Oil pump - Import export

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

Oil pumps especially suitable for gearboxes and dizzerial cooling. These small and compact pumps are ideally suited for continuous running and high temperature applications.

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor *optimized drum emptying * Optimized Drum emptying *infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

Dry sump oil pumps in modular design with 1 to 4 chambers. Delivery rates on the pressure side are a maximum of 29 liters per minute. The suction side maximum 24 liters per minute. Suitable for engines with a capacity of 2 to 8 liters

The industrial version of the progressive cavity pump HD-E-SR transfers the advantages of the drum pump to highly viscous media. With its easily detachable design and small outer diameter (max. 41 mm), it enables the filling of viscous liquids up to 30,000 mPas. The pump is easy to dismantle and clean and can be combined with electric or compressed air motors to facilitate the emptying of liquids and conserve resources. * Also available in special immersion depths * Examples of media: Oils, glucoses, waste oils, disposal liquids, * Optionally driven by electric or compressed air motors * Uniform volume flow * Lightweight and versatile due to low motor weight * Continuous, low-pulsation delivery of up to 15 litres/min * Low wear and tear * Easily detachable outer tube

Eccentric screw pump tube HD-E Industryfor oils, paints and disposal liquids is available in the food version (Pure) The HD-E Eccentric screw pump in the industrial version transfers the advantages of the Drum pump low-viscosity media quite simply to the medium-viscosity range. The positive displacement pump has an easily detachable outer tube, a bearing head with mechanical seal and a free-running shaft with an eccentric screw as the pumping element - all easy to dismantle and clean. The Pump tube can be suitably combined with our single-phase motor. This ensures the draining of liquids and thus saves important resources. * also available in special immersion depths * Pump tube equipped with Lutz original hand wheel * Media examples: Oils, waste oils, disposal liquids, paints. * Smooth running * Uniform volume flow * Gentle, low-pulsation product conveying * Low wear * Easily detachable outer tube

The double diaphragm pump 1 1/2" PVDF explosion-proof is suitable for large-scale industry and system feeding as well as for large flow rates and higher viscosities. * typical applications: Filter press, tank cleaning system, pigment dyes and resins * integrated silencer up to model size DMP 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & benefits * high hydraulic performance * maintenance-optimized design and easy installation * self-priming (even when dry) * absolutely oil-free * blockage-free operation * Pumps explosion-proof in accordance with ATEX directive (explosion protection)

The double diaphragm pump 2" PVDF explosion-proof is suitable for large-scale industry and system feeding as well as for large flow rates and higher viscosities. * typical applications: Filter press, tank cleaning system, pigment dyes and resins * integrated silencer up to model size DMP 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & benefits * high hydraulic performance * maintenance-optimized design and easy installation * self-priming (even when dry) * absolutely oil-free * blockage-free operation * Pumps explosion-proof in accordance with ATEX directive (explosion protection)

The double diaphragm pump is suitable for industrial applications as well as for emptying drums, IBCs and tanks. * typical applications: Transfer from drums and containers, transfer of corrosive solutions and chemicals * integrated silencer up to model size DMP 1" * highly resistant TFM (PTFE) diaphragms (modified PTFE) Features & benefits *high hydraulic performance *maintenance-optimized design and easy installation *self-priming (even when dry) * absolutely oil-free * blockage-free operation * Pumps explosion-proof in accordance with ATEX directive (explosion protection)

IDS 45 OIL HEATER FANThe robust IDS 45 oil fan heater for fast, uncomplicated heating - mobile heating power on wheels The professional heater fan IDS 45 is suited for an uncomplicated and quick heating of storage spaces, workshops, building sites, green houses or stables. Thanks to the integrated oil burner with Danfoss® pump it operates economically and effectively in every heating application. Owing to its robust design and convenient carriage, the device can quickly be transported from A to B by one person only and thus enables a quick change of location. Safety is the top priority of the oil heater manufactured in Europe. The housing is double-walled and with its protective coating provides an optimum soundproofing while simultaneously minimizing the surface temperature of the outer casing and thus the risk of injuries for the user.

Immersion heaters from 0,1 kW up to 300 kW for tank heating or as components for machines: - Lube oil heaters for compressors, pumps, turbomachinery, refrigeration machines and others - Tank heaters for oil, water and other liquids - Gas heaters for process applications - Anticondensation heaters for electrical motors and machine housings Range from 0,1 kW up to 300 kW ATEX, IECEx, TR-CU and other international certificates

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 68 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 32 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

K25000-3G high-pressure triplex plunger pump for 24/7 operation, pipeline tensioning and leak testing of tanks and various pipelines. The K25000-3G is used internationally hundreds of times as a high-pressure pump in hydraulic face construction. With a power of 250 kW, a gearbox with forced lubrication and an optional oil cooler, the pump is perfectly suited to the demands of 24/7 mining operations. SPECIAL FEATURES - Capacity data at 100% volumetric efficiency and 20°C ambient temperature - Minimum inlet pressures depending on pumped liquid - Speed range 10-100% depending on rod load - Dynamically balanced gearbox - Forced lubrication gearbox (> 160 kW with oil cooler) - Standard gear ratios i = 3.33 - 3.50 - 4.04 - 4.62 - 5.44 - Can also be operated vertically - Also available to API 674 - Special fluids such as seawater, glycol, methanol, oils, etc. on request

The IDS 100, our second-strongest model of this series of mobile indirect oil heaters, provides powerful mobile heating power Manufactured in Europe, the oil heater fan IDS 100 with a nominal heat input of up to 117.26 kW and an air flow rate of 5,500 m³/h quickly and effectively heats storage and production halls, workshops, building sites and greenhouses. This is ensured by the integrated oil burner with Suntek pump. Of course, your safety is our top priority. Owing to the double-walled housing with protective coating the surface temperature of the outer casing is reduced to a minimum, which means a decreased risk of injuries for the user. Moreover, the housing provides optimum soundproofing. The device is equipped with an electronic flame trap, safety thermostat for overheating protection and fully automatic after-cooling.

Convincing practical advantages: Integrated oil burner with Danfoss® pump Electronic flame safeguard Overheat thermostat Stainless steel combustion chamber Fully automatic aftercooling Double-walled housing for optimal soundproofing and noise insulation Integrated fuel tank Available accessories: External thermostat for fully automatic operation Tank level indicator (available on request) Oil filter filler neck (available on request) More technical data of the IDS 30 D: Heating performance: 38.4 kW Air flow: 605 m³/h Mains voltage: 230 V / 50 Hz Power: 1.25 A Fuel consumption max.: 3.66 l/h Tank capacity: 42 litres Length x width x height: 1.050 x 400 x 520 mm Weight: 25 kg

Hydraulic oil for use in all areas of the food processing technology Compressor oil for screw and multiple vane rotary vacuum pumps at required oil ISO VG 46 Lubrication of other machine elements, such as rolling and friction bearings in the food processing technology Advantages and benefits NSF H1 registered Long operating times through excellent oxidation stability Good low-temperature behaviour Wide operating temperature range Resistant to cold and hot water, water steam, disinfectants and cleaning agents Reduces friction and wear Good corrosion protection Free of mineral oil Conforms to VDL requirements

Transformers with forced oil cooling systems require reliable, glandless transformer oil pumps. We offer a large range of such pumps, from which customers can choose a type that suits their specific requirements and ensures optimum operating conditions. Our oil circulation pumps are of simple, straightforward design and robust construction. Due to their compact size, the pumps can be easily integrated into the oil circuit. Four pump designs are available for different applications: Power Transformer Applications Inline and angle-type pumps with radial impellers and inline pumps with propeller-type impellers. Traction Transformer Applications Pumps with radial impellers for traction transformers in rail-mounted vehicles.

Thousands of nodding donkey oil pumps were energized through an extensive and highly meshed overhead electrical network. Automated protection was performed only by the feeder CB at the substation. None of the line sectioning breakers were automated, so every single failure on the network required human intervention and led to significant outages. Solution Tavrida Electric installed and commissioned six Rec15 with Rezip* functionality on a single line in just one day. The following project outcomes were achieved Direct savings (outage time reduction → revenue loss reduction) Indirect savings (operation, maintenance, and repair cost reduction) Improvement of power supply quality and reliability Drastically improved network visibility and operator awareness *Rezip is an advanced Fault Detection, Isolation and Restoration (FDIR) algorithm

STAUFF Systems Units are characterised by their extremely efficient filter elements which are rated to 0,5 micron. Specially designed for industrial hydraulic installations the STAUFF Offline Filters are available in single or double length configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated motor/pump unit and an Offline Filter, the oil is pumped from the reservoir through the filter unit and after filtering the oil is then returned to the tank. Motor/Pump Units ▪ Different configurations available ▪ Air driven motors Clogging Indicators (available as an option) ▪ Visual clogging indicator Filter Elements ▪ Filter elements of SRM series Pre-Filter Elemets ▪ Spin-On filter elements of SF67 series Construction ▪ Offline filter with integrated motor/pump unit ▪ Offline filter units with up to four filter housings in single or double length configurations Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55...

The STAUFF Offline Filter System “Condition and Monitoring” OLS-CM has been specially developed for the elimination of dirt and water particles in hydraulic and lubrication systems. Subsequent integration into an existing hydraulic system is possible, since the offline filter system operates independently of the system cycle, also during scheduled machine downtimes. The OLS-CM is optionally available with factory-fitted Particle Monitor LPM II and Oil Condition Sensor OCS with Oil Condition Display OCD. Motor/Pump Unit ▪ Available in different configurations Clogging Indicator ▪ Visual clogging indicator Replacement Filter Elements ▪ Filter Elements type SRM Construction ▪ OLS-CM with control box and preparation for installation of LPM II, OCS sensor with OCD display Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55 ... 4.5 US GPM Port Connection ▪ G3/8, G1/2, G3/4 and 18 L Materials ▪ Anodised Aluminium Media Compatibility ▪ Mineral and lubrication oils, other fluids on...

STAUFF RFS Carbon Steel Return Line Filters are designed as tank top or in-line filters. They are mounted directly on the tank top and if 100% of the system oil is filtered, they provide the optimum removal of contaminants from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed with a connection, threaded or flanged, for extending the return oil beneath the surface thus preventing the entrainment of air. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 365 PSI Nominal...

STAUFF RFB Return Line Filters are designed as tank top filters. They are mounted directly on the tank top and if 100% of the system oil is filtered they provide the optimum removal of contaminant from the system. This provides the pump with clean oil thus reducing contaminant generated wear. Because of it’s low weight and compact design, the STAUFF RFB Filters are ideally suited for mobile hydraulic applications. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Air Filter Element (available as an option) ▪ Filter paper micron rating 10 µm, other filter materials and micron ratings on request Filter Bowl with Threaded Connection (available as an option) Filter...

STAUFF Return Line Filters RF are designed as tank top filters. They are mounted directly on the tank top and when 100% of the system's oil is filtered they provide the optimum removal of contamination from the system. This provides the pump with clean oil thus reducing contaminant generated wear. The filter bowl is designed to return the oil beneath the surface thus preventing the entrainment of air by the returning oil. A high efficiency of contaminant removal is assured by using STAUFF RE series Replacement Filter Elements. The high dirt-hold capacity of STAUFF Filter Elements ensures a long service life and, as a result, reduced maintenance costs. Valves (available as an option) ▪ Bypass valve Clogging Indicator ( available as an option ) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection ( available as an option ) Filter Bowl with Threaded Connection ( available as an option ) Filter Elements ▪ Filter elements of RE series Construction ▪ Return...

STAUFF RFA Return Line Filters are a one piece design and can be used as a tank top or an in-line filter. They are mounted in the return line and if 100% of the system oil is filtered, provide the optimum removal of contaminant for the systems. This provides the pump with clean oil, thus reducing contaminant generated wear. A high efficiency of contaminant removal is assured by using STAUFF RE Replacement Filter Elements. The high dirt-hold capacity of STAUFF Elements ensures a long service life and as a result reduced maintenance costs. Valve (available as an option) ▪ Bypass valve Clogging Indicator (available as an option) ▪ Visual clogging indicator or electrical clogging switch Leakage Oil Connection (available as an option) Filter Bowl with Threaded Connection (available as an option) Filter Elements ▪ Filter elements of RE series Construction ▪ Tank top or in-line mounting Operating Pressure ▪ Max. 25 bar / 265 PSI Nominal Flow Rate ▪ Max. 110 l/min / 30 US...

STAUFF Offline Filter Units can be applied to every imaginable industrial application where hydraulic or lubrication systems are present. An integrated motor/pump unit draws fluid out of the tank, filters it and pumps clean oil back into the system. Offline Filter Units can continue to work even when the main system is not in use. Motor/Pump Unit ▪ Available in different configurations ▪ Air driven motors Clogging Indicator (available as an option) ▪ Visual clogging indicator Micro Filtration Elements ▪ Micro filter elements of SRM series Construction ▪ Offline filter with integrated motor/pump unit ▪ Offline filter units with up to four filter housings in single or double length configurations Nominal Flow Rate ▪ 2,1 ... 17 l/min / .55 ... 4.5 US GPM Max. System Volume ▪ Up to 10.800 l / 2.853 gal Port Connection ▪ G3/8, G1/2, G3/4 and 18 L Materials ▪ Anodised Aluminium Media Compatibility ▪ Mineral and lubrication oils, other fluids on request

Specially designed for industrial hydraulic installations, the STAUFF Offline Filters are available in single or multiple housing configurations. The Offline Filter Units can easily be mounted to new and existing hydraulic installations. By means of an integrated motor/pump unit and an Offline Filter, the oil is pumped from the reservoir through the filter unit and after filtering the oil is then returned to the tank. Motor/Pump Unit ▪ Available in different configurations ▪ Air driven motor Clogging Indicator (available as an option) ▪ Visual clogging indicator ▪ With water sensor Filter Elements ▪ Filter elements of SRM series Construction ▪ Offline filters with integrated motor/pump unit ▪ Heated offline filter unit Nominal Flow Rate ▪ Max. 4,2 l/min / 1.2 US GPM Max. System Volume ▪ Up to 2.700 l / 713 gal Water holding capacity ▪ Up to 2.280 ml / 80 oz. Materials ▪ Anodizied Aluminium