Metric threading - Import export

During re-machining, a cutting tool is used to remove material from a workpiece in order to shape or surface it as required. We offer re-machining (turning, twisting) as wage work. The following machining operations we offer: Turn thin stem, pins and tips Screw punctures, approaches and undercuts Heads of screws / cold shaped parts machining process (turning) further machining operations are possible on request. Our curve-controlled automatic Audrema lathes offer you further possibilities of finishing cold-moulded parts. These automatic lathes are designed to achieve maximum precision and reproducibility at high throughputs. Short loading and unloading times permit economical production of medium-sized and large series.

igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm When to use it? When you want to save weight When rotating, oscillating and linear movements should be implemented When high-frequency oscillations/vibrations predominate When a low-noise operation is desired When an electrically insulating part is required When freedom from corrosion is desired For combinations with pneumatic cylinders and gas struts When chemical resistance is required When high stiffening is required When not to use? When you have temperatures above +80°C (then HT options) When rotation speeds in excess of 0.5 m/s should be implemented When very high tensile and lateral loads prevail When applications should be implemented with hydraulic cylinder When dimensions over 30 mm are needed igubal® rod end bearing, female thread With female thread in metric and inch dimensions igubal® rod end bearing, female thread igubal® rod end bearing, male thread With male thread in metric and inch dimensions igubal® rod end bearing, male thread igubal® rod end bearing CL For simplified mounting, with inner and outer threads in metric dimensions igubal® rod end bearing CL igubal® rod End Bearing CL DT For simplified installation, detectable with female thread in metric dimensions igubal® rod End Bearing CL DT igubal® fitting screw, mm Fitting screw with circlip igubal® fitting screw, mm Special properties of the igubal® rod end bearings Maintenance-free, self lubricating High stiffening Very high fatigue strength in varying loads Compensation for alignment errors Compensation of edge loads Insensitive to dirt, dust and lint balls Resistant to corrosion and chemicals High dampening qualities Suitable for rotary, oscillating and linear movements Very low weight Dimensional series K and E, dimensions according to DIN ISO 12240 Version with metal sleeve in the spherical ball for enhanced torque Tolerances igubal rod end bearings can be used, according to the application, with different tolerances. They are designed with a large clearance in the standard product, which enables a secure operation even under high peripheral speeds. The bore of the inner ring has a tolerance according to E10. The shafts should have a tolerance between h6 and h9. Please contact us in case you require lower or more bearing tolerances. Loads igubal® rod end bearings take high forces in normal ambient temperatures, have excellent dampening properties and weigh only a fifth of the conventional metallic bearing housing. In particular cases the load carrying capacity of the rod end bearings should be checked in a practical trial especially with high constant loads and at higher temperatures. Coefficients of surface friction and speeds Rotary motions of the mounted shaft take place directly in the bearing ball made of iglidur® W300. The advantage of this plastic/steel plain bearing is that high speeds can be achieved in dry operation. Taking the radial loads into account, maximum surface speeds up to 0.5 m/s rotating can be attained. The maintenance-free igubal® rod end bearings casually permit linear and oscillating movements of the shaft. Delivery program igubal® rod end bearings are available in the dimensional series K and E for shaft diameters of 2 to 30 mm in all dimensions according to DIN ISO 12240, and of course respectively in the Form A - with male thread and Form B - with female thread The dimensional series K and partly E are moreover available in inch dimensions and – as special version – with a stainless steel sleeve in the spherical ball. Thereby an essentially higher tightening torque is possible than with the plastic spherical ball. Please ask us for other sizes. igubal® rod end bearings - Applications igubal® rod end bearings - Applications Temperatures Dimensional series K in A+B variants for temperatures upt to +200°C (HAT material).

The Micro Screw range consists of self-tapping and metric standard screws along with metric threads according to customer-specific applications. When the trend is to minimize the size and weight, these durable and small dimensioned screws provide the required competitive advantage where even the smallest gram and millimeter counts. FEATURES & BENEFITS • Diameter range of M 0.8 – M 2.6 • Lengths reaching up to 10x the thread diameter • Capability of various thread heads • Reliability with 50ppm • Thread-forming of even the smallest components for direct assembly • Cost-effective as additional inserts and add-ons are redundant • Time effective as cycle times are minimized in work-flow • Assembly is possible in the smallest of installation spaces • Available in plastic, light metal, and steel materials for use in automated assembly The Micro Screw is available as self-tapping, metric standard as well as customer-specific applications with metric threads.

provide precise performance for small components with a range consisting of self-tapping and metric standards as well as any threads according to customer specific applications. Diameter range of M 0.8 – M 2.6 Lengths reaching up to 10x the thread diameter Capability of various thread heads Reliability with 50ppm Thread-forming of even the smallest components for direct assembly Cost effective as additional inserts and add-ons are redundant Time effective as cycle times are minimized in work-flow Assembly is possible in the smallest of installation spaces Available in plastic, light metal and steel materials for use in automated assembly The Micro Screw is available as self-tapping, metric standard as well as customer-specific applications with metric threads.

flat head screw with metric thread and hex socket

Features • Ideal for perforated brick (Poroton) and cellular concrete (Ytong) • Extremely high holding values • Spreads in several directions • Rotors prevent rotation in the drill hole • 100% nylon • Long expansion range for secure anchoring • Also suitable for metric threaded rods Description & Area of Application • Multiple expansion by 2-way separated expansion elements which are offset by 90° with moving rotors and flexible wall plug neck • Large anchoring depth

With metric or Whitworth pipe thread boss We would be very pleased to support you with all your individual questions and suggestions regarding WUS. Give us a ring or leave a message indicating the information you need. We will contact you as quickly as possible. Your WUS team

The SPIROL Model HA Automatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. With this exceptionally versatile machine, the operator does not need to physically touch the Insert during the entire installation process. SPIROL’s Model HA Automatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HA Automatic Heat Insert Driver installs Threaded Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads. The machine can be configured to accommodate a variety of applications and the heat tips are easily interchangeable to accommodate various sized Inserts.

The SPIROL Model HP Pneumatic Heat Insert Driver provides an accurate and consistent method to install virtually any type of Heat/Ultrasonic Style Insert into thermoplastic assemblies. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HP Pneumatic Heat Insert Driver has been designed to eliminate the dependency on the operator to control the factors of time, temperature and pressure to ensure nearly perfect flow of the plastic for optimal retention and performance. The Model HP Pneumatic Heat Insert Driver installs Inserts ranging in size from M2 – M8 metric threads and #2 – 3/8 unified threads.

Designed to install virtually any type of Heat / Ultrasonic Style Insert. As much as 75% of an Insert’s performance is the direct result of how well it was installed. Therefore, in order to maximize performance, all of the factors that impact installation must be carefully controlled. SPIROL’s Model HM Manual Insert Driver has been designed to eliminate the dependency on the operator to control these factors. The result is nearly perfect flow of the plastic for optimal retention and performance. The Model HM Manual Insert Driver is simple to operate and easily adjustable. The Model HM installs Inserts ranging in size from M2 - M6 metric threads and #2 - 1/4 unified threads, and the simple up-down adjustment of the machine makes it easy to accommodate various sized plastic components.

Load cell model 8417 measures the tension or compression force between both axially mounted metric exterior threads on the cylindrical sensor housing. Forces are only applied to the threadings, which are especially long, to accommodate counter nuts and must not be affected by external influences such as bending, lateral force or torsion. Any contact with units affixed to the sensor housing - even on the front - must be avoided. The measurement element is a membrane perpendicular to the axis of the sensor with a strain gage full bridge applied to the inner surface, which requires stable excitation with a rated value of approx. 1 mV/V. The connection cable is led radially out of the housing through a sleeve which is used for strain relief. FEATURES: —Measuring ranges from 0 ... 10 N to 0 ... 5 kN —Very small dimensions —Made of stainless steel —Rugged construction —Simple screw mounting —burster TEDS optionally available

The PERFECT cable gland made of nickel-plated brass is the perfect cable entry solution for many industrial applications. Features: — integrated anchorage for cables — protection against twisting — wide sealing and clamping range — for cables from 3 to 48 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — protection grade IP68 - 5 bar / IP69 — test certificates VDE / UL / DNV — many variations and accessories available

The PERFECT cable gland made of stainless steel 1.4305 is the perfect cable entry solution for many industrial applications. Features: — integrated anchorage for cables — protection against twisting — wide sealing and clamping range — for cables from 3 to 42 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 / IP69 — Test standard UL 514B — with metric thread M12 - M63

The WADI one EMC cable gland made of nickel-plated brass is the perfect cable entry solution for cables with shielding. Features: — quick and easy EMC connection — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +100 °C (dynamic) — protection grade IP 66 / IP68 up to 15 bar (30 min.) / IP69 — material of sealing insert fulfils UL 94 HB — with metric thread from M12 to M63

The WADI one cable gland made of stainless steel is the perfect cable entry solution for demanding applications. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +100 °C (dynamic) — protection grade IP 66 / IP68 up to 15 bar (30 min.) / IP69 — material of sealing insert fulfils UL 94 HB — with metric thread from M12 to M63

The WADI heat cable gland made of stainless steel 1.4404 / AISI 316L is the perfect cable entry solution for high temperature applications up to +200°C. It has also a very good resistance against many chemicals. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — very high UV, ozone and weather resistancy — temperature range -40 °C / +200 °C (dynamic) — protection grade IP 66 / IP67 / IP69 — very good resistance against many chemicals — with metric thread from M12 to M63

The WADI heat cable gland made of nickel-plated brass is the perfect cable entry solution for high temperature applications up to +200°C. It has also a very good resistance against many chemicals. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +200 °C (dynamic) — protection grade IP 66 / IP67 / IP69 — very good resistance against many chemicals — with metric thread from M12 to M63

The WADI one cable gland made of nickel-plated brass is the perfect cable entry solution for demanding applications. Features: — large-area sealing protects the cable — integrated anchorage with high retention — wide sealing and clamping range — for cables from 3 to 53 mm — the inner sealing ring can be removed easily for larger cables — high UV, ozone and weather resistancy — temperature range -40 °C / +100 °C (dynamic) — protection grade IP 66 / IP68 - 10 bar (30 min.) / IP69 — material of sealing insert fulfils UL 94 HB — with metric thread from M12 to M63

The CLAMPING JAW cable gland made of nickel-plated brass is the cable entry solution for applications where increased anchorage is required. Features: - increased centrical anchorage - for cables from 5,5 to 45 mm - temperature range -30 °C / +100 °C - Protection grade IP54 - with metric or Pg-thread

The PERFECT cable gland with spiral top is the perfect cable entry solution for movable flexible cables. Features: — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 18 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 - 5 bar — Test standard UL 514B — with metric, Pg- or NPT-thread

The PERFECT cable gland made of polyamide V-0 is the perfect cable entry solution for areas where superior claims on fire protection are required. Features: — Polyamide material fulfils UL 94 V-0 and EN 45545-2, R22: HL3, R23: HL3 — integrated anchorage for cables — wide sealing and clamping range — for cables from 3 to 42 mm — easy-to-install — temperature range -20 °C / +100 °C (dynamic) -40 °C (static, short term) — Protection grade IP68 — Test standard UL 514B — with metric or Pg-thread

HAWKE ICG 653/UNIVERSAL is a compound barrier gland for armoured or braided cables which provides an inspectable, repairable barrier seal. It is suitable for all armour / braid types. It is also suitable for non armoured cables or cables with fibre optic cores. Available materials: Brass, Nickel plated brass, Stainless Steel 1.4404, V4A, 316L, Aluminum Types of Protection: Ex db IIC Gb, Ex eb IIC Gb, Ex nR IIC Gc, Ex tb IIIC Db Suitable for use in Zone 1, Zone 2, Zone 21, Zone 22 and in Gas Groups IIA, IIB and IIC. Explosion-proof acc to ATEX/IECEx Temperature range: -60 °C / +80 °C Clamping range: 5,5 mm to 78,0 mm Thread options: metric M20 to M75, NPT 1/2" to 3" Protection grades: IP66, IP67, IP68 (30 metres for 7 days), IP69, Deluge Protected DTS01, NEMA 4X

Designed to be used as filler ports for hydraulic reservoirs, allowing the reservoir to breathe whilst protecting it from contamination found in harsh environments Types ▪ SES 1 (Screw-in version) ▪ SES 2 (Welded version) Features ▪ Cap diameter of Ø62 mm / Ø2.44 in ▪ Screw-in version, equipped with male Metric ISO thread M45 x 2 and lock nut, or welded version with welding socket made of Steel (1.0718), untreated ▪ Supplied with 45 μm air filter element Materials ▪ Breather cap made of Polyamide (PA) ▪ Breather body / stud made of Polyamide (PA) ▪ Nut (type SES 1) made of Steel (1.0718); ▪ Polyamide (PA) available on request ▪ Welding socket (type SES 2) made of Steel (1.0718), untreated; Stainless Steel (V2A) available on request ▪ Air filter element made of Sintered Bronze ▪ Basket made of Polyamide (PA) ▪ Dipstick made of Steel (1.0718) ▪ Sealings made of NBR (Buna-N®) Consult STAUFF for alternative materials. ▪ Plastic basket (300 μm) ▪ Metal dipstick

Thread electrodes for EDM

- Metric thread- With hexagon socket - Chambered O-ring - Seals FKM - Material 1.4301 / 1.4307 - Temperature range: -20 to +120 °C - Pressure range: -0,95 to 16 bar - Media: Air, vacuum and liquids

- Metric thread- Chambered O-ring - Sealing NBR - Material brass nickel-plated - Temperature range -4 to 176 °F (-20 to +80 °C) - Working pressure range -14 to 232 psi (-0.95 to 16 bar) - Swiveling, but not designed for steady motion of the tube

— Metric thread with hexagon socket — Chambered O-ring — Sealing NBR — Material brass nickel-plated — Temperature range -4 to 176 °F (-20 to +80 °C) — Working pressure range -14 to 232 psi (-0.95 to 16 bar)

- Metric thread - Chambered O-ring - Seals FPM - Material stainless steel 1.4301/1.4307 - Temperature range -20 to +120 °C - Working pressure range -0.95 to 16 bar - Swiveling, but not designed for steady motion of the tube

- Metric thread - Chambered O-ring - Seals FPM - Material AISI 304/ 304L (1.4301 / 1.4307) - Temperature range -4 to 248 °F (-20 to +120 °C) - Working pressure range -14 to 348 psi (-0.95 to 24 bar) - Not designed for steady motion of the tube