Motor vehicles - Import export

Removal of loose oxide and electrode-erosion residues, dust deposits or creepage currents which cause soiling in moving contact areas such as motor-vehicle ignition distributors, relay contacts, resistance or potentiometer slideways, in static contact areas such as motor-vehicle spark plugs, plug-in connections, sliding and screw connections, in or on electrical and electronic equipment or devices of all kinds Advantages and benefits Highly effective due to outstanding cleaning properties Broad range of uses for all maintenance and customer service work in electrical sector Fast evaporation after striking surface

Lubrication of tooth flanks and sliding surfaces of machine elements of all types, for example sliding bearings, slideways, guides, etc. Run-in lubrication of heavily loaded tooth flanks and sliding surfaces Lubrication of jackscrews in the motor vehicle and train technology Cable lubrication Advantages and benefits High effectiveness thanks to graphite share Extremely low friction at highest load Increased operational reliability of moving parts due to run-in-supporting formation of sliding film Minimum consumption due to realisable thin-film lubrication Excellent pressure resistance Waterproof Free of bitumen, solvents, heavy metals and chlorine

INOX® Brake Cleaner is a highly effective cleaning agent for drum and disc brakes, brake linings and pads, clutch linings and pressure plates, as well as all parts in and around the motor vehicle which are contaminated with oil, grease, etc. Due to the high proportion of active ingredients, an intensive and fast-acting cleaning is achieved. No residues remain. It is not corrosive and generally does not attack rubber and plastics. However, due to the variety of plastics on the market, a compatibility test is recommended.

INOX Tar Remover is a very fast-acting cleaner for all tar, grease and oil contamination, as well as similar soiling on motor vehicles. The product can also be used for cleaning tools, equipment, devices and machines in which tar is processed. Due to the fast effect the tar remover is particularly economical in use and, when used properly, rubber and plastic friendly.

This force measurement chain was developed for applications where a low cost solution is more important than achieving high levels of accuracy. The sensors strain gauge technology allows the measurement of static and dynamic forces. The load cell is also designed for applications that provide only little space due to its compact design. These properties, together with the sensors dust protection, make the measuring chain suitable for a wide range of applications, such as Industrial manufacture Manufacture of customized machinery Geological investigations Motor vehicle engineering Commercial agriculture Bridge building The body of the sensor is a flat, cylindrical disk, into which a domed force application knob is integrated. It is important that the force is applied axially to the center of the sensor. The domed form, however, minimizes the effect of a force that is not exactly axial.

For fast determination of thermally-dependent interruptions in electrical circuits or components Avoidance of heat damage when soldering electrical components For heat protection of neighbouring components Shrinking of inner parts for removal of seized taper plugs, pins, plugs or bearing bushes Generation of shrink seats for assembly of inner parts For rapid temperature adjustment during materials testing For simulation of cold-starting conditions with motor-vehicle automatic starting systems Advantages and benefits Highly effective due to outstanding undercooling effect Excellently suited for simple cooling of parts Immediate cooling of smaller surfaces or parts down to –45°C depending on spraying duration Evaporates very quickly without residues Also provides good cleaning effect No negative affects on plastics and insulating materials

Smell Away is a odour neutraliser that is especially suited to vehicle interiors, where the single-use aerosol can releases its contents automatically after activation. The interior becomes foggy as Smell Away diffuses to every corner of the vehicle. No ozone device necessary Odour remover diffuses completely A high concentration of active ingredients A good value single-use aerosol can Very fast-working Can be used in more than one vehicle simultaneously No poisonous gases No residue left in the vehicle Fields of application All types of motor vehicle and interior spaces. Usage Always shake well before use! Close all the windows and place the can upright in the passenger seat footwell, not under the dashboard! Press the spray nozzle until it locks down, then immediately close all the doors from the outside. Wait at least 30 minutes, then open all the doors and leave the vehicle to aerate thoroughly for a further 10 minutes. Batch quantity/Packaging units Batch quantity: 75ml...

Inductive displacement sensors of this series measure linear displacements and indirectly all mechanical values convertible into displacements by additional equipment (i.e. tension and compression forces, extension, torque, vibration). The sensor body equipped with a connector has an outer diameter of only 8 mm and therefore is especially well suitable for the integration in dimensionally restricted structures. Typical application fields are displacement and extension measurements on: —Machines —Servo systems —Motor vehicles —Test benches —Production plants The cylindrical case made of stainless steel, houses a differential transformer (LVDT). It consists of a primary and two secondary coils with axially moveable core. A displacement of this core changes the magnetic induction of the coils. The INLINE carrier frequency amplifier converts the displacement into a direct proportional electrical DC voltage.

Optisys Petrol and Optisis Diesel are an efficient cleaner and dispersant in one, which reduce and dissolve deposits in injection nozzles. The products support the maximal efficiency of the combustion chamber and reduce exhaust emissions. In addition, they promote engine cleanliness, offer the best protection against wear and give an all-round smooth performance. Optisys Diesel also gets rid of knocking noises. Field of application Every sort of motor vehicle Usage Optisys Petrol and Optisys Diesel are self-mixing. Pour the entire contents into the empty tank, then refuel. Then drive as normal, refilling only when necessary. Batch quantity/Packaging units Batch quantity: 300ml plastic bottles with screw cap Packaging units: 24 bottles per box

Concentrated cleaning power for manual cleaning of motor vehicles. Works quickly and thoroughly against typical road dirt. For cleaning all painted surfaces, metal etc. Other sizes available on request

Our team has many years of experience working with diverse tasks and in diverse industries: For example, product development, product management, international engineering, sample and small-series production, business development, as well as sales and marketing. Our clients can profit from this experience and the tools and methods developed in this context. Our approach is always pragmatic and results-oriented Technical consulting for filtration (utility vehicles, diesel motors, and industry) Screening of product range for suitability for 3D printing Allocation of tasks for product management

For motor vehicles starter battery (lead acid/AGM/Gel/VRLA) Use as battery charger, power supply and motor vehicles energy supply in buffer mode 100% qualified for motor vehicles on-board electronic system / airbag Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Sealed housing Housing version "B": Advantageous for industrial production lines Housing option "M": Variant for mobile workshop applications Status indication via display and high-power LEDs Menu navigation: German, English, Spanish, Italian, French Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable Option: Customized charging parameters Option: Operation with low temperature until -40°C Option: Regeneration charging for deep dis

For motor vehicles starter battery (Lead acid / Gel / AGM / VRLA) No inrush current – optimized for use within industrial manufacturing lines 100% qualified for motor vehicles on-board electronic system / airbag Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash) Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Sealed housing, protected against internal pollution Status indication via display and high power LEDs Menu navigation: English, French, German, Italian, Spanish Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), charging cable etc. Option: Customized charging parameters Option: Operation with low temperature until -40°C Option: Regeneratio

For motor vehicles starter battery (lead acid/Gel/AGM/VRLA batteries 100% qualified for motor vehicles on-board electronic system / airbag Comfortable menu navigation / Charging parameter configurable Use as battery charger, power supply and motor vehicles energy supply in buffer mode Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Built-in communication interface Sealed housing Housing version "B": Advantageous for industrial production lines Status indication via display and high power LEDs Menue navigation: German, English, Spanish, Italian, French Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable Option: Customized charging parameters Option: Battery diagnostic system Option: Operation with low temperature until -40°C Option: Regeneration charging for deep discharged batteries

For motor vehicles starter battery (Lead acid / Gel / AGM / VRLA) No inrush current – optimized for use within industrial manufacturing lines 100% qualified for motor vehicles on-board electronic system / airbag Use as battery charger, power supply and motor vehicles energy supply in buffer mode (support during diagnosis / flash) Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Built-in communication interface Sealed housing, protected against internal pollution Status indication via display and high power LEDs Menu navigation: English, French, German, Italian, Spanish Wide range of accessories e.g. external visualization of operating state (DBL-SIG-LR remote indicator), charging cable etc. Option: Customized charging parameters Option: Operation with low temperature until -40°C Option: Regeneratio

Intelligent charger for motor vehicles starter battery (Lead acid/AGM/Gel/VRLA) 100% qualified for motor vehicles on-board electronic system/ airbag Use as battery charger, power supply and motor vehicles energy supply in buffer mode Extensive protection functions and self-protection functions Short circuit and reverse polarity protection Protection against defective batteries Built-in communication interface Reliable sparking suppression Comfortable menu navigation / charging parameter configurable Sealed housing Housing version "B": Advantageous for industrial production lines Housing option "M": Variant for mobile workshop applications Status indication via display and high power LEDs Menu navigation: German, English, Spanish, Italian, French Wide range of accessories, e.g. ext. visualization of operating state (DBL-SIG-LR remote indicator), mains and charging cable Electrical safety – certifications: EN60335, EN60950, UL60950-1, EN61046, CSA C22.2 No.60950-1-07 Utilized and appro

-sturdy construction -clear line of vision for the driver -standard galvanized gripping head -rubber guard(s) to prevent damage to drum(s) -gripping mechanism screwed to frame -incredible gripping strength -can be secured to prevent slipping Types available -Type RS/M for 200 litre steel bunghole drums, steel drums with a lid, rolling hoop drums and 220 litre plastic L-ring drums -Type RS/91 for 200 litre steel bunghole drums, steel drums with a lid, 220 litre plastic L-ring drums and plastic double L-ring drums, with wide drum rim edge

-sturdy frame made of steel tubing -loading surface 30 mm softwood timber -rotating assembly with fork sleeves and feature to prevent slipping -2 supporting feet -2 heavy duty wheels Ø 300 x 100 mm Individual construction on request e.g. superstructures such as additional plug-in level, stakes, side walls, shelving, retention basins

The automatic one with a rolling mechanism -3 automatic release points mean the content can be emptied at 3 different positions over the container -automatic locking feature to prevent the container from slipping forward -safety feature to prevent unintentional emptying -ideally situated loading centre of gravity -body with all-round reinforced edging -sturdy frame with fork sleeves Accessories -galvanized lid, can be opened from both sides -welding, oil and watertight

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

This planetary gear reducer with integral gear ratio is fitted for the installation of a Danfoss hydraulic motor. It can be used for a variety of possible applications in vehicle technologies. Motor connection suitable for: Danfoss OMP / OMR, and the subsequent models OMP X / OMR X.

We offer paint protection hoods tailored for the respective car type as well as a standard program with fixed dimensions for the painting of raw bodies and finished vehicles in the motor vehicle industry and in paint workshops and re-varnishing sectors. All our paint protection hoods are characterised by the same high quality features: The temperature resistance ranges between 70 °C and 160 °C depending on the drying conditions of the paint and the product range.

We offer paint protection hoods tailored for the respective car type as well as a standard program with fixed dimensions for the painting of raw bodies and finished vehicles in the motor vehicle industry and in paint workshops and re-varnishing sectors. All our paint protection hoods are characterised by the same high quality features: The temperature resistance ranges between 70 °C and 160 °C depending on the drying conditions of the paint and the product range.

Flexible foams are elastic PU foams that are used in many different applications thanks to their usually excellent padding properties. In addition to the seating furniture industry, applications include motor vehicle and rail vehicle seats. However, they can also be used in seals and loaded damping components. Typical properties Moulded part density of 40–250 kg/m³ Adjustable compression load deflection Dimensional stability under heat up to 100°C Water is usually used as the foaming agent, but liquid CO2 is also possible Special formulations and versions Viscoelastic Barium sulphate loaded for acoustic applications, e.g. in aviation FIPFG seals for PU high-pressure processing Dimensional stability under heat up to 150°C in special applications Emission-free pursuant to RAL-ZU 38 Flame protection formulations Automotive: FMVSS 302 Rail vehicle construction: DIN 5510 (S3, SR2, ST2), EU TL 45545 Aircraft construction: ABD 0031, FAR 25.853 Furniture industry: California 117 Section A Part 1