Multi construction - Import export

Optigrun Drainage and Storage Board FKD 25 for use on extensive green roofs with single- or multi-layer construction and under path surfaces (can be walked on).On flat roofs up to 5 % roof pitch In a triple-layer structure with filter fleece FIL 105 and extensive multi-layer substrate E Under thin-layer pedestrian pathways in gravel beds without bedding material The large naps can face either downwards or upwards Suitable for non-pitched roofs Suitable for use on inverted roofs With water reservoir

Optigrun Drainage and Storage Board FKD 60BO under intensive roof greening in multi-layer construction and temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16Under intensive roof greening in multi-layer construction filled with Drainage Material Perl 8/16 Under temporarily drivable gravel lawn without gravel base layer filled with Drainage Material Perl 8/16 Unfilled installation under intensive roof greening is possible with a substrate height of up to 400 mm in combination with Optigrün Filter Fleece FIL 300 (it is not possible for vehicles of any kind to drive over the unfilled Optigrün Drainage and Storage Board FKD 60BO) Suitable for non-pitch roofs Rapid draining of excess water Vapour permeable - suitable for inverted roofs Lightweight super structure with high drainage capacity Surrounding edge overlaps Filling without risk of shifting apart Cross and T-joints possible - minimal offcuts

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used. The highly flexible loudspeaker cables from bda connectivity are ideally suited for mobile applications.

AViTEQ Dewatering screens are designed as linear vibrating devises for drainage of sand, plastic granules, kieserite, limestone, etc., even to depart insoluble contaminants from wash water or carrier liquids. Advantages & benefits double, specific screening performance of linear vibration with respect to flat screening easy replacement of screen decks low height Construction The design of the screen, depending on the requirements, in single or multi-deck construction. Possible drives are magnetic vibrators, unbalanced motors, exciters and circular vibrators. Dewatering screens are generally designed with top-mounted drives. Selection The sizing depends on: the material to be drained properties of the bulk material, such as bulk density, grain shape, size, size distinction Key figures The dimensions are determined by the task. Previously executed dimensions: length: up to 5,000 mm width: up to 2,800 mm throughput: up to 200 m³/h drives: magnetic vibrator, unbalanced motor, exci

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

bda connectivity is your partner for speaker cables of the highest quality. We offer solutions for all wishes and applications, from silver-plated inner conductors to specific insulation materials or colours. When connecting amplifier and loudspeaker, the cross-section of the cable should be as large as possible. This ensures on the one hand the low-loss transmission of even high power and on the other hand the damping of the counter-EMK generated in the loudspeaker via the internal resistance of the amplifier. Depending on the requirements, standard cables, twin cables, coaxial highly flexible loudspeaker cables, twinaxial cables and multi-channel constructions are used.

Temperature- and density volume conversation for liquids and gases. The UR06 is used to collect energy and material flows for gaseous, vaporous and liquid media. It can be connected to different types of volume, mass, flow, pressure, temperature and densitymeter. From the measured values ??and the parameters set by accepted rules of technology, the media properties are formed. For further processing of the measured and calculated values ??can be passed through variably configurable standard interfaces. Application • continuous measurements of pipeline liquids (mineral oil / Liquid gas) and gas • fuel consumption measurements of motors with supply and return acquisition including the temperatures • measurement of mineral oils used for accounting purposes • measurement in multi-product operation Characteristics • modular construction • Ethernet integrated • MBus and Modbus • simple operation • substantial data logger function • 24 Bit AD-converter • 2 metering points • short cycle...

The storage of car parts requires both solutions to accommodate bulky goods and the ability to store sensitive goods (such as already painted body parts) without damage. Whether it is packed goods, body parts, tyres or rims - with installation kits from SCHULTE Lagertechnik everything is in perfect hands. — tyre-protecting storage through optimised tyre cross beams or storage on rounded wide span spars — Racks for small, medium and large parts storage — all car racks have the 25 mm grid perforation — Can be combined with the entire connector system — various accessories — special car shelf sets — Construction of multi-storey racking systems possible — individual adaptation to different wheel, tyre and rim sizes — quick assembly by simply plugging in the levels — tyre-protecting storage of the wheels through specially shaped cross beams — optimised height 2,750 mm for the storage of SUV wheels — variably applicable for wheels with 550 - 750 mm Ø

Plug-in shelving is ideal for placing and removing items by hand. Thanks to its plug-in connection, the shelves are quick and easy to assemble and also offer a higher maximum load capacity than shelves with a bolted connection. They can be installed for single and double shelving as well as for multi-storey shelving systems and have a special system perforation that makes changing accessories easy. — Bracing with cross brace — Simple alignment of the shelf through turnbuckles on the cross braces — Ideal for constructing rows of shelving in front of walls and as back-to-back double shelving — Height of shelves can be adjusted in increments of 25 mm — Individual adaptation to spatial conditions and to the stored items with three shelf widths — Suitable for constructing multi-level shelving systems — Faster assembly thanks to simple plug-in system for shelves — Economically priced bracing variations — Possible to increase the bay load through additional side elements

For more than 25 years our name has stood for experience, professional competence and consumer-orientated service. Moreover, our clients hold the opinion that our skills in producing multi-part press tools and fixture constructions are absolutely convincing. These tools are implied for instance within the framework of electronic and automotive industry in favour of processing different materials. Thus, your needs will be developed gradually. By using up-to-date software we produce high standard multi-part press tools for national and international clients. With the professional help of the CAD/CAM-Software (Cimatron) we generate 3D-construcions and solids. For data migration we offer several interfaces: Step – DWG – IGES – DXF – just choose what you need. Immediate interfaces that lead directly from the CAD-workstation to the machine ensure shortest processing times.