Results for
Germany
Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm. Special valve design enables connection of socket and plug under dynamic pressure of up to 8MPa. When connected, the distance between the socket plate and plug plate is designed to be 30mm for all sizes. This means any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line. Autocatalytic NickelPhosphorus coating is adopted for surface treatment over special steel body and internal parts. This coating is environmentfriendly.
Request for a quoteGermany
Connects multiple lines simultaneously with a single operation for different fluids and sizes. Ideal for automated hydraulic or pneumatic cylinder operated systems that need to connect and disconnect several lines simultaneously. Automatic shutoff valves in both sockets and plugs ensure no outflow of fluid on disconnection. Body materials other than stainless steel are available, which can be ordered with or without valves (madetoorder products). Snap ring and screw threadin types to mount on the base plate are standardized. MAS type can accept axial eccentricity between socket and plug. The allowance of eccentricity is within the radius range of 0.3mm. Cupla connection with fluid under dynamic pressure cannot be made.
Request for a quoteGermany
Simultaneously connects several ports securely in one operation. Greatly reduces changeover time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Comes with lock mechanism to prevent accidental disconnection. Large flow equivalent to that of SP Cupla Type A. Two kinds of plates are available for each size. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Selfaligned valve design provides safety sealing of individual socket or plug when disconnected.
Request for a quoteGermany
Simultaneously connects several ports securely in one operation! Greatly cuts cycle time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Comes with lock mechanism to prevent accidental disconnection. Valve on socket side only.
Request for a quoteGermany
- One interface for compressed air, gases, liquids, electrical and electronic signals - Fits to Eisele Adaptive insets - Can be assembled as bulkhead - Material Al nickel-plated or stainless steel - Temperature range -20 to +120 °C - Working pressure range -0,8 to 0 bar or 0 to 24 - Up to max. 14 connections
Request for a quoteGermany
— Material Al natural anodized, brass nickel-plated — Sealing FPM — Plug connectors Series 15 (release ring) — without shut-off — Can be assembled as bulkhead — Temperature range -20 to +120 °C (-4 to 248 °F) — Working pressure range -0.95 to 16 bar (-14 to 232 psi) — for compressed air
Request for a quoteGermany
- One interface for compressed air, gases, fluids, vacuum, electrical and electronic signals - Maximum modularity due to freely configurable connections - Integrated coding in the housings prevents incorrect connections - Easy, tool-free mounting and dismounting - Locking lever reduces the force needed for assembly - Machine set-up times are reduced - Fits to Eisele adaptive inserts - Coupling and slotted nut material: Chemical nickel-plated aluminum - Lever materials: anodized aluminum / 1.4301 (304) stainless steel - Other materials: 1.4404 (316L) stainless steel / A2 / POM - Knurled screw with retaining cable
Request for a quoteGermany
— Plug connectors series 15 — With shut-off — Can be assembled as bulkhead — Sealing FPM — Material Al natural anodized, brass nickel-plated — Temperature range -20 to +120 °C — Working pressure range -0,8 to 16 bar
Request for a quoteGermany
Highly flexible tyre coupling MULTI CROSS RILLO MCR * High torsional flexibility with progressive torsional deflection characteristic * High compensating capability for axial, radial and angular misalignments * Easy and time saving mounting of the coupling hubs thanks to the use of taper bushes * Radial change of the rubber element without axial movement of the coupled machines * Backlash-free torque transmission even in case of alternating directions of rotation * High torsional vibration and shock load damping capability * Noise level insulation * Wear-resistant and maintenance-free
Request for a quoteGermany
MULTI MONT ASTRA - Torsionally flexible claw coupling with or without taper bush * compensate axial-, radial- and angular misalignments * Shock and vibration damping * fail safe and withstand high overloads * Ease of assembly and alignment * maintenance-free
Request for a quoteGermany
* High speeds * Maintenance-free * Shock and vibration damping * Compensation of axial, radial and angular offsets * Easy assembly and alignment thanks to the plug-in type design * Simple radial element replacement by sliding back the retaining cap * Fail-safe operation and high overload capability * High-strength aluminum * Low weight * Adaptable to almost any mounting situation
Request for a quoteGermany
Torsionally flexible claw couplings MULTI MONT SELLA * compensate for axial-, radial- und angular misalignments * absorb shocks and vibrations * are fail-safe and withstand high overloads * are well suited as plug-in type couplings ensuring ease of assembly and alignment * allow prompt and easy radial change of the flexible elements by sliding bakc the retaining cap * are maintenance-free * are customizeable for almost every type of mounting situation * easy and simple assembly of the shaft connections thanks to taper bushes
Request for a quoteGermany
The flexible Reich MULTI MONT ASTRA coupling is a fail-safe claw coupling with flexible element for a torsionally flexible shaft connection. The advantages of the all over machined MULTI MONT ASTRA coupling, and of the claw flanks in particular, are the precise running characteristic and the extended service life. The most salient characteristics and advantages of the MULTI MONT ASTRA claw coupling: compensate axial-, radial- and angular misalignments absorb shocks and vibrations fail safe and withstand high overloads The series covers a range of 10 different sizes with nominal torques from 10 Nm to 2400 Nm well suited as plug-in type couplings ensuring ease of assembly and alignment maintenance-free We are glad to see that you are interested in our product line and are happy to answer all questions! Please use our contact form or call us: +49 234 959160. For additional information regarding designs, sizes or technical details please make use of our download opportunities...
Request for a quoteGermany
MULTI CROSS RILLO couplings are highly torsionally flexible tyre couplings with progressive torsional deflection haracteristic. The salient feature of the MULTI CROSS RILLO shaft couplings is that the coupling hubs are supplied with commercially available taper bushes for nominal torques of up to 11500 Nm. This allows easy and time saving mounting of the coupling hubs on the shaft. Special tools are not required. The most important attributes and advantages of the highly flexible MULTI CROSS RILLO couplings: High torsional flexibility with progressive torsional deflection characteristic High compensating capability for axial, radial and angular misalignments Easy and time saving mounting of the coupling hubs thanks to the use of taper bushes Radial change of the rubber element without axial movement of the coupled machines Backlash-free torque transmission even in case of alternating directions of rotation High torsional vibration and shock load damping capability Noise level...
Request for a quoteGermany
The MULTI MONT OCTA flywheel coupling is designed specifically as a torsionally flexible drive coupling for units with internal combustion engines. It is used to dampen torsional vibrations and to compensate for misalignments. Salient features and advantages of the MULTI MONT OCTA flywheel coupling: Efficient torsional vibration and peak torque dampening and absorbing capability Ease of assembly thanks to the plug-in type design Compensation of axial, radial and angular misalignments Coupling hub of spheroidal cast iron as a standard Fail safe design combined with a high load carrying capability, nevertheless with protection against overload breakage by means of the existing rated break point Simple, compact and thus low-cost coupling design We are glad to see that you are interested in our product line and are happy to answer all questions! Please use our contact form or call us: +49 234 959160. For additional information regarding designs, sizes or technical details please...
Request for a quoteGermany
The MULTI CROSS FORTE is a highly flexible coupling with progressive torsional stiffness. The special characteristic of all MULTI CROSS FORTE couplings is the use of transmission elements, which are alike within the same type series, but their number vary according to the size of the coupling. The most salient characteristics and advantages of the highly flexible MULTI CROSS FORTE coupling: Very high torsional flexibility with a progressive torsional characteristic line High compensation capability of axial, radial and angular misalignment Backlash-free torque transmission even for reverse rotation High torsional vibration and shock load absorbing capability Good removal of heat which may be generated by the damping effect of the coupling Easy alignment of the coupling Positive fit between transmission element and hub flange to prevent relative movement Cost-saving spare parts inventory by use of the same element size within one series type We are glad to see that you are...
Request for a quoteGermany
MULTI MONT couplings have been built in series since 1958. This pluggable claw coupling that has been successfully proven over a number of decades has been permanently updated to the state of the art, and the MULTI MONT SELLA, MULTI MONT DEKA and MULTI MONT GIANT series nowadays cover a torque range from 40 to 1 000 000 Nm. Advantages of MULTI MONT-SELLA, -DEKA, -GIGANT: compensate for axial-, radial- und angular misalignments absorb shocks and vibrations Series spans 22 sizes covering torque ranges from 40 Nm to 1 000 000 Nm are well suited as plug-in type couplings ensuring ease of assembly and alignment allow prompt and easy radial change of the flexible elements are maintenance-free are customizeable for almost every type of mounting situation We are glad to see that you are interested in our product line and are happy to answer all questions! Please use our contact form or call us: +49 234 959160. For additional information regarding designs, sizes or technical details...
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
Germany
Multi-part design with VKR buffers - Claw ring can be pushed back for checking the direction of rotation The TSCHAN ® TNB BHDDV - coupling is a torsionally flexible, puncture proof claw coupling. It compensates for angular, radial and axial shaft misalignments within defined limits. The coupling transmits torque through elastic buffers loaded in shear. These buffers come in Perbunan (Pb) or polyurethane (Vk), as a standard VkR. These elastic buffers dampen shocks and torsional vibrations and are resistant to oil. When the claw ring is pulled back it is easily possible to check the rotational direction of the drive. The coupling is suitable for use in every direction of rotation and installation position. TSCHAN ®-TNB Type BHDDV For short shaft distances, a combination of two multi-part coupling hubs and VkR buffer. Easy replacement of the elastic buffer without axial movement of the coupled machines. General features Torsionally flexible, compensate for angular, radial and axial...
Request for a quoteGermany
Combination one-part/multi-part with VKR buffers - Like BHD, but with brake disk The TSCHAN ® TNB BHD-BS / BT coupling is a torsionally flexible, puncture proof claw coupling. It compensates for angular, radial and axial shaft misalignments within defined limits. The coupling transmits torque through elastic buffers loaded in compression. These buffers come in perbunan (PB) or polyurethane (Vk), as a standard VkR. These elastic buffers dampen shocks and torsional vibrations and are resistant to oil. Buffers made of perbunan are electrically conductive. When the claw ring is removed, it is easily possible to check the rotational direction of the drive. The coupling is suitable for use in every direction of rotation and installation position. TSCHAN ®-TNB Type BHD-BS Combination of a one-part design and a multi-part design coupling hub with brake disk and VkR buffer. Easy replacement of the elastic buffer without axial movement of the coupled machines. General features Torsionally...
Request for a quoteGermany
Combination one-part/multi-part with VKR buffers - Retractable claw ring The TSCHAN ® TNB BHD coupling is a torsionally flexible, puncture proof claw coupling. It compensates for angular, radial and axial shaft misalignments within defined limits. The coupling transmits torque through elastic buffers loaded in compression. These buffers come in perbunan (PB) or polyurethane (Vk), as a standard VkR. These elastic buffers dampen shocks and torsional vibrations and are resistant to oil. Buffers made of perbunan are electrically conductive. One of the coupling halves consists of a flange hub to which a claw ring is bolted. When the claw ring is removed, it is easily possible to check the rotational direction of the drive. The coupling is suitable for use in every direction of rotation and installation position. TSCHAN ®-TNB Type BHD Combination of a one-part design and a multi-part design coupling hub and VkR buffer. Easy replacement of the elastic buffer without axial movement of...
Request for a quoteGermany
Combination one-part/multi-part with VKR buffers - Claw ring can be pushed back for checking the direction of rotation The TSCHAN ® TNB BHDV coupling is a torsionally flexible, puncture proof claw coupling. It compensates for angular, radial and axial shaft misalignments within defined limits. The coupling transmits torque through elastic buffers loaded in compression. These buffers come in perbunan (PB) or polyurethane (Vk), as a standard VkR. These elastic buffers dampen shocks and torsional vibrations and are resistant to oil. Buffers made of perbunan are electrically conductive. One of the coupling halves consists of a flange hub to which a claw ring is bolted. When the claw ring is removed, it is easily possible to check the rotational direction of the drive. The coupling is suitable for use in every direction of rotation and installation position. TSCHAN ®-TNB Type BHDV For short shaft distances, a combination of an one one-part design and a multi-part design coupling hub...
Request for a quoteGermany
A single operation makes simultaneous connections for multiple lines that have a variety of different fluids and sizes. A special design minimizes air admixture in fluid lines upon connection. Compared with conventional Multi Cuplas, approximately double flow rates are realized. This could reduce the size of required plates. (Rate of flow increase depends on Cupla sizes.) The MALC type realizes a 2mm axial eccentricity allowance, while the conventional Multi Cupla is only 0.6mm. Special valve design enables connection of socket and plug under dynamic pressure of up to 2MPa. When connected, the distance between the socket plate and the plug plate is designed to be 30mm for all sizes. This means that any size of Cupla can be mounted and used on the same plate. Airless structure valves prevent outflow of fluid and admixture of air into the fluid line.
Request for a quoteGermany
Simultaneously connects several ports securely in one operation! Greatly reduces changeover time in multiple ports replacement. Handles several ports at once. Simple manual lever action completes easy connection / disconnection. Twostage lever operation prevents Cupla from accidental dropping due to sudden detachment. Comes with lock mechanism to prevent accidental disconnection. Large flow equivalent to that of SP Cupla Type A. Two kinds of plates are available for each size. Automatic shutoff valves in both socket and plug prevent fluid spill out on disconnection. Selfaligned valve design provides safety sealing of individual socket or plug when disconnected.
Request for a quoteResults for
Multi-couplings - Import exportNumber of results
24 ProductsCountries
Company type