaded into the color bath. The process is a closed loop without any waste waters. The paint bath can be contaminated with pre-tretment chemicals like e.g. phosphates, chlorides, chromates. so, a part of ultrafiltrate has to be leaded out to avoid concentration of the paint bath with these chemicals. If no ultrafiltration is used, big amounts of waste waters will arise, which are difficult to dispose. Our ultrafiltration plants are customized in membrane are, retention rate and membrane type.
Request for a quoteVENJAKOB MASCHINENBAU GMBH & CO KG
Germany
This "stand-alone solution" is designed to meet flexible production requirements and can be used for solvent and water based paints. This spray coating machine is both economical and environmentally friendly. It can optionally be equipped with a belt cleaning system and/or a paper transport belt.This makes it possible to alternate between both modes of operation. A quick change between two paint systems (water/solvent based) is simple and fast. This makes it especially attractive for smaller companies to replace manual painting. Working width: 1,300 mm, Working height: 920-960 mm, Machine dimension: 1,900 mm (length) Feed speed: 2-4 m /min. Exhaust air volume: 7,000 m³/h, Supply voltage: 9.6 kW/ 12 A,
Request for a quoteRIGA WOOD GMBH
Germany
Riga Ignisafe Birch plywood impregnated with fire retardant. Types Riga Ply (raw plywood), BB/BB, BB/WG or WG/WG Riga Form overlaid on one face with a dark brown phenol film (F I/BB, F I/WG) Fire classes / standards It is possible to impregnate in conformity with: C s1 d0 (C class) according to EN 13501 (application – walls and ceiling) B s1 d0 (B class) according to EN 13501 (normally required in higher risk areas such as escape routes and staircases) M1 class according to French Standard NF F 16101 (requirements for materials with application in railway industry) Application Anywhere where high fire safety is required – mostly in transport and building industry. Riga Ignisafe is normally for interior applications (epoxy, polyurethane and alkyd paints are recommended) In outdoor use the surface must be protected by paint (water-soluble latex paint) Finishing material can significantly affect conformity to the fire class. Painting should be done according to the paint manufacturer's instructions. Riga Ignisafe must not be heated above 100 0C. Advantages Riga Ignisafe significantly slows down fire spread, reduces heat and smoke generation, ensures extra evacuation time, thus saves lives and restricts damage costs Riga Ignisafe can be painted and glued Overlaying Riga Ignisafe is without overlay or is overlaid on one face with a dark brown phenol film. Impregnation Plywood is impregnated with a fire retardant. Impregnation can affect strength parameters; however they will exceed standard minimum requirements. Sizes 1220 mm x 2440 mm 1250 mm x 2500 mm 1220 mm x 3000 mm 1250 mm x 3000 mm Cut to size panels and machining available in accordance with the customers’ requirements. Thickness 9, 12, 15, 18, 21, 24 mm. Other thicknesses available upon requests.
Request for a quoteVENJAKOB MASCHINENBAU GMBH & CO KG
Germany
To conform to market requirements, widely differing machines for painting/coating mouldings, window parts and other profile components were developed. The type and number of guns depends both on the paint system and on the quality envisaged. Air, Airmix or Airless spraying systems can be used for this purpose. The individual machine types can be configured with all conveyor systems of our portfolio and combined with the respective drying systems. The difference between the VEN SPRAY MOULD (LT) and (LW) variants is their type of extraction. LT stands for dry extraction, LW for water-backed extraction. VEN SPRAY MOULD COOLAC is exclusively designed for processing water-based paints. The overspray is constantly collected and condensed in chilled collector systems. The condensation of the controlled air humidity keeps the collector devices and chilled conveyor systems permanently wet. This reliably prevents paint particles from drying during operation. The strip painting plants can be supplemented by further Venjakob plant technologies specifically tailored to the process such as brush sanding/denibbing machines, dryers or conveying equipment.
Request for a quoteVENJAKOB MASCHINENBAU GMBH & CO KG
Germany
With its VEN SPRAY PERFECT Venjakob has the innovative answer to all requirements encountered on the market. Based on decades of know-how in the realisation of high-performance spray painting plants, it is the flexibility of this new generation that convinces. In the long term, the modular system takes into account all production requirements. At the time of machine purchase, its concept realises all variants, from "one off batch size" through to large series production in the high-end range. The modular concept permits implementation of changing framework conditions at any point in time by retrofitting new modules, thereby making your investment future-proof. Working width: 1,300 / 1,600 / 2,200 mm Working height: 940 mm Feed speed: 3-8 m/min Exhaust air volume: 7,000 - 10,000 m³/h Connection value: 20 KW Machine dimensions: 2,280 / 2,800 mm (length of booth) The sophisticated spray gun control minimizes the rate of overspray. With the patented V-belt design up to 98 % of the liquid overspray can be reclaimed. The paint retrieved in this way is recycled into the paint process. Over and above, the innovative ventilation system improves the ecological energy balance. The short setup times, long service life of the filter elements, fast changing times for spray systems and automated paint-change procedures offer a very high degree of efficiency. The twin cleaning units allow the use of solvent-based paints as primer and the direct switchover in split seconds to the second cleaner operating with water-based paints. Maintenance and cleaning operations take place completely separate from the production process.
Request for a quoteSMITO-TECHNIC GMBH
Germany
Suitable for water-based paint strippers with operating temperatures of up to 90 °C. Modular design for the highest level of safety and (if needed) customization to the desired height of the spraying chamber. Electronics and paint stripping agent tank in separate "technical module." Uniform coating of the workpieces through the use of a nozzle system in the spraying chamber, consisting of needle-nose jet nozzles and flat-jet nozzles and a rotatable cage for the workpieces. High loading capacity by virtue of the cage diameter of 1500 mm and effective interior height of 2100 mm; max. cage load: 750 kg. Stripping agent tank: 1000 liters for long effective life of the medium, indirect electrical heating. All parts coming into contact with the media are made of stainless steel. Easy operation with clearly arranged displays and operating controls. High-quality Siemens control for monitoring the paint stripping process.
Request for a quoteResults for
Paint water - Import exportNumber of results
14 ProductsCountries
Company type