Motor oils - Import export

INOX HLP 10 INOX HLP 15 INOX HLP 22 INOX HLP 32 INOX HLP 46 INOX HLP 68 INOX HLP 100

The Motor MD1xL is suitable for viscous, highly flammable, combustible liquids up to 100,000mPas. With the oil-free, 1000 Watt powerful Compressed air motor you can achieve the same flow rate as comparable products with 20% less connection pressure and 4% less air consumption. . Optionally with comfort handle . Explosion-proof Motor according to ATEX guidelines . Oil-free usable Features & Advantages . High performance and high efficiency due to optimised flow guidance . Very good handling due to low weight . Long service life . Very good starting behaviour . High energy efficiency

Description: The Pump Set is suitable for thin-bodied, flammable and highly inflammable hydrocarbons. Perfectly suited for the withdrawal or decanting of solvents. • Media examples: Ethanol, petrol, butanol, isopropanol, kerosene, methanol and petroleum.etc. • Pump tube equipped with Lutz original hand wheel • Suitable for filling or transferring alternative fuels, oils, flammable liquids Features & Advantages • Optionally with electric or compressed air drive • No lubricants and therefore no contamination of the pumped medium by lubricants • Highly resistant noble carbon shaft bearing • Maintenance without special tools • Seal modules of the seal-less (DL) pump are interchangeable • Approved according to ATEX directive 2014/34/EU, category 1/2

INOX SAE 10 W 40 INOX SAE 15 W 40 INOX SAE 5 W 50 INOX SAE 20 W 50 INOX Mixed Oil mineral INOX Mixed Oils Semi Synthetic INOX Mixed Oil Full Sysnthetic

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor * optimized drum emptying * infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The Pump Set is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the extraction or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The new B3 Battery is a battery motor for demanding and efficient pump applications. The current-independent application range enables the greatest possible flexibility with the world's highest volume flow of a battery pump (up to 180 l/m). Perfectly suited for the extraction or transfer of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * wear-free, particularly low-noise BLDC motor *optimized drum emptying * Optimized Drum emptying *infinitely variable * extremely high performance with low weight * Maintenance without special tools * Sealing modules of the sealless (DL) pump can be replaced * long service life

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable The value of the maximum flow rate is determined on the basis of fixed parameters and always under the same conditions. These can be found on our website.

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit. Water-based liquids like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Since they contain no mechanical moving parts, their function will not be influenced by dirt particles or other influences. No electrical current is sent through the medium via an electrode with BEDIA sensors, an electrolysis of the medium is not possible. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that occurs when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator. This signal is processed by a microcontroller-based evaluation circuit which activates or deactivates an output stage.

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors react when a filling level is exceeded or falls below a limit. Aqueous mediums like coolants, AdBlue®, fresh water, waste water, bilge water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Since they contain no mechanical moving parts, their function will not be influenced by dirt particles or other influences. No electrical current is sent through the medium via an electrode with BEDIA sensors, an electrolysis of the medium is not possible. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that arises when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator, causing it to oscillate. Then this signal is processed by a microprocessor-based evaluation circuit.

BEDIA level monitoring sensors are used to monitor the filling levels of liquids. The sensors detect when a filling level is exceeded or falls below a limit. Water-based liquids like coolants, AdBlue®, fresh water, waste water and oil-based liquids like motor oils, hydraulic oils, fuels and brake fluids can be monitored. Operating Principle The function of the sensor is based on the capacitive principle. It detects the change in capacitance that occurs when an electrode surrounded by air is immersed into a liquid medium. This change in capacitance at the electrode of the sensor excites an oscillator. This signal is processed by a microcontroller-based evaluation circuit which activates or deactivates an output stage. Types of Media The level monitoring sensors are designed for two different media types: For electrically conductive liquid media with relative permittivity within a range of εr 35 … 85 (water, coolant, water/glycol mixture) For electrically non-conductive liquid media

The flow meter with display convinces with its simple, demand-oriented display, operability and compact design. Thanks to the rotating Oval gear meter and a magnet integrated in the measuring chamber, it enables the exact measurement of the volume flow and measures mineral oils and alternative fuels such as diesel, petrol etc. precisely, quickly and above all efficiently. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Quantity preselection can be retrofitted with a relay module at any time * Suitable for measuring alternative fuels Features & Advantages * Measurement according to the oval wheel principle * High measuring accuracy * Low pressure losses in the system * Measuring range from 3 l/min - 80 l/min * Low frictional resistance

The Drum pump is suitable for thin-bodied, aggressive and non-flammable media. Perfectly suited for the withdrawal or decanting of mineral oils. * Media examples: Diesel, heating oil, hydraulic oil, machine oil and motor oil etc. * Pump tube equipped with Lutz original hand wheel * Suitable for filling or decanting alternative fuels Features & Advantages * Optionally with electric or compressed air drive * No lubricants and therefore no contamination of the pumped medium by lubricants * Optimized Drum emptying * Universally resistant ETFE shaft bearing * Maintenance without special tools * Seal modules of the seal-less (DL) pump are interchangeable * The maximum flow rate is a value determined by means of a test bench and measured with water at a liquid temperature of approx. 20 °C . The measurement is taken at the pressure joint of the pump, without hose, nozzle or flow meter.‌

The lubricant-free drive of this grinding spindle based on a vane motor is unique and patented. Its great advantage: It provides the high performance of a vane motor and can still work completely lubrication-free. This model includes the BIAX hose unit with silencer.

This spindle is ideal for fine grinding, milling and engraving surfaces that must not be oil lubricated. The centrifugal governor ensures constant speed and reduces air consumption.

This high-speed spindle is particularly suitable for the use with the finest milling and grinding tools. The elastic front bearing enables the production of surfaces of the highest quality. A further application is the drilling of rubber.

ERC NANO 10-9 motor oil additive forms an ultra-thin functional layer in the engine interior and thereby reduces friction, wear and sediments. It improves the oil supply for improved engine performance and lower fuel consumption. THE EFFECT Even apparently smooth metal surfaces turn out to be rough when viewed under the microscope. Friction leads to wear and higher fuel consumption. ERC NANO 10-9 Motor Oil Additive „hardens“ the metal surface by chemical means, forming a smooth protective layer on surfaces subject to high frictional stress by building up chemically active nano structures (“bottom-up”). This leads to optimum engine power and lower fuel consumption. THE ADVANTAGES AT A GLANCE - Highly effective reduction of friction and wear through chemically active NANO structures - Cleans engine and oil ducts free of deposits - Reduces noise and stabilizes oil pressure - Improves stability under load of the basic oil - Protects against oil ageing and corrosion

ERC hydraulic tappet additive attenuates disturbing noises which can arise from dirty and gummed-up hydraulic tappets. The Effect Disturbing engine noises can arise from dirty and gummed-up hydraulic tappets. ERC hydraulic tappet additive attenuates the noise, cleans valve bores and improves the lubricating properties of the motor oil. ERC hydraulic tappet additive can be used with all motor oils for petrol and diesel engines. It is also suitable for catalytic converters and turbochargers. After adding it to the motor oil, the engine only has to be warmed up. Re-fill after each oil change. The benefits at a glance ERC hydraulic tappet additive: Attenuates noise created by dirty and gummed-up hydraulic tappets Cleans valve bores Improves the lubricating properties of the oil ERC hydraulic tappet additive can be added to the motor oil at any time. One bottle is sufficient for 4 litres of motor oil.

Impact-resistant, sealed plastic housing, resistant to splash water, fuels, motor oils and antifreeze - Actuation via angled metal lever - Return spring fitted - Resistance element made of conductive plastic - Multiple contact grinder made of precious metal - Resistance for current limitation fitted in the grinder circuit - Fastening via two side round holes - Electrical connections via side cable outlet with AMP plug.

Hydraulic presses are suitable for the high-precision forming of various parts, whereby the maximum press capacity is available in every position of the slide. In combination with their flexibility in terms of slide speed and dwell time, they are also particularly suitable for press hardening applications. Overview: ● Press capacity: 1,500 - 25,000 kN ● Part size: small, medium, large ● Application: for the production of drawn parts or as part of a press hardening line Description and benefits: ● Slide movement either pressure and / or travel-dependent ● Specially designed hydraulic system without shift shock during operation ● Motorized oil circulation with cooling or heating unit The models for press hardening are available in 8,000, 12,000 or 16,000 kN and come with a newly developed combination of servomotor and hydraulics that allows higher speeds in the closing and return movement of the slide.