Results for
BURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The new strain gage amplifier with IO-Link interface enables digitalization of the measurement technology right from the sensor. Its compact design and high degree of protection allow the instrumentation amplifier to be used practically anywhere in the field. Strain gage sensors typically have an output voltage of a few millivolts. In industrial environments, e.g. in the vicinity of electric motors or frequency converters, interference can affect the measurement result when transmitting analog signals. This is reliably avoided using the new strain gage amplifier with IO-Link interface. The analog link between the sensor and instrumentation amplifier is kept as short as possible, the standardized IO-Link communication is fully digital and interference-free. The amplifier is powered directly via the IO-Link interface – a standardized 5-wire cable with M12 socket. Strain gage sensors can be connected via a 4-pin M8 connector.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
In practice the requirement often arises to convert the measurement signals of a sensor into a standard signal in the simplest possible manner in the immediate proximity of the sensor. This permits trouble-free, low-loss transmission of measured values over longer distances to an instrument board or plant controls. Ideally suited for this purpose is the in-line measuring amplifier, which is inserted in between in the connection cable by means of plug contacts. Owing to its compact, robust design and low weight, it finds use in almost any application. Even movable locations subject to forces of acceleration, for example manipulators, present no problems. It is intended mainly for use of control cabinets in just about any location and is matched to a specific sensor. The aluminium housing is extremely sturdy and affords the greatest possible protection even in harsh environments.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The amplifier module model 9243 is used wherever measurement signals from strain gauges, potentiometric sensors or DC/DC sensors have to be converted into standard signals. Simply by mounting on conventional DIN-mount rails, it is possible to position the amplifier module on location, in the proximity of the sensor. Especially for rough environments a IP65 version is available. The broad auxiliary power range and the choice between AC or DC permits operation on standard power supplies used in switch gear cabinets. A highly precise reference voltage source is built-in for calibration purposes. A calibrating shunt can also be connected via two separate terminals. This permits deliberate detuning of a strain gauge sensor for calibration or merely to check the measuring chain.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and Fieldbus controller can be integrated into any existing setup. The Fieldbus controller delivers all signals exactly where they are needed, to be combined, checked and linked. With the available Fieldbus interfaces, you are flexible, perfectly connected and you save time, costs and other resources when linking to and integrating into existing systems. Due to the integrated measuring input, the use of a Fieldbus controller module is sufficient for single-channel applications. For multi-channel applications, the system can be expanded to up to 9 measuring channels. Up to 8 bus-compatible model 9250 instrumentation amplifiers can be cascaded on the model 9251 Fieldbus controller.
Request for a quoteHANS TURCK GMBH & CO. KG
Germany
We offer the appropriate interface device for separating, forming, processing, converting and conditioning analog signals. The product portfolio comprises analog signal isolators, isolating transducers, temperature measuring amplifiers, potentiometer amplifiers, trip amplifiers and level monitors - for simple and complex requirements, for Ex- and non-Ex applications, available in the IP20 housing for DIN rail as well as in the compact IP67 housing for decentralized on-site remote control.
Request for a quoteHANS TURCK GMBH & CO. KG
Germany
The modules of the IMSP series are connected before the interface devices and provide reliable protection against voltage surges. The only 6.2 mm wide DIN rail devices are IP20 rated and can be used in the Ex and non-Ex area. Among other things, modules are available for surge-protected connection of analog signals (e.g. for analog signal isolators and temperature measuring amplifiers) as well as for connecting binary signals from switches or inductive and capacitive sensors.
Request for a quoteGHM MESSTECHNIK GMBH
Germany
4-channel DMS amplifier Scanning rate 20 kHz with 24 bit DMS full, half, quarter bridge Ethernet, CAN
Request for a quoteGHM MESSTECHNIK GMBH
Germany
2-channel HV amplifier Scanning rate 20 kHz with 24 bit Voltage up to 1 kV Ethernet, CAN
Request for a quoteGHM MESSTECHNIK GMBH
Germany
4-channel universal amplifier Scanning rate 20 kHz with 24 bit Supports more than 12 sensor types Ethernet, CAN
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The new 9250/9251 amplifier generation unites all the features that make modern measurement data acquisition actually possible for the first time. Network-compatible, high-precision, user-friendly, smart and versatile: the combined system of amplifier module and bus controller can be integrated into any existing setup. The amplifier 9250 in conjuction with the fieldbus controller 9251 takes signals exactly to the point where they can be combined, monitored and linked efficiently to other data. The fieldbus interfaces give you flexibility, speed and perfect connections, and save you time, money and other resources when integrating your measurement setup with existing systems. Automatic sensor recognition due to burster TEDS lets you play absolutely safe, protecting you from setting incorrect parameters. The broad supply voltage range permits operation on standard power supplies used in switch gear cabinets.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Inductive displacement sensors using the principle of the differential transformer (LVDT) can be used to measure displacement and, indirectly, magnitudes that can be converted into displacements such as force, pressure, strain, torque, vibration and so forth. Thanks to the high quality of their measurements, their high protection and long service life, these sensors are used in many technologies (industry, research, development, etc.). Applications include measuring, controlling, regulating and monitoring both slow and fast movements between machine parts, measurements of position and positional changes of components and structural foundations, servo regulators, valve and robot controllers, growth measurements and so on. Their design is robust - the internal coils and electronics are potted - as a result of which the sensors can easily withstand shock and vibration.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The pressure transmitter illustrated here measures differences in pressure between the two connections of the measuring element. Pressure differences can be measured with respect to a reference pressure, such as atmosphere, or to the command variable of a regulation system. Equally, however, it is possible to measure pressure differences within systems that have a high static pressure. One practical example of this would be measuring a flow rate by determining the pressure drop occurring across a metering diaphragm. The differential pressure transmitter measures in both directions and can therefore, for instance, be used on double-acting hydraulic cylinders. Its construction permits it to be used with liquid or gaseous media. Venting holes simplify installation. The robust design and the use of stainless steel make it possible to use the pressure transmitter under tough operating conditions.
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
Situations often occur in practice in which it is necessary to place a measuring amplifier immediately in the neighborhood of the sensor in order to be able to access a standard signal there. In this way, long distances to the evaluating electronics can be covered. This task can ideally be performed by the 9236 in-line measuring amplifier. With its high degree of protection (IP67) its singlechannel version can be integrated into the application even in the tough environment outside the switch gear cabinet. — Automatic production machinery — Laboratory measurements — Integration into customer‘s circuit boards — Field measurements Features: — Operates with up to 4 measuring channels — Voltage output 0 to ± 5 V / 0 to ±10 V — Protected against reverse connection and short-circuit — Also available as circuit board without housing — Simple configuration using DIP switch — High degree of protection up to IP67
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
The sensor model 8228 with its measuring accuracy of 0.05% F.S. (for the measuring ranges ≤ 1 bar, the measuring accuracy is 0.1% F.S.) ideally suited as a reference sensor. The compact dimensions, the robust housing and the industrial-grade output signal result in a very wide range of applications. All components in contact with media are made of stainless steel. An integrated measuring amplifier converts the measuring signals directly into interference-free voltage signals or current signals that can be transmitted over long distances. With the „gage“ measurement type, the pressure measurement is carried out against the ambient pressure, the sensor has a bore that is protected against ambient influences to compensate for the ambient pressure. With the „Absolute“ measurement type, the applied pressure is measured against an enclosed vacuum; this measurement type is available from the measuring range 0 ... 250 mbar. The electrical connection is made via an M12 x 1 connector.
Request for a quoteEDDYLAB GMBH
Germany
Based on the SL series, the SLT probes are also characterized by an ultra robust construction and a fully stainless steel housing which makes them suitable for harsh environments. The combination of a hardchrome plated shaft with 6 mm in diameter and precision bearings guarantees highest resistance to lateral forces on the push rod. There are three different functional variants available to meet the demands of most measuring tasks: ■ Spring loaded mechanism: The push rod is fully extended by an internal spring. ■ Pneumatic version 1: The push rod extends by applying pressurized air. An internal spring retracts the push rod after releasing the pressure. ■ Pneumatic version 2: The push rod retracts by applying pressurized air. An internal spring extends the push rod after releasing the pressure. Each sensor requires a carrier frequency measuring amplifier to operate, which evaluates and transforms the sensors signal to a standardised analog output signal of 0...10 V or 4...
Request for a quoteBURSTER PRÄZISIONSMESSTECHNIK GMBH & CO KG
Germany
This transducer can be used anywhere thanks to its small size. Designed to work without a measuring chamber (uses a flush front diaphragm instead), this transducer is ideal for any measurements where the material to be measured may leave problematic residues. The range of suitable applications is even greater thanks to a choice of screw-on or weld-on adapters. Areas of use: Bottling plants, food industry Mixing facilities for the chemicals industry Pharmaceuticals Cosmetics industry Bioengineering These miniature pressure transducers are made entirely of titanium and therefore have outstanding resistance to corrosion. These convert the pressure-induced deflection of the diaphragm into a change in electrical resistance, which can be amplified, measured and processed by external electronic circuitry.
Request for a quoteETH MESSTECHNIK GMBH
Germany
1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 1 On request also available: 1800 Nm max. on 1 3/8“ shaft according to ISO 500-3:2014 Type 2 2500 Nm max. on 1 3/4“ shafts according to ISO 500-3:2014 Type 3 contactless signal transmission built-in measuring amplifier rotation angle measurement (optional) extended EMC strength adjustable output level of rpm and angle signal (5V-24V) Frequency output 10kHz ±5kHz large input voltage range (10-28,8V) strain gauge technology robust design for use in field applications IP67 easy installation accurate results (0.2% accuracy) The torque sensor DRVZ provides a precise measurement of torque and angle of rotation when testing systems that are driven by PTO shafts, such as a tractor gearbox.
Request for a quoteDo you sell or make similar products?
Sign up to europages and have your products listed
ETH MESSTECHNIK GMBH
Germany
11 torque range from ± 0 - 0,5 Nm to ± 0 - 1000 Nm Low cost. Very short. Broad input voltage range. Current output and voltage output. Optional speed measurement. Measurement accuracy: ≤ 0,5% of full scale. Torque ranges from 0,5 to 1000 Nm. Multipurpose use. Contactless transfer of measurement signal. Integrated signal amplifier. Proven strain gage technology. Single power supply.
Request for a quoteEGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH
Germany
EGE sensors for fluid mediums with integrated measuring & amplifier are compact devices with extremely robust housing and integrated measuring and amplifier. The current flow state is displayed at the sensor using LEDs. The measurement takes place without mechanically moving parts using a thermal measuring element. Limit values are set directly at the device. These sensors are used wherever a safe, reliable and low-maintenance recording of flows is required. This includes e.g. all automation and chemical industries in the most varied areas, such as cooling circuit monitoring, monitoring the flow rate of process fluids, monitoring metering processes or also for pump protection.
Request for a quoteEGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH
Germany
EGE compact devices for the flow monitoring of gaseous media contain measuring and amplifier in a single housing. They are used where a visualisation of the flow rate on site is required. EGE flow sensors for gaseous media feature two pins which contain the thermal measuring elements. The sensors are set up directly at the device. EGE sensors for gaseous media are characterised by a rapid response capability and reliable operation. Based on the principle, there are no moving parts in the air flow monitors and they can, therefore, also be used in aggressive environments. Devices for air conditioning technology have smooth measuring surfaces and need not protrude far into the flow duct.
Request for a quoteEGE-ELEKTRONIK SPEZIAL-SENSOREN GMBH
Germany
EGE flow sensors for gaseous media in explosive areas permit the space-saving flow measurement on site and the comfortable setting of the limit value using separate amplifier. The measurement takes place without mechanically moving parts using a thermal measuring element. The current flow state is displayed at the amplifier using LEDs. The devices are used wherever a safe, robust and low-maintenance monitoring of flow values is required. The measuring sensors of the product series ST 400 Ex; STS; STEX have ATEX approval and may, dependent on their design, be used in Gas-Ex areas requiring equipment for EPL Ga or EPL Ga/Gb. In the Dust-Ex area their use is permitted up to EPLDa.
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel stick-in sensor, Pt100, integrated measuring amplifier. Compact and robust design up to protection class IP68. High accuracy, with integrated signal converter (standard industrial signals). Available in various immersion depths. Over voltage and overload protection. In 2-wire or 3-wire version. Can be used universally; suitable for long line lengths. Measuring ranges can be customised.
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel stick-in sensor (B form), Pt100/Pt1000, thermocouple, NTC thermistor. Compact and robust design (form B connection head). Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via compression fitting. Sensor elements: Pt100, Pt1000, NTC thermistor, type K or type J thermocouple; two integrated sensor elements available as an option. Increased measuring range up to 800 °C. Available in various immersion depths. Form B connection head. Available with integrated measuring amplifier. Approvals: BV, DNV-GL, LR
Request for a quoteNORIS GROUP GMBH
Germany
Stainless-steel stick-in sensor (B form), Pt100/Pt1000, thermocouple, NTC thermistor. Compact and robust design (form B connection head). Ideal for shipbuilding, thanks to their construction and approvals. Simple assembly via protection tube Sensor elements: Pt100, Pt1000, NTC thermistor, type K or type J thermocouple; two integrated sensor elements available as an option. Increased measuring range up to 800 °C. Available in various immersion depths. Form B connection head. Available with integrated measuring amplifier. Approvals: BV, DNV-GL, LR
Request for a quoteResults for
Measurement amplifier - Import exportNumber of results
25 ProductsCountries
Company type