Material fasteners - Import export

is a special fastener designed for reliability and an easy direct assembly into thermoplastics. Enhancement when compared with Polymate30: The re-designed geometrical flank allows for optimized movement of plastic material while initiating the fastening procedure. Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. At the same nominal diameter, up to 50% gain in torsional and tensile strength. As there is a larger core and reduction in the thread pitch length, shorter fasterners and/or smaller diameters may be used. Improved pitch provides added vibrational safety. SOMETIMES SMALLER IS BETTER The visuals below show the advantages of a reduced fastener length and diameter by comparing Polymate30 to Polymate20. Substitute A provides a reduction in length, whereas Substitute B provides a reduction in diameter. For both scenarios, the reduction in pitch from the Polymate20 provides a maintainted thread flank.

FEATURES AND BENEFITS Enhancement when compared with Polymate30: • The re-designed geometrical flank allows for the optimized movement of plastic material while initiating the fastening procedure. • Under static and dynamic stress, a considerable increase is ensured in the service life of the joint. • At the same nominal diameter, up to 50% gain in torsional and tensile strength. • As there are a larger core and reduction in the thread pitch length, shorter fasteners and/or smaller diameters may be used. • Improved pitch provides added vibrational safety.

With FTJ-filter cloths, you can choose from approx. 40 high-quality fabric qualities, which fit your needs. The cloths consist mainly of polypropylene, polyester, polyamide and cotton. We would be pleased to advise you competently in the selection of the right filter cloth. In order to achieve the best results, fabric quality, grammage, air permeability and surface finish must be optimally tailored to your individual requirements. You can also get under-cloths at Filtertechnik Jäger. Drainage and cake drying can be improved. They also protect the upper cloths from mechanical wear. Special versions: Edge reinforcement Edge coating Reinforcement at supporting cam area Cloth collar from different materials Velcro fasteners Under-cloths/supporting fabric

Highquality pump dispenser, made in Germany. For all Geck disinfection systems. Also available for wall mounting. Inquire now. Permanently available Made by Geck Produced in Germany Manually operated pump dispenser (handle length approx. 14 cm), with universal holder for 1,000 ml Euro bottles Material housing made of stainless steel and plastic, white Scope of delivery pump dispenser, 1,000 ml disinfectant container, fastening material for wall mounting Optional ,with wall panel including printing of pictograms hand disinfection ,Drip tray with stainless steel holder and plastic tray Contact us at any time via gesundheit@geck.de or visit our website https//www.geck.de/en/healthpreventionsystems.

Self-forming screw, Torx & Self-tapping screw, hexagon socket Connection of two aluminium profiles; no thread cutting is necessary to fix the screw; because of the special form of the head of the screw and the self-forming thread, a conductive connection of two proviles is achieved Material: Zinc plated steel Self-forming countersunk screw, with hexagon socket For all mounting applications of the front of the aluminium profile; detachable and reusable; designed for optimized fastening strength Material/surface: Steel burnished or galvanised Note: can be screwed on Cover cap available in the product portfolio Self-forming button-head Screw To fix connection angles, angles, turn-locks and other components to the core hole of the aluminum profile Material: zinc plated steel Alternative: Connecting screw M12x30 (optionally Torx) for connecting two aluminium profiles Material: zinc plated steel

EMKA offers a comprehensive product range of ingenious locking technology from a single source. The modular program structure allows a unique variety of components: quarter turns, locking-systems, handles, hinges and gasketings. The high quality and product standards are guaranteed by an excellent manufacturing know-how and by the certified process control according to ISO 9001. These Emka handles are bow type handle with small head that complies to DIN ISO 2009, 2010, 7046-1, 7046-2, and 7047 class. They are available with different sizes and are made up of black polyamide that can be mounted on either screw from front or rear. However, fastening material is not included in delivery.

Plant construction requires compensation of thermal and mechanical expansion. Our solutions are just as varied as the wide range of applications. Why not make use of our long years of experience? We provide assistance in both word and deed, calculate the technical design and give you individual advice – also on site. Applications: Power stations, major plants, blast furnaces, domestic installations, shipbuilding, chemical and food production plants, paper industry, engine systems, ventilation construction, sewage systems, material moving systems, silencing applications Nominal widths: DN 20 to DN 5000 Structural lengths: Varying standard structural lengths or custom production Connection types: - Flanges: RSt 37-2 blue chromated or stainless steel – other materials on request - Clamp fastening

Material Draht: 12mm Design Drahtbiegeteil Fastener Anschweißen Application Metallbehälter

Application zur Sicherung des geschlossenen Zustandes eines Spannringes jeder Art Material 0.3mm, verzinkt Design - Fastener -

Application zur Sicherung des geschlossenen Zustandes eines Spannringes jeder Art Material 0.5mm, verzinkt Design - Fastener -

The filter housing is made of sturdy steel plate with a reinforcement of structural steel frame. Equipped with inlet and outlet openings for the dusty or filtered air. The inspection cap is used to control the automatic filter and has a flap for access to the built-in filter cartridges. These are made of folded polyester material having a filter area of each of 8 and 14 m². Provided with upper and lower reinforcing rings of plastics material for fastening in the holders. The dust drawer is equipped with wheels, allowing easy extraction during disposal of the dust. The centrifugal fan with a flanged electric motor and the fan / motor unit is built up in the filter housing - the motor is bolted with its flanges on the filter housing and surrounded by the sound enclosure.

By using REMFORM® screws to join synthetic materials, the cost of the inserts and the associated work step can be omitted in the injection process. The screw simply screws into an existing core hole, forming its own thread as it goes in. The asymmetric thread geometry of the REMFORM® screw ensures that the synthetic material flows towards the load flank as the thread is formed. Thus: low turning torques high vibration resistance low cracking risk high assembly reliability Additionally: The radial force offset to the radius enables a much higher tightening torque simultaneous with a smaller tube geometry. Result: much higher clamping force. Your commercial benefits: The overall cost of fastenings is reduced by up to 72%.

How the fastener functions The material is peeled and a collar formed so that a flush and positive fit of the fastener is created with the sheet metal material. This can either transfer very high forces (e.g. AX 20x14) or with the version that is flush with the sheet, the fastener can be used to directly mount connected parts (e.g. AX 16x4). This principle can be applied to almost every material. The benefits of the RIVORM® HR clinch nut one nut for all sheet metals up to 4.5 mm cost-saving due to fewer variants high-strength, press-hardened and hot-stamped steels very good torsional strength regardless of metal strength high pull-out force The benefits of the RIVORM® TR rivet for fitting ties and springs fully automated processing possible in the subsequent composite tool can be applied universally for different assembly jobs, such as fastening electrical control units, or other plastic parts, simply by clipping them in