Results for
KÄHLIG ANTRIEBSTECHNIK GMBH
Germany
Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides electronics
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
Features — 4-pole rotor with plastic-bonded magnets NeFeB — Threefold winding connected in delta — Internal Hall sensors for rotor position detection offest by 120° — Ball bearings — Multiple combination possibilities with gears, encoders, brakes — Power output in rated operation: 15,1 Watt — Multiple combination possibilities with gears, encoders, brakes and integrated electronics
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides
Request for a quoteKÄHLIG ANTRIEBSTECHNIK GMBH
Germany
Features – 4-pole rotor with resin bonded NeFeB-magnets – 3-phase winding in delta-connexion – 3 inside hall sensors for rotor position detection – Housing made in aluminium – End shields in precision machined aluminium parts – Ballbearings on both sides electronics
Request for a quoteFLUX-GERÄTE GMBH
Germany
For driving the FLUX pump a wide range of electrical to pneumatic motors is available. Even if you work in hazardous areas or with flammable liquids. Depending on the application, different pumps can be driven by different motors. Thus, the output of a drum pump depends, among other things, on the power of the motor. Here you will find the most economical and safest drive solution for your application. Battery motor: FBM-B 3100 Commutator motors: FEM 3070 FEM 4070 F 457 F 458 F 460 Ex Compressed-air motors: F 416 Ex FPM
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit to pump petroleum products out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube material aluminium, optionally with commutator motor FEM 4070 (500 Watt) or commutator motor F 457 (800 Watt) available; furthermore are enclosed: hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart into two parts without tools Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit for 99,98 % drum emptying. Due to integrated backflow stop less than 0.05 l residual amount in 200 l drum possible. For pumping thin media out of 200 l drums (immersion length 1000 mm) or IBCs (mmersion length 1200 mm). Comprising drum pump F 425 with mechanical seal, outer tube in stainless steel, commutator motor F 460, hose, hand nozzle and compression gland. Can also be used in hazardous areas. Product attributes: - Pump with mechanical seal - Switch lever to close the backflow valve / foot valve - Pulsation-free transfer - Transfer against closed valve (e.g. hand nozzle) possible - Radial shaft sealing ring prevents intrusion of vapours and liquids into the coupling area Benefits: - Less than 0.05 l residual amount left in 200 l drum - Universally and flexibly applicable - Reduction of cleaning and waste disposal costs - Optimal use of fluids - No loss of medium when taking the pump from drum to drum
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit to pump cleaning agens and disinfectants out of 60 l hobbocks. Comprising drum pump F 424, outer tube in polypropylene with commutator motor FEM 4070. Fume gland to protect operator and environment of dangerous vapours. Furthermore, hose and hand nozzle are included. Product attributes: - With fume gland - Immersion length 800 mm - No seal in the liquid area - No contamination of the medium by lubricants - Free from wear - Relief openings provide the same fluid level inside the pump compared to the - drum content Benefits: - No risk of vapours escaping - Immersion length adjusted on 60 l hobbocks - Optimum centre of gravity - the container does not fall - Non-sensitive to dry-running - No seal wear - No bearing wear - No contamination of the medium by abrasion of sealans - No contamination of the medium by lubricants - Low maintenance - Built to last
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled progressive cavity pump kit with progressive cavity pump F 570 and planetary gear for industrial applications to pump thin to medium viscous media up to 30.000 mPas out of 200-l drums and IBCs. The positive displacement pump works smoothly at a constant pressure and ensures a gentle, pulsation-free pumping. Comprising Progressive cavity pump VISCOPOWER F 570 in 1000 or 1200 mm, Commutator motor F 457, Stator housing, Stator, Hose, Discharge spout, Hose connection and compression gland.
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit for food and pharma. The pump-kit is ideal for hygienic applications and suitable for conveying media out of drums, IBCs and other containers. It can be easily and quickly disassembled for cleaning / sterilization and can be completely stripped down to individual parts. Comprising drum pump FP 427 FOOD, outer tube stainless steel 1000 or 1200 mm, commutator motor F 458, hose, hand nozzle, hose connection and compression gland. Product attributes: - Sealless in the liquid area - Minimal dead spots - Can be taken apart completely in only a few steps - Disassembly almost without tools possible Benefits: - Ideal as hygienic pump - Can be quickly and easily taken apart for cleaning - All parts in contact with the medium can be sterilized - Transfers also fluids containing solids such as juices with pulp or soups with spices - Appropriate for food contact acc. to EC 1935/2004 and FDA CFR 21 - Also available for the ex-area with drum pump FP 430 Ex FOOD
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled progressive cavity pump kit with progressive cavity pump VISCOPOWER F 570 and planetary gear for food and pharma to pump thin to medium viscous media up to 25.000 mPas out of 200-l drums and IBCs. The pump is especially designed to meet the specific requirements of the food, cosmetic and pharmaceutical industries and works with little turbulences, at constant pressure and ensures a smooth, pulsation-free pumping. Comprising Eccentric worm-drive pump F 570 in 1000 or 1200 mm, Commutator motor F 458-1, Stator housing, Stator, Hose, Discharge spout, Hose connection and compression gland.
Request for a quoteFLUX-GERÄTE GMBH
Germany
The pump-kit MINIFLUX is designed for emptying IBCs via their floor-level outlet. Designed as an alternative to a vertical pump, the MINIFLUX can be used when an IBC is not accessible from the top. It is suitable for applications when gravity draining via the outlet tap is insufficient e.g. rapid dispensing or transfer to another container in a higher location. Power can ideally be provided by a commutator or compressed air motor. Product attributes: - For pumping out of IBCs directly from the outlet (with standard S60 x 6 thread) - Simple connection of the pump to the outlet by union nut - Compact design - Can be dismantled into two parts via clamp - Low overall weight of 1.2 kg - No need to mount pump to top of container - Does not require access to the container from above - Ideally combined with commutator motor or compressed-air motor Benefits: - Can be used where ceilings are low - Allows pumping directly from floor-level outlets, even when containers are stacked
Request for a quoteFLUX-GERÄTE GMBH
Germany
The small drum pump JUNIORFLUX with fixed motor FEM 3070 is especially suitable for pumping comparably small quantities out of containers such as canisters or drums of up to 200 litres. The small outer tube diameter allows pumping even out of narrow openings. The pump kit consists of pump with motor, 2 m hose and hand nozzle. Product attributes: - Sealless in the liquid area - With mains connection - Powerful commutator motor with brushes - Ergonomic design handle - Low weight - Small outer tube diameter - Holding hook for hand nozzle at pump discharge - With integrated holder for the pump Benefits: - Also suitable for transferring smaller quantities - Can pump out of narrow-necked containers - Minimal force required to change drums - With mains connection - enables very long operating times - High operational safety due to overload cut-out switch - Easy single-hand operation - Hand nozzle always quickly at hand due to holding hook - Low storage space required
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit to pump different media out of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430, outer tube in stainless steel, hose, hand nozzle and compression gland. Driven either by commutator motor F 460 or compressed-air motor F 416. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools into two parts Benefits: - Easy disassembly - Universally and flexibly applicable - Easy to clean as no medium can get into the inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit to pump high flammable media out of 200 l drums or IBCs. Comprising drum pump F 424, outer tube in stainless steel, hose, hand nozzle and compression gland. As drive either the commutator motor F 460 or compressed-air motor F 416 are available. Product attributes: - No seal in the liquid area - Ex protected - Free from wear - Relief openings provide the same fluid level inside the pump compared to the drum content Benefits: - Non-sensitive to dry-running - No seal wear - No bearing wear - No contamination of the medium from lubricants or wear of seal materials possible - Medium cannot be contaminated by lubricants - Low wear and maintenance - Built to last - For use in hazardous area - Motor also available with speed control
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
FLUX-GERÄTE GMBH
Germany
Pre-assembled pump set for pumping concentrated acids from 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, outer tube in polyvinylidene fluoride and commutator motor F 458, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be fast and without tools disassembled into two parts - Steel core in the inner tube prevents longitudinal changes at high and low temperatures - Robust motor with aluminium housing and special corrosion-resistant painting - Motor is completely closed Benefits: - No medium gets into the inner tube of the pump - No carrying-over of the medium - one pump can be used for different media - Pump can be quickly and easily cleaned - No corrosion on motor due to aggressive vapours
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit to pump alkalis of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising sealless drum pump F 424 with outer tube in polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland. Product attributes: - Non-sensitive to dry-running - No seal wear - No bearing wear - Low maintenance - Built to last Benefits: - No seal in the liquid area - No contamination of the medium from lubricants or wear of seal materials possible - Free from wear - Relief openings provide the same fluid level inside the pump compared to the drum content
Request for a quoteFLUX-GERÄTE GMBH
Germany
Pre-assembled pump kit to pump acids of 200 l drums (immersion length 1000 mm) or IBCs (immersion length 1200 mm). Comprising drum pump F 430 with mechanical seal, material outer tube polypropylene, commutator motor FEM 4070, hose, hand nozzle and compression gland. Product attributes: - Pump with mechanical seal - Pump can be taken apart without tools - Inner tube with steel core - prevents longitudinal changes at high or low temperatures Benefits: - Easy disassembly - Universally and flexibly applicaple - Easy to clean as no medium can get into to inner tube - No carrying-over of the medium - one pump can be used for different media - Also for adhesive media - Also for liquids that crystallize or harden
Request for a quoteMEGATRON ELEKTRONIK GMBH & CO. KG
Germany
HTx36 encoder - robust, ball bearing, sealed, with solid or hollow shaft. The encoders of the HTx36 series are specially designed for use between simple applications and heavy-duty applications. The contactless encoders in the Ø36 mm metal housing can be precisely matched to the respective area of application thanks to their numerous electronic and mechanical options. Absolute encoder: — Single- or multiturn — Analogue: Voltage/current output, PWM - 12 bit — Digital: SSI, SSI+UVW up to 16 pole pairs, SER, SPI - up to 14 bit — Also redundant Incremental encoder: — A, B, Z also differential A, A/, B, B/, Z, Z/ — OC, TTL, PP signal outputs — Free selection of the number of pulses - up to 1024 ppr. — UVW signals for motor commutation of DC motors up to 16 pole pairs
Request for a quoteMEGATRON ELEKTRONIK GMBH & CO. KG
Germany
The ETx25 singleturn Hall effect encoder family is characterized by its high durability with over 100 million shaft revolutions and independent linearity up to +/- 0.3%. The rotary encoders measure angles contactless with a hardened and tempered sleeve bearing made of metal. The sensor technology offers a 10 times longer lifetime expectancy than conventional potentiometers. The sensor in the Ø25 mm housing with Ø6 mm or 6.35 mm (1/4 ") shaft diameter is fixed in the application by means of a central thread. It can be chosen between following electronics: Absolute encoder: — Single- or multiturn — Analogue: Voltage/current output, PWM - 12 bit — Digital: SSI, SSI+UVW up to 16 pole pairs, SER, SPI - up to 14 bit — Also redundant Incremental encoder: — A, B, Z also differential A, A/, B, B/, Z, Z/ — OC, TTL, PP signal outputs — Free selection of the number of pulses - up to 1024 ppr. — UVW signals for motor commutation of DC motors up to 16 pole pairs
Request for a quoteROS ROLLENTECHNIK GMBH
Germany
The Senergy® motor-driven roller is a genuine innovation. It is the first roller with a brushless 24V motor to be fitted with a standard four-pin M8 connector. A patent is now pending on this new technology. It is the digital encoding of the hall-effect signals in the motor that enables signal transmission to the external commutation electronics. The motor temperature is encoded and analysed in a similar way. This reliably protects the motor from overheating by effecting downward regulation as soon as a critical temperature is measured. Moreover the serial number and production date are stored on the µ controller. — Max. bearing capacity 50 kg — 24V motor — Electronic brake function — IP54 — IP66 optional Specifications: — cylindric — galvanized steel or stainless steel — lenghts from 300 to 1000 mm — control system (Convey linx) with boost mode — adjustable electronic brake function — up to 50 kg/roller
Request for a quoteResults for
Motor commutators - Import exportNumber of results
24 ProductsCountries
Company type