Miniatures - Import export

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Can be used for 4-wire RTD‘s. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Plug connector for thermocouple and RTD circuits. The solid connector pins guarantee reliable connection under even the most difficult conditions. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Solid connector pins and spring-loaded socket. • Reverse polarity protection by different pin thicknesses. • Central cover attachment for fast installation. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection.

Use: Link bending protection for miniature connectors. Application: Bending protection for thermocouples and wire being used with miniature connectors. Prevents mechanical damage of wires at entrance point of the connector. Construction: • Silicone rubber insert, tapered entrance hole ensures proper sealing on cable.

Use: Two identical silicon sleeves enclose the connectors and wires. This provides good protection against spray water and dirt. Installation: • Simply slip the sleeves backwards over the connectiors, overlapping them by approx. 3 – 4 mm. • Also prevents possible detachment of the connectiors under high vibration.

Application: Wire clamp bracket will provide optimum strain relief. Construction allows a large difference in maximum and minimum wire diameter. Construction: • Silicone cover with retention ring prevent disconnection due to vibration. Tapered entrance hole to ensure proper sealing on most cable diameters.

Application: A set wire inserts fitted in the entrance hole of the connector will provide a very good strain relief without any protruding parts from the connector. Construction: • Thermoplastic material with a round or oval hole fit around a specific wire.

Use: Designed for soldering or crimping on mineral insulated sheath cable or crimping on insulated wire. Construction: Brass machined, nickel plated insert with 0.1 mm tolerance on the cable OD.

Use: Grommet can be fitted in the entrance hole of the connector to prevent moisture and dirt from entering the connector. Has limited strain relief capabilities. Construction: • Silicone ring, slit for easy mounting over wire. Will compress on the wire when the cover is fitted.

Application: Miniature connectors donot have a retention groove. In order to prevent accidental disconnection a locking plate can be used. Construction: • Glass filled thermoplastic with the same temperature rating as the connector body (200 °C) Red colour indicated clearly that the circuits are protected. Can be placed and removed without any tools.

Use: Installation clamp for ceramic jack, high-temperature Jack or miniature jack for panel installation. . Mechanical design: • All parts, including the screws, are made of stainless steel. Order no.: • A-20.210 Clamp for ceramic jack. • A-20.307 Clamp for high-temperature jack.

Use: Panel insert for thermocouple and RTD circuits. Mounting by means of stainless steel bracket and two screws or with a stainless steel clip-spring. Ideal panelinsert for instrument cases. Mechanical design: Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Easy wire connection through sandwich construction. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP-XX and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection.

Use: Built-in couplings for assembly with panel kits into complete miniature panels. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with miniature connector plug CMP- and miniature jack CMJ-XX. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Conductor guides for prevention of short-circuits. • Screw terminals enable quick connection. • Polarity designation next to the connection screws.

"Use:Connector panels for thermocouple and resistance thermometer measurement circuits for installation in control rooms, operating panels, laboratory areas, switch panels, push-in housings, etc. Advantage: Self-locking connector. The locking device prevents accidental faulty connections and unintentional disconnection during the measurement process. Compatible with Connector Mininiature CMP-XX. Mechanical design: • Aluminium front plate, anodised, protected against corrosion. • Measurement circuit numbering, abrasion- and wipe-proof. • Attachments of stainless steel and nickel-plated brass. • Montageart und Konstruktion verhindern ein Hinein- oder Herausdrücken der montierten Einbau-Kupplungen. • The bevelled connection levels enable easy connection and disconnection of the conductors in the installed condition. • Individual built-in couplings can be replaced by loosening only a few screws.

Use: Panel insert for thermocouple and RTD circuits. Specially designed to be used together with Hamitherm miniature panel set. Mechanical design: • Thermoset body with original thermocouple material pins and • springloaded inserts. • Polarized pins. • Molded barriers prevent short circuit. • Rugged one body design. • Moulded barriers prevent short-circuits. • Polarity indication next to connection screws.

Due to their small dimensions and sturdy construction, these miniature compression load cells made of stainless steel can be used in a wide range of industrial applications and in laboratories. This compression load cell is easy to handle and its installation is uncomplicated. Its small size makes it perfect for use in very restricted structures for both static and dynamic compression force measurements. The miniature compression load cell model 8415 is a flat cylindrical disc, the bottom of which is closed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. A strain gage full bridge is applied in the gauging member of the measuring element. This produces bridge output voltage directly proportional to the measured force. The small diameter of the sensors results in high rigidity and a short measurement range. The measuring force has to be applied centrically and free from lateral forces.

Due to their extremely compact design, these load cells can be used wherever static or dynamic load forces have to be measured in very tight spaces. Model 8416 is perfect for use in micro-technology and just as suitable for measuring tasks in the research and development sector. The ultra-miniature compression load cell model 8416 is a flat, circular disc, the bottom of which is sealed with a cover. The load application button for receiving the compression forces is an integrated part of the sensor. The sensor element inside the body carries a strain gage full bridge which outputs voltage directly proportional to the measurement variable upon application of force. The short nominal measurement distance of the ultra-miniature compression load cells due to their design provides a high degree of rigidity. If needed, the nominal characteristic value can be standardized in the sensor connection cable.

Use: Connectors for thermocouples and resistance thermometer measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials and spring-loaded sockets for reliable contact. • Reverse polarity protection by different contact pin widths. • One-piece housing withstands great stresses. • Moulded barriers prevent short circuit. • Screw terminals enable quick connection.

Use: Single built-in sockets for installation in front plates, measuring device housings, etc. Attachment with two screws M 2.5. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body.

Use: Single built-in couplings for installation in front plates, housings, etc. Attachment with two screws M 2.5. Third connection for ground or continuous shield or three wire RTD. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

Use: Panel insert for thermocouple and RTD circuits. Mounting by means of two screws at front hole with a diameter of 22.5 mm. Ideal panelinsert for instrument cases. Mechanical design: • Housing of fibreglass-filled plastic. • Contacts of original thermocouple materials. • Spring-loaded sockets. • Reverse polarity protection by different contact pin widths. • Moulded barriers prevent short-circuits. • Screw terminals enable quick connection. • Polarity indication on body. • Stainless steel screws and brackets for front mounting.

Miniature Centrifugal Pumps of the BMK series have been desined for clean watercircuits of up to 160 degree C fluid temperature and up to 7 bar of system pressure. The pumps are equipped with a magnetic coupling. The pumps can be mounted vertically or horizontally. The specific design allows the pumps to operate wear poor. Impellers: peripheral Types of fluid: Industry water Volumetric delivery up to 55 l/min Delivery head up to 58 m Please contact us for delivery quantity

MONO RAIL is a profiled linear rail for high precision under heavy loads. Four rows of balls run in the self-lubricated slider. The running surfaces of the sliders and rails are hardened and polished. Sizes from 15mm to 55mm Standard and flat sliders, with and without flanges Different precision and preload classes Fixing holes from the bottom are available Comprehensive range of accessories, e.g. metal wipers or cover strips MINIATURE MONO RAIL models are mini linear guides with 7mm, 9mm, 12mm and 15mm widths, for particularly noiseless operations. Robust: corrosion and dust resistant Quiet running due to the unique ball channel’s geometric configuration Four-point contacts for equal load capacity in all directions Sliders can be separated from rails without losing balls Long maintenance intervals due to sealed lubrication cycle The MONO RAIL linear guides product family includes profiled linear rails to ensure the highest precision for heavy loads. The availability of sliders...

Complement of the lubricant-free delivery programs of screw drives small sizes. With spindles made of stainless steel and nuts made of the self-lubricating high-performance plastic iglidur® J. Application areas:small handlings, lab and medical technology, professional model construction, scanner, printer and locking systems Sleeve bearing with flange

Forget everything you know about miniature gears. Dimensions, weight, precision – the new Power Gear Miniature sets new standards. PowerGear Miniature has a sensationally small installation size, an extremely light-weight aluminium housing, maximum performance and precision as well as many other advantages. The unique design of PowerGear Miniature will open up a vast range of applications in drive technology. miniature gear for maximum precision low backlash and high transmission accuracy case-hardened bevel gear tooth system friction-locked shaft-and-bevel-gear fit energy-efficient through high level of efficiency of 98% extremely light-weight aluminium housing maintenance free through synthetic oil

Directly controlled brass solenoid valves in a very compact design for air, gases, steam and non-aggressive liquid media. In sizes 1/8" and ¼" as 2/2 and 3/2 Valve available in NC or NO with a choice of nominal widths from 1.5 to 4.5 mm in all common voltages and various sealing materials.

Use: Connectors for thermocouples and resistance thermometers measurement circuits. Suitable for measurement with small wires and mineral-insulated metal sheathed cables. Mechanical design: • Housing of high quality fibreglass-filled thermoplastic plastic • Contacts of original thermocouple material pins and spring-loaded inserts for reliable contact • Easy wire connection through sandwich construction • Reverse polarity protection by different contact pin widths • One-piece housing withstands great stresses • Moulded barriers prevent short circuit • Stainless steel screws with combination head (Slotted and Phillips) terminals enable quick connection