One place - Import export

Space-saving parking of one or two cars Park the car on the platform and let it magically disappear in a pit The car scissor lift VERTICAR from Lödige is a perfect solution for parking one or two cars in a very confined space. A significant advantage of VERTICAR is minimum space requirement. This is successfully achieved through the integration of the machine into a pit. Thanks to an overhead canopy, a flat and even surface is provided and the lifting table, i.e. the parking position is fully covered. As a result a vehicle is parked in a pit and the overhead surface remains completely intact. Furthermore, as it requires a low installation height, a classic shaft is not necessary. Benefits of the car scissor lift Saves on construction space as a ramp is not required Creates two car parking spaces in even the tightest locations Safe operation with fingertip control Bio-oil used to protect the environment

Use the basket stacking trolley for your 20 or 28 litre baskets and transport them comfortably from one place of use to the next. A stacking trolley can also be used practically as a basket collector in the checkout area. The basket stacking trolley can be used for both 20 and 28 litre baskets.

The ideal combination of slicing and weighing: Ergonomic, easy to clean, easy to operate, energy-saving. Ideal for all manual slicing tasks such as cooked ham, boiled and cooked sausages, sliced cheese or long-life goods such as salami and air-dried ham. Furthermore a space-saving solution if metrologically approved weighing for the sales counter and manual slicing in one place are requested. Operation is particularly easy thanks to a Ceraclean® surface with outstanding gliding properties, technically mature ergonomics and thus absolutely safe for the user. Removable parts are dishwasher safe and can be mounted in a flash. The Ceraclean® surface finish is very easy to clean.

The ideal combination of slicing and weighing: Ergonomic, easy to clean, easy to operate, energy-saving. Ideal for all manual slicing tasks such as cooked ham, boiled and cooked sausages, sliced cheese or long-life goods such as salami and air-dried ham. Furthermore a space-saving solution if metrologically approved weighing for the sales counter and manual slicing in one place are requested. Operation is particularly easy thanks to a Ceraclean® surface with outstanding gliding properties, technically mature ergonomics and thus absolutely safe for the user. Removable parts are dishwasher safe and can be mounted in a flash. The Ceraclean® surface finish is very easy to clean.

Easy to install people counter with access control system and traffic light suitable for retail, catering, pharmacies and service providers. The display stand is placed on one side of the entrance and a reflector on the opposite side. Once the desired maximum number of people has been set, the system is ready for use without the need for a connection to the network or Internet. As soon as more people than specified pass the entrance, this is indicated by means of a traffic light system on the stand. The "Extended" version consists of two devices that are connected to each other by means of a radio link, thus enabling use in premises with two entrances/exits.

The pharmaceutical and biotech industry involves a wide range of mixing tasks, for which precision and consistence are of utmost importance. Particles must be evenly suspended and homogenized in liquids for filling processes. In some cases, multiple processes, such as for example heat transfer, rapid mixing, or material transport, must take place simultaneously within one reactor. Specific requirements are often placed on the drives, if for example production is carried out under clean room conditions. The surface quality of the stirring elements must always meet the highest standards; they are therefore usually electropolished. Our agitator solutions for the pharmaceutical and biotech industry are engineered and manufactured to customer-specific requirements. Selection of the agitator, as well as of the drive and sealing concepts, depends on the process and customer specifications. We will provide all the necessary design calculations, or simulate the mixing process.

The original RINGFEDER ® Locking Assemblies featuring double-tapered thrust rings with self-releasing tapers. They bridge relatively large fit clearances, are easy to install, adjust or remove, but are not self-centering. A pre-centering hub section is usually required. Slimmest design, especially suitable for applications where space is limited. The Locking Assembly RfN 7012 compensates small tolerance deviations and compensates small mounting errors. Large transmittable forces and moments – several Locking Assemblies RfN 7012 can be placed one behind the other. The transmissible torque and axial forces are added - please take in this respect consulting with our technical experts. Bending moment and radial loads – combined loads can be transmitted. ( Please contact our technical department for assistance). Easy installation – RfN 7012 Locking Assemblies can bridge large clearances without the loss of transmission values. Low risk to contamination – during the tightening process...

Identical in design and function to the traditional 7012 device, this unit is made of stainless steel for applications requiring rust free installation. Torque capacity is somewhat reduced due to the nature of stainless steel. Slimmest design - especially suitable for applications where space is limited. The Locking Assembly RfN 7012 stainless compensates small tolerance deviations and compensates small mounting errors. Large transmittable forces and moments – several Locking Assemblies RfN 7012 stainless can be placed one behind the other. The transmissible torque and axial forces are added - please take in this respect consulting with our technical experts. Easy installation – in comparison to crosspress fits temperature treatments and fitting are eliminated. Locking Assemblies RfN 7012 stainless steel can cover a big fitting clearance. Low risk to contamination – during the tightening process the functional surfaces of the device and connection are pressed together generating...

The original RINGFEDER ® Locking Assemblies featuring double-tapered thrust rings with self-releasing tapers. They bridge relatively large fit clearances, are easy to install, adjust or remove, but are not self-centering. A pre-centering hub section is usually required. Slimmest design, especially suitable for applications where space is limited. The Locking Assembly RfN 7012 compensates small tolerance deviations and compensates small mounting errors. Large transmittable forces and moments – several Locking Assemblies RfN 7012 can be placed one behind the other. The transmissible torque and axial forces are added - please take in this respect consulting with our technical experts. Bending moment and radial loads – combined loads can be transmitted. (Please contact our technical department for assistance). Easy installation – RfN 7012 Locking Assemblies can bridge large clearances without the loss of transmission values. Low risk to contamination – during the tightening process...

Consisting of systainer® T-Loc V incl. EPP spray can insert A notch at the side of the opening allows spray foam cans with spray nozzles to be inserted Height: 130 mm, depth: 110 mm, diameter: 69 mm (Max. 14 spray cans) This insert allows you to securely organise spray cans in your systainer®, keeping them all in one place. Weight: 3.35 kg systainer® material ABS Spray can insert material: EPP moulded foam With EPP spray can insert Suitable for most common aerosol cans With additional holes for spray-tops

Consisting of systainer® T-Loc IV incl. EPP spray can insert A notch at the side of the opening allows spray foam cans with spray nozzles to be inserted Height: 130 mm, depth: 110 mm, diameter: 69 mm (Max. 14 spray cans) This insert allows you to securely organise spray cans in your systainer®, keeping them all in one place. systainer® material ABS Spray can insert material: EPP moulded foam with EPP spray can insert Suitable for most common aerosol cans With additional holes for spray-tops

The electro-pneumatic drive of the doctoring unit offers high speeds and the pneumatic pad stroke movement maximum flexibility. Superb accessibility on all four sides is guaranteed. Print image transfer takes place at only one workpiece position. Processes such as ink pick-up, ink transfer and ink residue pick-up system take place synchronously. A result is the high performance. Ink residue pick-up system and integrated VIPA S7 PLC control are a standard option. Program enhancement possible at any time. Up to 10 program variants per printing station can be stored. Memory cards for additional jobs can be integrated in the external operator panel.

PowerFlex is designed to be a robust, flexible and reliable conveyor solution for almost any operation requirement. Using its integrated handles and intuitive design, the conveyor can be contorted and shaped to fit into infinite environments. Its braked castors, 240v power supply and renowned latching connections make it an incredibly userfriendly piece of equipment. The PowerFlex SmartFlow platform differs from traditional PowerFlex with its distinct controls functionality. SmartFlow allows for multiple flow control options within one conveyor. Different user operations call for different equipment functionality – SmartFlow puts them all in one place. The selector switch is mounted on the unit’s selfcontained control box, which allows you to switch from 5 varying flow control modes. See below for further details. PFSF also retains all PowerFlex’s renowned functionality – simply connect multiple SmartFlow units to create whatever length is required.

Use with sodasan Rinse Aid and Dishwasher Salt for brilliant results without limescale spots and to protect your dishwasher. If you notice white limescale deposits on dishes or glassware, set the water softener in your dishwasher to a higher water hardness level. (See operating instructions) To protect the environment, only operate your dishwasher when it is full. Opt for wash cycles at lower temperatures and follow the dosage instructions. Dosage Remove foil and place one dishwashing tab in the cutlery basket or in the dishwasher detergent chamber. The dosage may be increased to 2 tabs for very dirty, greasy dishes. In order to avoid limescale deposits, make sure that you regularly add Dishwasher Salt and Rinse Aid. Tip: If limescale still remains on your dishes despite adding Dishwasher Salt, set the water hardness in your dishwasher to the next highest setting. Please do not use this product for leaded glass, hand-painted porcelain or silver. sodium carbonate trisodium citrate