Measurement data - Import export

SoftTesT is an evaluation software for measurement data, obtained from the evaluation electronics 813 or dynamometers 323. By means of SoftTesT measuring values are transferred to the PC in the form of CSV files (compatible with Excel), for a further, simple analysis and graphic illustration. For data transfer to the PC an USB interface cable is necessary.

Four QuellTech Q6 3D- laser scanners are installed, mutually displaced by an angle of 90°. In this configuration, they are able to monitor the complete surface of the cable running through. It is important that the test does not lower the production speed, therefore very high sampling rates are required, supported by convenient data processing. The measured position of a defect is recorded in cable direction.

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and Fieldbus controller can be integrated into any existing setup. The Fieldbus controller delivers all signals exactly where they are needed, to be combined, checked and linked. With the available Fieldbus interfaces, you are flexible, perfectly connected and you save time, costs and other resources when linking to and integrating into existing systems. Due to the integrated measuring input, the use of a Fieldbus controller module is sufficient for single-channel applications. For multi-channel applications, the system can be expanded to up to 9 measuring channels. Up to 8 bus-compatible model 9250 instrumentation amplifiers can be cascaded on the model 9251 Fieldbus controller.

Measurement data via Ethernet For DASIM and SIQUAD systems Recording visualisation editing Export to a variety of formats

DigiVision offers innovative functions such as practical calibration tools, configurable single-channel or multichannel views for displaying both measurement curves and values, and custom zoom functions. With a choice of trigger functions, every application has a wealth of options for activating data acquisition. Important performance features include automatic device detection, device-parameter backup and archiving of measurement data in Excel or raw data format. In the world of production and quality assurance, coping with an ever increasing variety of software is part of daily life. Operating several different instruments at once is easier if each device can be operated in the same way. All burster indicators and USB sensor interfaces are equipped with the DigiVision PC software. This data-acquisition and configuration software even supports indicator units purchased years ago.

Data logging & analysis The mLog software is a data logging application for Mahlo equipment. The desktop application runs on an office PC and provides comfortable creation and archiving of PDF protocols of running measurements. The recording of the measurement data is controlled on the Mahlo device PC, the finished protocols are transferred to mLog. An advanced search function with filter categories makes finding logs easy and fast. In the protocol viewer the protocol can then be displayed, printed, saved or sent by e-mail.

Optimal recording of measuring data such as for temperature, humidity, pressure or light in either one or more locations. The data is transmitted by WLAN directly into the Cloud. Control of the measurement data from each device and from any location

Optimal recording of measuring data such as for temperature, humidity, pressure or light in either one or more locations. The data is transmitted by WLAN directly into the Cloud. Control of the measurement data from each device and from any location.

Optimal recording of measuring data such as for temperature, humidity, pressure or light in either one or more locations. The data is transmitted by WLAN directly into the Cloud. Control of the measurement data from each device and from any location.

Optimal recording of measuring data such as for temperature and humidity in either one or more locations. The data is transmitted by WLAN directly into the Cloud. Control of the measurement data from each device and from any location.

Optimal recording of measuring data such as for temperature and humidity in either one or more locations. The data is transmitted by WLAN directly into the Cloud. Control of the measurement data from each device and from any location.

The IF1032/ETH interface module now enables to run sensors with analogue interfaces with the proven web interface. With the Ethernet interface, measured data can be easily displayed on a PC. Moreover, sensors can be connected to an EtherCAT bus. The RS485 interface allows connection of new sensors using the Micro-Epsilon specific RS485 protocol.

The TagTemp is a small portable electronic data logger for measuring and recording ambient temperature changes for applications - on the move.

The TagTemp is a small portable electronic data logger for measuring and recording ambient temperature changes for applications - on the move.

The TagTemp is a small portable electronic data logger for measuring and recording ambient temperature changes for applications - on the move.

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +180 °C, continuous Wire type: Silicone, Tmax: +180 °C, continuous

The FIAStudio is controlled by PC via serial interface. The software is a database application with Windows interface for: control of the FIA-System control of the autosampler configuration of the system design and modification of analytical procedures automated startup and shutdown of the FIA channels administration of the sample tray date acquisition from the FIA channels presentation and processing of the measured data presentation of the signal peak with zooming possibilities recording the results of single samples and sample series archiving of results service functions FIAStudio has been developed by: hsc - Dr. Herbert Steiner Consulting

The TagTemp is a small portable electronic data logger for measuring and recording ambient temperature changes for applications - on the move.

The TagTemp is a small portable electronic data logger for measuring and recording ambient temperature changes for applications - on the move.

3DInspect is a uniform and user-friendly software tool for all 3D sensors from Micro-Epsilon. Parameter setting of the 3D sensors and recording of the measurement data are done directly in the 3DInspect software. Powerful tools allow point cloud alignment and filtering, intuitive detection and selection of relevant areas, and program combination. The 3D point clouds can be processed as required and measured values can be output to the controller.

The dimensionCONTROL TMWI 8302.LC system is suitable for the inline weight inspection of continuous running rubber profiles (tread pattern or sidewalls) for passenger and truck tires. Based on the force measurement principle, the inspection system uses two load cells which measure the deflection of the measurement conveyor. These sensor elements are attached to a massive construction, which ensures a long-term mechanical stability of the system. The measurement conveyor uses precise and balanced aluminum rollers with special surface treatment. This ensures a low deadweight, avoids influence of unbalance and eliminates material sticking. Data obtained from the load cells are processed in the implemented PLC cards which determine the measured weight mathematically.The software included offers a variety of measurement data processing, definition of design profiles, statistical analysis of measured profiles and diagnostic tools.

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.).

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +750 °C, continuous,depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Fibreglass with VA braid, Tmax: +450 °C

With the very simple operation and the generated and saved measurement protocol, the documentation can be created quickly and completely reproduced. It is possible to save the measurement data in the device and to print it out again later. No tracer gas nor a second measuring device are required for use. The internal battery, the 230V charger or the 12V vehicle voltage can be used for the energy supply. All included in a complete set. Ethane is always contained in natural gas; evidence of this gas is also evidence of natural gas. A lengthy gas analysis is normally required to prove beyond any doubt that the measured gas concentration is actually natural gas and not swamp gas. This, also due to the sampling, a difficult and time- consuming process, is completely eliminated. Measurement and sampling directly at the borehole is easily possible. The printout can take place after the measurement.

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point is hot junction insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. Sheathing thermocouples are freely flexible across their entire length. That means the thermocouple can be integrated in the installation point. The temperature to be measured can therefore be registered near the desired measuring point. A possible connection lead permits simple routing up to the measured-data acquisition. Options are available for the element diameter, element and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +1.100 °C, continuous, depending on selected sheathing diameter and measuring medium or atmosphere Wire type: Fibreglass with VA braid, Tmax: +450 °C continuous

Sheathing thermocouples can be used anywhere due to their ruggedness and small design. Whether in industry, development or in the lab. The measurement point comes insulated as standard to exclude any falsification of the measurement evaluation through superposition of the offsets. The connection lead permits simple routing up to the measured-data acquisition. Options are available for the probe diameter and wire length as well as the type of connection configuration (plug, socket, bare wire ends, etc.). Temperature range: -100 °C to +260 °C, continuous Wire type: Teflon with CU shielding, Tmax: +200 °C, continuous

The Datapaq Rotational Furnace Tracker Systems from Fluke Process Instruments features the Datapaq TP6 data logger, a rotational evaporative barrier, thermocouples and our intuitive Insight™ Software to create a complete solution. This system is designed to be fitted to the end of test logs or inside pipes to travel through your process measuring data from the product and can be used in applications up to 1000°C (1832°F). Data Logger The Datapaq TP6 is the perfect solution for the most demanding high-temperature profiling applications with a 316-grade machined stainless-steel case and IP67 rating. Once combined with the Datapaq Insight™ or Datapaq Insight Furnace Surveying software you can display information from the data logger in real time via the optional Radio Frequency (RF) system or via standard USB/Bluetooth connections. Available in 10 and 20 channel configurations and two case styles Water resistant (IP67 rated) Communication via USB or Bluetooth

The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.

The 8661 precision torque sensor is the ideal choice for reliable measurement of static and dynamic clockwise and counter-clockwise torques. Thanks to its high measurement quality and low linearity error, the sensor is equally at home in quality control or research & development. Designed for non-contact operation and zero-maintenance, the 8661 is also ideally suited to the production environment, whether on shift-based production lines, test benches or end-of-line test systems. The 8661 torque sensor is the specialist device for constant torque measurements during continuous operation and for test-bench measurements of holding, friction, break-away or tightening torques. An optional built-in incremental encoder disk with up to 2000 increments makes the sensor the perfect alternative where space or budget rule out an additional angle or speed sensor. For mobile use and for instant digital access to measurement data, the 8661 torque sensor is also available with a USB interface.